XP SP2 Start Up disk to remove the error GRUB 22

Similar Questions

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• I have a Canon MG6120. When I start it up I get the error code 5050. Does anyone know how to fix this?

  I have a Canon MG6120 all-in-one. When I start it up I get the error code 5050. Does anyone know how to solve this, more power to the wide / power?

  Hello gregg.

  Please, try the following to see if we can solve your problem:

  1. turn off the printer.

  2 disconnect the power from the printer for at least 5-10 minutes.

  3. once unplugged, remove any paper from the device.

  4. check for obstructions in the paths of the unit or the paper.

  5 If no obstacles are, plug the power back in and switch on the device.

  If the problem persists, the unit will require repairs for the correction.  We apologize for the inconvenience.  Please contact our support group using the 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help at the Contact Us.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move

• Suddenly V. slow start-up - how to remove the 'mouse Microsoft & detection (USB) keyboard driver?

  OK, I have a common problem with starting my PC under Windows 7 64-bit. It was all pretty quick start for the last month or so that I had installed. Then it started to freeze for several minutes (anything from 5 minutes to 10 minutes) during boot to the Windows loading screen.

  Since then, I tried different things so he can start normally once again, including the tings which should theorectically not affect him as they have all been there before this problem started and starting very well, this includes:

  Looking at these latest material changes such as I added HD
  Change the SATA disks on (I've got 3)
  Get startup in MSconfig to use cores max (this is a quad core) & memory (4 GB)
  By looking at the files bootlog (Nothing don't jump other than I apparently trying to load a couple of drivers twice - I have listed this morning at the bottom of this message for reference bootlog)
  Recovering to a point a month before the problems started in the hope that it will be possible to uninstall the newer drivers that might be the problem, and that's where I noticed what I believe could be the cause, as seems to be the point where it went wrong.

  I had added a Microsoft Mouse and keyboard and the WU offered an optional update from:

  Microsoft Microsoft mouse - other hardware - & detection (USB) keyboard driver

  After installation of this I'm pretty certain that the softstart right down, so I tried to uninstall it. Only I can't find a way to do it. Like when I do a restore of the system to a point before the driver install and the problem that occur, this is not the driver, that just seems to keep. I then uninstalled Intellipoint mouse and keyboard and re-installed mouse PS2 standard. At the same time, I removed my Microsoft Mouse Wireless USB keyboard &, all without effect. I restored my system again and I'll be back to what, according to me, the problem is who is the...

  Microsoft Microsoft mouse - other hardware - & detection (USB) keyboard driver

  But with no obvious way or to withdraw, I can't confirm that.

  Other notable points:
  During the startup, the HD access is constant, so it works like crazy.
  The keyboard will be insensitive to things like capslock or numlock if for the first six months of waiting, when NumLock is on and for the second half of waiting, when NumLock is off. I think that my default setting is for numlock off the coast.

  Help, it's torture, especially when you see that the sub boots 10 seconds on the web.

  Cheers, Jamie.

  For reference: ntbtlog.txt
  Microsoft (R) Windows (R) Version 6.1 (Build 7600)
  10:33:29.421 1 11/2010
  Loaded driver \SystemRoot\system32\ntoskrnl.exe
  Loaded driver \SystemRoot\system32\hal.dll
  Loaded driver \SystemRoot\system32\kdcom.dll
  Loaded driver \SystemRoot\system32\mcupdate_GenuineIntel.dll
  Loaded driver \SystemRoot\system32\PSHED.dll
  Loaded driver \SystemRoot\system32\CLFS. SYS
  Loaded driver \SystemRoot\system32\CI.dll
  Loaded driver \SystemRoot\system32\drivers\Wdf01000.sys
  Loaded driver \SystemRoot\system32\drivers\WDFLDR. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\ACPI.sys
  Loaded driver \SystemRoot\system32\DRIVERS\WMILIB. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\msisadrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vdrvroot.sys
  Loaded driver \SystemRoot\System32\drivers\partmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\volmgr.sys
  Loaded driver \SystemRoot\System32\drivers\volmgrx.sys
  Loaded driver \SystemRoot\system32\DRIVERS\intelide.sys
  Loaded driver \SystemRoot\system32\DRIVERS\PCIIDEX. SYS
  Loaded driver \SystemRoot\System32\drivers\mountmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\atapi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ataport. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\amdxata.sys
  Loaded driver \SystemRoot\system32\drivers\fltmgr.sys
  Loaded driver \SystemRoot\system32\drivers\fileinfo.sys
  Loaded driver \SystemRoot\System32\Drivers\PxHlpa64.sys
  Loaded driver \SystemRoot\System32\Drivers\Ntfs.sys
  Loaded driver \SystemRoot\System32\Drivers\msrpc.sys
  Loaded driver \SystemRoot\System32\Drivers\ksecdd.sys
  Loaded driver \SystemRoot\System32\Drivers\cng.sys
  Loaded driver \SystemRoot\System32\drivers\pcw.sys
  Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.sys
  Loaded driver \SystemRoot\system32\drivers\ndis.sys
  Loaded driver \SystemRoot\system32\drivers\NETIO. SYS
  Loaded driver \SystemRoot\System32\Drivers\ksecpkg.sys
  Loaded driver \SystemRoot\System32\drivers\tcpip.sys
  Loaded driver \SystemRoot\System32\drivers\fwpkclnt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\volsnap.sys
  Loaded driver \SystemRoot\System32\Drivers\spldr.sys
  Loaded driver \SystemRoot\System32\drivers\rdyboost.sys
  Loaded driver \SystemRoot\System32\Drivers\mup.sys
  Loaded driver \SystemRoot\System32\drivers\hwpolicy.sys
  Loaded driver \SystemRoot\System32\DRIVERS\fvevol.sys
  Loaded driver \SystemRoot\system32\DRIVERS\disk.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CLASSPNP. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys
  Loaded driver \SystemRoot\System32\Drivers\Null.SYS
  Loaded driver \SystemRoot\System32\Drivers\Beep.SYS
  Loaded driver \SystemRoot\System32\drivers\vga.sys
  Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys
  Loaded driver \SystemRoot\system32\drivers\rdpencdd.sys
  Loaded driver \SystemRoot\system32\drivers\rdprefmp.sys
  Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS
  Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS
  Loaded driver \SystemRoot\system32\DRIVERS\tdx.sys
  Loaded driver \SystemRoot\system32\drivers\afd.sys
  Loaded driver \SystemRoot\System32\Drivers\aswRdr.SYS
  Loaded driver \SystemRoot\System32\Drivers\aswTdi.SYS
  Loaded driver \SystemRoot\System32\DRIVERS\netbt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wfplwf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pacer.sys
  Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serial.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys
  Loaded driver \SystemRoot\system32\drivers\nsiproxy.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys
  Loaded driver \SystemRoot\System32\drivers\discache.sys
  Loaded driver \SystemRoot\System32\Drivers\dfsc.sys
  Loaded driver \SystemRoot\system32\DRIVERS\blbdrive.sys
  Driver loaded \SystemRoot\System32\Drivers\aswSP.SYS
  Loaded driver \SystemRoot\system32\DRIVERS\tunnel.sys
  Loaded driver \SystemRoot\system32\DRIVERS\intelppm.sys
  Loaded driver \SystemRoot\System32\drivers\dxgkrnl.sys
  Loaded driver \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HDAudBus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\Rt64win7.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbuhci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\parport.sys
  Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys
  Loaded driver \SystemRoot\System32\Drivers\GEARAspiWDM.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CompositeBus.sys
  Loaded driver \SystemRoot\System32\Drivers\RootMdm.sys
  Loaded driver \SystemRoot\system32\drivers\modem.sys
  Loaded driver \SystemRoot\system32\DRIVERS\AgileVpn.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rassstp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\RimSerial_AMD64.sys
  Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys
  Loaded driver \SystemRoot\system32\DRIVERS\umbus.sys
  Did not load driver \SystemRoot\System32\drivers\vga.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys
  Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Loaded driver \SystemRoot\system32\drivers\RTKVHD64.sys
  Loaded driver \SystemRoot\system32\drivers\ksthunk.sys
  Loaded driver \SystemRoot\system32\DRIVERS\monitor.sys
  Loaded driver \SystemRoot\system32\drivers\luafv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\aswMonFlt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\aswFsBlk.sys
  Loaded driver \SystemRoot\system32\drivers\WudfPf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\irda.sys
  Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
  Loaded driver \SystemRoot\system32\drivers\HTTP.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys
  Loaded driver \SystemRoot\System32\drivers\mpsdrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb10.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb20.sys
  Loaded driver \SystemRoot\system32\drivers\peauth.sys
  Loaded driver \SystemRoot\System32\Drivers\secdrv. SYS
  Loaded driver \SystemRoot\System32\DRIVERS\srvnet.sys
  Loaded driver \SystemRoot\System32\drivers\tcpipreg.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
  Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\asyncmac.sys

  OK a 2 TB disk format seems to cure the problem, or really a partial format because I got bored with the format after 6 hours as she possessed only at 3%, so I canceled and then quick formatting. Spin checkdisk on it now.

  Boot times are back to void / 1 min. Hooray!

  Incidentally. Once I have re-installed the keyboard and mouse wireless MS, sneaky win 7 is gone and automatically downloaded driver USB again of him is own agreement. Well.

  Thanks for your help,

  Jamie.

• Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

  Present a strange problem that I can't solve.

  Brand new, open all laptop worked perfectly.

  Turned off normally and left it overnight with the power supply connected.

  Next day morning pushed the button market / stop the portable green power on but light did not start.

  Press and hold the button for 10 seconds does nothing.

  I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

  Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

  This problem occurs only when it is off and that the power is plugged in for several hours.

  Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

  10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

  I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

  Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

  Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

  I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

  Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

  All the ideas that I'm completely stuck on this one!

  Sorry to hear you I have a problem with your laptop.
  Problem you have is certainly hardware related issue and it should be solved by Toshiba.
  In my opinion you should not spend money for new parts, trying to solve this problem.

  Laptop warranty valid and should be set the laptop for free.

• password on HP pavilion home pc used I'll start PC how to remove the password of owner he ask to log

  I bought a pc at a yard sale and the guy gave me a password, but it does not work what can make the password on HP pavilion windows xp home edition and it won't let me boot pc how to remove the owner password it asks to connect to windows? is there a jumper to remove the old?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I understand that you want to remove the password on computer xp. Let me help you with the issue.

  1. were you able to get to the desktop screen earlier?

  2. what security software is installed?

  3. have you made changes on the computer recently?

  4. have you SP 3 installed update?

  To resolve this issue, let us try these methods:

  Method 1.

  Start the computer in safe mode and try to connect to the admin user account.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2.

  You can create a new admin user account and check the status.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• Installing Win7 Enterprise by PXE and tried by disk. Get the error message at the point "Setup starts services. What is the solution?

  The message reads: "the computer restarted unexpectedly or encountered an unexpected error."  Windows Setup cannot continue.  To install Windows, click OK and restart the computer, and then restart the installation. »

  Found and answer to change the registry via the command prompt, but cannot get to the command prompt and SHIFT + F10 for the error message screen is unresponsive.  Disk install also-error to the exact place.ed even to install via disk and got the same error at the same place.  Other options available?
  Thank you.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Manual search - when start us research by removing the value manally, same results for future research in the next page.

  Hi guys OAF.

  Created a page of manual search with several buttons below. After entering search criteria and click on the first button, it shows the records in a separate page where I perform trade operations. The second page, I have a "back to the main search" link that takes me to the first page of search.

  Now, if I remove the value of any field of text input by clicking X mark the end of the field, or pressing the button remove the key board and try searching again, same values are to come in the next page as if I did not remove the value.

  Data on the next page is mainly with the help of setWhereClause. And here is the code I wrote.

  public void issueQuery (String OrderNum)

  {

  If ((OrderNum! = null) & & (!("".)) Equals (OrderNum.Trim ()))

  {

  setWhereClause ("ORDER_NUMBER =: 1");

  setWhereClauseParams (null); Always reset

  setWhereClauseParam (0, OrderNum);

  }

  executeQuery();

  }

  Please advice, what has gone wrong or its something Oracle behavior?

  Thank you

  Bideau

  I got the answer, it is resolved after the setwhereclause reset each time.

• Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057

  So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.

  At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.
  I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.
  Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!
  I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.
  Since I was:
  -Make sure SSD has been selected for AHCI (it was already on it)
  -Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
  -Run Diskpart to repair the boot with these commands:
  -diskpart
  -disk list
  -select disk 0
  -clean
  -output
  Same error code came again after attempting to reinstall. So I tried a few other commands:
  -diskpart
  -disk list
  -select disk 0
  -clean all the
  at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.
  Someone please help!

  Try to create the new partition and do. for example, to verify the steps for Windows 7-

  http://support.Microsoft.com/kb/2476568/en-us

  Likewise, create a partition first.

• I have a lot of things to add or remove section in the control panel which can also remove how to remove the error log please thank you

  What kind of things can I delete on my computer to make the space.i downloaded lots of stuff you want to find and remove the it.thankyou much novice user

  We do not know what you download and what you have installed so difficult to answer.

  If you have installed some stuff and you want more, then Yes, uninstall it from Add/Remove.

  Regarding the error log - are what error paper you referring?

  FYI - http://support.microsoft.com/kb/310312
  Description of the tool in Windows XP disk cleanup

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

  There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
  Please help me to remove it from my computer!

  Hello lala80,

  Thank you for using Microsoft Vista answers Forum!

  hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

  You can disable this feature by using msconfig in Windows.

  Click Start and type msconfig in the search box and press enter

  Click the Start (top row)

  In the list of programs, uncheck hpqtra08.exe

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Satellite L650D - after removing the error wireless security Norton occurs

  I deleted Norton security center today that it had expired, and now I get this error when connecting to a wireless network. It is said that he has limited the network connection, when I run it it says cannot resolve the error and advanced details of diagnosis gives me this message.

  "Windows could not automatically bind the ip on the network card protocol stack.

  I tried to update the driver and the system restore.
  Any suggestion would be appreciated

  Data sheet:
  Satellite L650D
  Broadcom 802.11n wireless network adapter
  Windows 7 Home premium 32-bit

  Hello
  There are different reasons for this.
  Someone wrote that the ZoneAlarm firewall could block the wireless network adapter.
  In this case, I would recommend removing the system Zonealarm.

  Another said that he could solve this problem by unplugging or resetting the router.

  Also try to disable the wireless card in Device Manager.
  Then restart the laptop and activate the card LAN once more.

  Good luck

• How to remove the error-120 code in labview?

  Hi all

  I use to communicate with the keithley 2410 13 LabVIEW and GPIB device.

  I made a program of sweeping the stairs of programming using keithley 2400 user manual, but on the interfacing it gives 'error code-120' i.e. error of digital data.

  Can someone tell me please how to remove this error and also check my program with orders.

  Concerning

  sak16091991

  Hi sak.

  you determine the exact command, which gives this message 'error - 120' of the Keithley.

  ymanglik should be able to explain the procedure now, it uses the same device with similar problems

  I guess it's related to this part of the code:

  

  What is the reason to use FormatIntoString here? Why add a constant number to string? Why not just write the number in the string constant? Where should the number be attached? Everything in the end?

  BTW. you don't need this structure of sequence - it's all in the stream!