XP SP3 KB2296011 Setup error

Similar Questions

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• DAQmx Setup error

  I have a brand new with Windows7 - 64 bit.  I installed LV 2010 RT, FPGA and all drivers. No problem.  I then installed LV 2012 with RT, FPGA, a few tools and drivers.  I got an error when installing on DAQmx.  I told him to continue.  Then, I got an error at the end saying that something was not installed correctly.  The two messages are attached below.  I have uninstalled all NOR associated and repeated.  Same result.  I can open and run LabVIEW 2010 and 2012.  I can open MAX.  However, when I attach a USB-6008 to the computer, it is said that the driver is not loaded.  MAX can't see the 6008.  Which, of course, corresponds to the Setup error.  Any ideas how can I fix?

  Thank you

  DaveT

  Hi Dave,.

  This problem is often related to anti-virus software. You have any antivirus running on your new computer software? If you do, please try to uninstall DAQmx, disable the active virus scan utility and install the drivers as administrator.

  I hope this helps! Thank you

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• Security update for Windows XP (SP3) KB977914 install, error Code: 0xD0000135. Can someone provide a fix?

  Security update for Windows XP (SP3), KB977914, install, error Code: 0xD0000135.

  Can someone provide a fix for the error Code: 0xD0000135? I tried to update 5 times since 09/15/11.

  Thank you very much.

  Cynthia

  Hello

  first of all – have you tried to download and install this update manually? If this isn't the case, you can download it from here (the good language):

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16170

  LC

• Windows Automation api. Setup error: cannot update your XP files because the language installed is different from the update.

  Installing Win AP Automation! 3.0 to accelerate VB Express 2010.

  Warning message:

  Update for MS Wim (KB971513) Setup error

  Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  My XP language is Norwegian. The rest of my 'stuff' MS is English.

  
  

  • What you have already tried to solve the problem

  Hello

  I suggest you to check the article mentioned below.

  Error message: Setup cannot update your Windows XP files

  http://support.Microsoft.com/kb/555042

  I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage

• I have Windosx XP Media Center Edition 2002 SP2, whenever I try to install sp3, that an error and I need to go to a previous configuration, what do I do to be able to install sp3?

  I have Windows XP Media Center Edition 2002 SP2, whenever I try to install sp3, that an error and I need to go to a previous configuration, what do I do to be able to install sp3?

  I have enough information about your computer to give you assistance-oriented. This might help:

  How to troubleshoot an installation fails to WinXP SP3 - http://support.microsoft.com/kb/950718 MS - MVP - Elephant Boy computers - don't panic!

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• Windows 7 Ox80070017 Setup error

  Good then I got an installation disc that made the files it contains and appear on my computer but I have a new problem now in which an error pops up saying that some files are not which is really unfortunate. The error code I get is: Ox80070017

  original title: Windows 7 Setup error

  Hi Mohamed Kebbay,

  Error code 0 x 80070017 means generally bad media. I would recommend that you download the file again, you may have corruption in ISO itself. So if possible, download the file again. After you download the new copy, try burning at a lower setting 4 X or 8 X speed. Once you burn the disc on a lower setting with the new ISO standard, and then see if you can install Windows 7.

  See installation and reinstallation of Windows 7 for more information on installing Windows 7.

• BlackBerry World: "application setup error".

  I made a simple program called "Custom dice. When I launch from the NDK BlackBerry on my Dev Alpha, it works fine. However, when I try to install my application on BlackBerry World, I get this rather vague error message: "application setup error". Is attached a screenshot of this error. I have absolutely no idea what could cause this error. Someone has any advice how to solve this problem, what I could do to find the cause of this error? Thank you!

  I can confirm that the application now installs fine. What gives some help apparently contributed time

• Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  I'm trying to reinstall Google Chrome on my Windows 7 Home Premium Service Pack 1 computer laptop.  I uninstalled google Chrome and tried to reinstall it on my Windows 7 laptop.  I can download the installation file or install dynamically without having to download the file.  The installer of Google Chrome runs, but at the end of the operation, I receive the error message 'unable to cache the installation program downloaded. "Error: 0 x 80070002.  I tried to install Chrome with IE9 and Firefox 10.0.3

  PC: Dell Studio 1557
  Processor: Intel Core i7
  RAM: 4 GB
  System type: 64-bit operating system

  Hello

  1. are you able to install any other program normally?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Put the computer to boot and then try to install Google chrome.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: after the troubleshooting steps, please return the computer to start as usual (see step 7 link mentioned above)

  Method 3:

  Follow the instructions in the link below.

  http://support.Google.com/installer/bin/answer.py?hl=en&answer=126299

  I suggest also please contact the support team of Google for assistance.

  http://support.Google.com/chrome/?hl=en