XOR operation for Hex values
Dear Sir.
I must apply the Xor operation to 03, 01, 57 & values Hex C9.
The Calculater programmer I listed as: '03 Xor 01 Xor 57 C9 Xor = 9 c ". Finally, the output is 9 c.
How to implement the same operation LabVIEW?
Kind regards
Chick S
Try this
Tags: NI Software
Similar Questions
-
How to use as operator for several values
Hi all
I want to obtain the column values for the column - filed_name which ends by ('X 1', 'X 2' 'X 3' 'X 4' 'X 5' 'X 0' 'XA' 'XB' "XM" "XP" 'X' "CM" "MT") of the variable_info table
I tried to use as shown below
SELECT * FROM VARIABLE_INFO WHERE FieldName like (' %x 1 "," %X 0 ");
but getting error
ORA-00907: lack of right parenthesis
can someone tell me how to use as operator for multiple values?
Thank you/kumarYou need not a subquery, just make sure that you use parentheses to group your GOLD requirements
SELECT RELATION , FIELD_NAME , ATTRIBUTE , FIELD_DESCRIPTION, SOURCE FROM VARIABLE_INFO WHERE RELATION NOT IN ( 'CHAI', 'ITAB', 'ITB2', 'ITB3', 'MINI', 'NOTE', 'MINC', 'FINI', 'FTIM', 'FWTG', 'FMLY', 'FMIS', 'FSUM', 'MEMB' ,'FINC', 'FASO') AND (SUBSTR(FIELD_NAME,-2) in ('X1', 'X2' ,'X3', 'X4', 'X5', 'X0', 'XA', 'XB', 'XM' ,'XP' ,'CM','MT') OR substr(FIELD_NAME,-1) in ('X') OR substr(FIELD_NAME,1) in ('J') ) AND (ATTRIBUTE LIKE 'NUM%' OR ATTRIBUTE = '-') ;
The error you are getting sounds like a problem with the definition of VARIABLE_INFO. It seems the synonym or something that it points to rear edge
For example:
CREATE SYNONYM X FOR DUAL; CREATE SYNONYM Y FOR X; CREATE OR REPLACE SYNONYM X FOR Y; SELECT * FROM Y; SQL Error: ORA-01775: looping chain of synonyms
Kind regards
Bob -
between the operator for VARCHAR values
Hello
I'm trying to compare a value varchar between two varchar values that does not work.
for example in my table there are two columns.
FROMpcode (column1)
*****************
L6P 0 TO 1
L6A 0 TO 1
TOpcode (column2)
****************
L7E 5 S 1
L6A 4R1
the value I want to compare for between FROMpcode and TOpcode is L6S 6B 7. This is the query. This is comparison of Canadian postal code.
Select * from mytablename where L6S 6B 7 between FROMpcode and TOpcode
I can't convert FROMpcode, TOpcode in numbers because they are alphanumeric data.
Thanks for your help.
Techie_nasHello
[email protected] wrote:
This is the create table script.CREATE TABLE APPS.MYTABLENAME ( FROM_POSTALCODE VARCHAR2(7 BYTE), TO_POSTALCODE VARCHAR2(7 BYTE) )
and here is the sql insert code.
insert into mytablename values('L0N 1A0','L7K 2P9'); insert into mytablename values('L0N 1B0','L7K 1E3'); insert into mytablename values('L6P 0A1','L7E 5S1'); insert into mytablename values('L0N 1E0','L7K 2N5'); insert into mytablename values('L0N 1C0','L7K 3L3'); insert into mytablename values('L0P 1C0','L7C 3M3'); insert into mytablename values('L0N 1K0','L7C 3M1'); insert into mytablename values('L0N 1P0','L7K 0H5'); insert into mytablename values('L0P 1N0','L7K 1N6');
and when I run the sql code
select * from mytablename where 'L6S 6B7' between from_postalcode and to_postalcode
instead of only from the third row, I see all 9 lines in the results.
Why you should see only the third row? 'L6S 6B 7' is really between from_postalcode and to_postalcode of the 9 rows. Take the first row, for example:
insert into mytablename values('L0N 1A0','L7K 2P9');
'L6S 6B 7' comes after "L0N 1 to 0" in the sort order, because "L6" comes after "L0".
"L6S 6B 7" comes before "L7K 2 p 9' sort order, because"L6"comes before"L7"."Maybe you don't really want the BETWEEN operator at all.
Explain why you want the third line and not all the others and someone will help you code. -
I use a graph with a left and right axis (2 data sets). I try to use a slider to select a point in time (x) and the values of y in the two sets of data. I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.
GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)
Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:
Description: Used to change the y-axis which is associated with the bar graph.
When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS. Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor. -
10g BEEP format-number for negative values does not
Hi all
I tried the following methods to get the negative number locked up with symbols ().
1 update the mask of BI Publisher properties of field format to
"#, # 0.00;(#,##0.00).
2 tried the Oracle formatting options
<? format - number:A.INVOICE_AMOUNT; "PT999G999G999G999G999G999G999D00? >
What gives me the result as below,
Output value
23.45 23.45 - print correctly
-12.90 (12.90 - closing paren "")' does not print
Please help me get the parenthesis when generating the PDF file.
Thank you
I had the question.
This is the format that was used in your model
###,###,###,###,###,###,###,##0.00;(#)
The first half before; does the mask so no problem.
But after; which is for negative values and that is not the correct format.
Please use this format on the properties of form field that gives you good number format
#, ##0.00;(#,##0.00)
-
FDMEE mapping for a value empty in the cloud of SEEP
Because we cannot write scripts in SEEP Cloud, how you géreriez mapping for empty values from the source file?
For example, if the cost center is < white >, map it to C1111.
You could create a residual mapping, try fundamentally to the scope of all your entity with explicit values, between, multidim, in several parts, such as maps and let the last as mapping to map to C1111.
For example, if you have 5 entities A, B, C, D, E, you could create 5 explicit as cards:
A-> E1
B-> E2
C-> E3
D-> E4
E-> E5
and a supplement like the (residual) mapping
*-> C1111
Note: you must ensure that all other entities of vacuum are covered with your mappings but the residue.
Hope that helps
-
Adding new SCSI controller: "error string: invalid operation for the '0' device.»
Hello
I have a problem when I try to add a SCSI controller to a virtual machine.
I have this error:
Error string: invalid operation for the device '0'.
Lack of details: InvalidDeviceOperation
Here is my code:
my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");
my $controller = VirtualLsiLogicController-> new)
deviceInfo = > $info,
scsiCtlrUnitNumber = > '7'.
sharedBus = > VirtualSCSISharing-> new ('noSharing'),
busNumber = >-1,
key = >-1,
backup = > $backing_info,
controllerKey = > 100,
);
My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)
device = > $controller,
fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').
);
My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);
{eval
$vm_view-> ReconfigVM (spec = > $vmspec);
Util::trace (0, "Controller has been created. \n") ;
};
I don't know how to handle, or even how to solve problems.
Any ideas would be greatly appreciated.
Kind regards
Jeremy
I finally found a solution.
It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.
Here's the code used:
My = $controller_spec
VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0
device-online [0],
busNumber => $scsi_controller.
sharedBus => VirtualSCSISharing-> new ('noSharing')),
operation => VirtualDeviceConfigSpecOperation-> new ('Add'));
My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);
{eval
$vm_view-> ReconfigVM (spec-online $vmspec);
};
-
Hi gurus,
I try to hide the column to secure the table for a specified user, here are the details of the code that I use to apply security and DB:
Version of DB: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
Security features:
create or replace function kr_sec_function_papf (p_object_schema IN VARCHAR2,
nom_objet_p VARCHAR2)
return varchar2
as
p_nid varchar2 (200);
Whoami varchar2 (100);
Start
If SYS_CONTEXT (' USERENV', 'SESSION_USER' ") ="VPDTEST ".
then
p_nid: = 'national_identifier = national_identifier';
return (p_nid);
on the other
p_nid: = '1 = 2';
return (p_nid);
end if;
end kr_sec_function_papf;
/
Code to add the policy:
BEGIN
DBMS_RLS. () ADD_POLICY
object_schema = > 'APPS,'
object_name = > "PER_ALL_PEOPLE_F"
POLICY_NAME = > "secure_emp"
policy_function = > 'kr_sec_function_papf ',.
statement_types = > "SELECT."
sec_relevant_cols = > 'NATIONAL_IDENTIFIER ',.
sec_relevant_cols_opt = > DBMS_RLS. ALL_ROWS);
END;
/
I get the error message when executing the above plsql block, the error is:
ORA-28104: entry for sec_relevant_cols value is invalid
ORA-06512: at "SYS." DBMS_RLS", line 20
ORA-06512: at line 2
Someone please help me solve the problem.
Thanks in advance.
~ Krishna Nand Singh
Hello world
I had this problem to be solved.
The problem is with the object_schema-online 'APPS', setting the schema name of the object is 'HR' and APPS a with the same name.
The Correct code should be:
BEGIN
DBMS_RLS. () ADD_POLICY
object_schema-online 'HR ',.
object_name-online "PER_ALL_PEOPLE_F."
POLICY_NAME-online "secure_emp."
policy_function-online "kr_sec_function_papf."
statement_types-online "SELECT."
sec_relevant_cols-online "NATIONAL_IDENTIFIER."
sec_relevant_cols_opt-online DBMS_RLS. ALL_ROWS);
END;
/
Thank you
Krishna Nand Singh
-
monitor the DML operation for a table, that is, monitor the type time and DML operation
Hello expert,
I want to follow the DML operation for a table, i.e. monitor the time to type and the DML operation. you tell please how do I get that?
Thank you very muchSee if this can help you:
http://Oracle-Apps-DBA.blogspot.com/2007/07/monitoring-DML-operations.html
Kind regards
-
Report shows a string "null" for null values.
Hello
I am new to BI Publisher and creating a report in the BI Publisher. In the game of null values, report prints as "null". I checked the query, it gives data blank (empty value) for null values. But in the report, it comes as value 'null' (string "null"). I need to show the report in the form of empty data for null values. Can you please help me to find the solution for this?
Thank you much in advance.
Concerning
Garza.I responded to your cheque send only once.
-
Could not get the operation for SCC_PERSON_SYNC definition
Hi all
I get this error when trying to load data of candidates using EXCEL to CI.
The full error message is as
Unable to get the definition of operation for SCC_PERSON_SYNC. SCC_CONSTITUENT_MGR (2 928). UTIL. Name: PersonSAPublication of PersonSAPublication.OnExecute PCPC:55 statement: 2
Called from: SCC_PERSON_SOA_CONSUMER. PersonServiceConsumer.SCC_PersBioConsumer.OnExecute name: setData statement: 155
Called from: ADM_APPL_ENTRY1. GBL. SavePostChange statement: 3
Can anyone solution.
Kind regardsYou access the operation and verify its existence? PeopleTools > Integration Broker > Configuration of integration > Service operations
Search SCC_PERSON_SYNC - ensure that its there and ensure that his license. -
How to avoid the report for all values of roller running upward of guided navigation
Hello
Thanks in advance
I have 3 reports on three different pages of a dashboard. (Set up a navigation guided on a column of each report). When I click on the value of the column of guided navigation lead me to report 2 for this particular value (is invited), similarly for 3 report also so far it works great.
However when I go back to report 3 2 and 2-1, the reports are run for all the values for the value which has been adopted by the guided navigation of the previous report (on which I clicked to go to the next report of value) instead.
Published by: 808623 on November 9, 2010 02:10Use the ' back ' button.
Otherwise, history.back(-1) it will take you to the session previous search in Google to get the HTML code and place it in object HTML/text at the bottom of each page of dashboard
which will restore the last session he values he's running not not all previous values
Thank you
Saichand.v -
FDM to HFM: 'Access denied' when clicking on browse for target value
Hi all
I am a newbie in FDM. I am facing the following problem: whenever I try to map an account to an account in FDM HFM, I click on "Browse for target value. Each time, this gives an error: 'access denied '. The detailed error is:
+ "Error: access denied." +
+ Error reference number: {071079A5-AEB1-4B53-A777-F0CDE57B9433} +.
NUM: 0x80070005; Type: 1; DTime: 10/06/2010 02:52:58; SVR: IN-CCUBICOE2; File: CHsxClient.cpp; Line: 428; Worm: 11.1.1.3.0.2413; +.
NUM: 0x80070005; Type: 0. DTime: 10/06/2010 02:52:58; SVR: IN-CCUBICOE2; File: CHsxClient.cpp; Line: 888; Worm: 11.1.1.3.0.2413; +.
+ Line At: 393 "+"
Our deployment configuration (in a nutshell) is as follows:
IN-CCUBICOE2 server: A FDM (services and the web app)
IN-CCUBICOE3 server: A HFM (services and the web app)
FDM is configured with a local account to the server IN CCUBICOE2. This account is used to configure the application server process, application pool, etc., as well as to register the load balancer adapter.
HFM is configured with a different account local server IN CCUBICOE3.
I tried fiddling around with profiles machine in my cards. The current setting is:
Source: IN-CCUBICOE2
Target: IN-CCUBICOE3
(In the part of the credentials, I give the Hyperion credentials or windows credentials?)
The connection method is configured as unified. (but I also tried Global etc.)
(I installed the HFM client in the server of the CCUBICOE2-IN - residence of FDM and added the cluster of application like IN-CCUBICOE3 - to whom I can connect using the HFM customer)
Any help would be really appreciated.
Thank you
Chrystelle
Published by: sayantan.mondal on June 10, 2010 03:14Definitely. The local account with the same uid/pwd must exist on the servers of FDM, HFM and if the local account you created in the box of HFM, must exist in the FDM with the same uid/pwd box, and must be a member of the local administrator group. The same for the Local FDM account, it must exist on the servers of HFM and be a member of the local administrator group.
We urge the user to a domain service account to avoid having to create multiple instances of local accounts as you currently see.
-
Inline when checking for null values
Hi, I'm currently stuck with a problem regarding the verification of null values. The problem revolves around an address line, where I want to display values such as roadname, number, zip code etc. The address line is supposed to be on a single line, no carriage return. The address line must be prepared for null values, if we say it have no house number. That's why I am attaching these tags with an if statement:
& lt;if@inline:HOUSENUMBER!= "? & gt; & lt;? HOUSE number? & gt; & lt;? end if? & gt;
But when I try this in my report, it seems that @inline BEEP do not take into account the signal no one checking the logical expression and always showing the content enclosed in the case. When I remove @inline, it works as it should, but there is a carriage return when the value is zero.
Does anybody know a solution for this?
Thanks in advance
KimHi Kim
Hmmmm works for me. I noticed that you have a lack? just before the if. You can also try @inlines, it's a subtle difference in functionality.
Even without the FI doesn't text collapse left anyway?
Tim
-
Hello
Is there an API for creating value and the value of values in R12?
Thank you
Praveen
Published by: praveen Elvis on April 9, 2009 12:18 AMHello
Try FND_FLEX_VALUES_PKG API.
Oracle integration repository
http://IREP.Oracle.comR12, repository integration Oracle is shipped as part of the E-Business Suite (as a responsibility).
Kind regards
Hussein
Maybe you are looking for
-
What does X 11? Why would anyone want it?
What does X 11? Why would anyone want it?
-
HP envy 6 - 1010sv: left hinge broke, about to break
Hello! I have the 6-1010sv envy and the left hinge broke. From what I've read in the forums, this is a very common problem. Right now I'm looking for my repair options. I called the phone number, I found in the forums and they said since it is a guar
-
A very strange problem with DVD player (some DVD play not)
Hello everyone. I bought a laptop Dell Inspiron 3543 2 months ago. Overall, I am very satisfied with this product, but I have a problem with the DVD player. When I insert some DVD discs, the driver reads some DVDs but not others. After trying to play
-
HelloSo I just download After Effects for Mac (El Capitan) and when I try to run Adobe animation character in trial mode, I get an error like that, "there is no: /Users/ < useraccount > / Documents/Adobe/character animator/Preview 4/Getting Started P
-
InDesign cc 2015 crushing at the launch
My InD CC 2015 will not open. It crashes at startup. I emptied cache files, remove the fonts all folders, rebooted, uninstalled... all I can think about and I has a period of 2 days. I'm on Yosemite and my Photoshop & Illustrator CC 2015 both work.