XP starts from the USP port to which is attached a HP Photosmart 5520 e-all-in-one printer

Similar Questions

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• Analyze the capacity of 5520 e-all-in-one printer to two computers

  I have an e-all-in-one printer Photosmart 5520 initially, I installed on my PC (windows). I downloaded the software for it on my MacBook Pro (snow leopard) successfully and print but having difficulty scans to my laptop. I activated the web analysis and can scan & e-mail scan from my laptop. When I tried to "Add a printer" (my laptop) on the HP site and entered the code request for the printer, I received a message that the printer has already been added to another computer and is limited to one account.  I have the HP Utility icon on my laptop computer desktop, but not the printer HP 5520 icon series that I have on the desktop PC that I would choose to get the print screen & scanning.  How can I configure my laptop up to be the same as the PC?  Thanks for any advice you can give... I'm lost :-(

  Try scanning from your Mac. Use Image Capture app in your Applications folder.

  Click once on the scanner on the left side, and then click Show details on the background. Along the right side you will see MANY options for scanning and recording.

• INK CARTRIDGE 364 (BLACK) DOES NOT MATCH THE HP PHOTOSMART WIRELESS E-ALL-IN-ONE PRINTER

  AT THE END OF THE YEAR, I BOUGHT THE HP PRINTER PHOTOSMART WIRELESS E-ALL-IN-ONE (B110A).  I REPLACED THE COLOR (364) CARTRIDGES, BUT THE CARTRIDGE BLACK (364), I BOUGHT IS NOT SAME SIZE ONE PROVIDED WITH THE PRINTER, IT IS MORE SMALL AND DOES NOT FIT IN THE SLOT.  DOES ANYONE ELSE HAVE THIS PROBLEM?  NOW PRINTER CANNOT USE AS BLACK IS EMPTY AND CANNOT REPLACE IT AS THE 364 PROVIDED WITH THE PRINTER IS DIFFERENT FROM THE PURCHASED SEPARATELY.  VERY FRUSTRATING.

  Thank you

  KERRY

  Thank you Carolyn.  I'll get to watch the 564 cartridge.  Thank you very much for your hope to answer that I can get this resolved otherwise it's back to the PC with the printer world for a refund!

  Thank you

  Kerry

• How the program REDOWNLOAD SHREDDER64. MSI? Windows 7 and HP 4620 all-in-One Printer

  I have to clean programs unused and deleted the Shredder4.msi, which I just found out that I must have to operate properly the functions of my

  4620 all-in-One Priner/Fax/Scanner HP.

  I looked and looked and can't find the program to reinstall.

  I would appreciate any direction that could help me in this company?

  Kind regards

  Judy

  * E-mail address is removed from the privacy * or

  E-mail address is removed from the privacy *.

  I recommend that you check with HP.

  You still have the CD that came with the printer?

  It is suitable for this topic.

  Edit: You have an ACER computer?

  They have a preinstalled by Egistec shredder program.

• When the pilots of Windows 8 will be available for my Dell 948 All In One Printer?

  This printer works perfectly on my XP machines but will not connect to my new laptop Windows 8. The W8 laptop cannot find wireless printer to complete the installation. Any word on when an updated driver will be available?

  Thank you!

  Don

  Hi Don,

  According to the compatibility of Windows 8 with printers Dell printer 948w is incompatible. We can try to install the drivers for Windows 7 in compatibility mode and check if it works.

  If the 64-bit operating system, click here to download and save the drivers for Windows 7 64-bit on the computer and then click here to install the file in compatibility mode.

  If the 32-bit operating system, click here to download and save the drivers for Windows 7 64-bit on the computer and then click here to install the file in compatibility mode.

  Step to be followed after the driver for Windows 7 is downloaded on the computer:

  1. Right-click on the name of the file
  2. On the left, you click Properties.
  3. Click on Compatibility tab, and then check the box for run this program in compatibility mode and change the operating system to Windows 7.
  4. Click on apply and Ok.

  Then install the program on the computer by following the instructions on the screen.

  NOTE: Please do not connect the printer using the USB cable to the computer before installing the drivers.

  Kindly let me know the results.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  [root@esx011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0

  [root@esx011 /] # wwpn.pl - v
  WWPN 1.02 Copyright VMware 2003
  Display the names of WW and VMHBA ports for fiber channel cards
  For each relevant here are the Qlogic vmhba and names of Port Emulex WW
  Adapter WWPN PCI (decimal)
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0 / proc/scsi/qla2300/2
  vmhba0:0: scsi-qla0-port-0 5005076300c7b4a2 = 5005076300c0b4a2:5005076300c7b4a2;
  vmhba0:10: scsi-qla0-port-10 500507680110b79d = 500507680100b79d:500507680110b79d;
  vmhba0:11: scsi-qla0-port 5005076300cc9561 - 11 = 5005076300 c 09561: 5005076300cc9561;
  vmhba0:12: scsi-qla0-port-12 5005076300c80db4 = 5005076300c00db4:5005076300c80db4;
  vmhba0:13: scsi-qla0-port-13 5005076300cbb0b1 = 5005076300c0b0b1:5005076300cbb0b1;
  vmhba0:1: 500507630308414 d scsi-qla0-port-1 = 5005076303ffc14d:500507630308414 d;
  vmhba0:2: 500507630313414 d scsi-qla0-port-2 = 5005076303ffc14d:500507630313414 d;
  vmhba0:3: scsi-qla0-port-3 5005076300c7b0b1 = 5005076300c0b0b1:5005076300c7b0b1;
  vmhba0:4: scsi-qla0-port-4 5005076300cbb4a2 = 5005076300c0b4a2:5005076300cbb4a2;
  vmhba0:5: scsi-qla0-port-5 5005076300cca01d = 5005076300c0a01d:5005076300cca01d;
  vmhba0:6: scsi-qla0-port-6 5005076300cc0db4 = 5005076300c00db4:5005076300cc0db4;
  vmhba0:7: b 500507680140, 799 scsi-qla0-port-7 = b 500507680100 799:500507680140 b 799;
  vmhba0:8: scsi-qla0-port-8 5005076300cfa01d = 5005076300c0a01d:5005076300cfa01d;
  vmhba0:9: 5005076300 c 89561 scsi-qla0-port - 9 = 5005076300 c 09561:5005076300 c 89561;
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0 / proc/scsi/qla2300/3
  vmhba1:0: scsi-qla1-port-0 5005076300d0a01d = 5005076300c0a01d:5005076300d0a01d;
  vmhba1:10: scsi-qla1-port-10 5005076300cf0db4 = 5005076300c00db4:5005076300cf0db4;
  vmhba1:11: 500507630318414 d scsi-qla1-port-11 = 5005076303ffc14d:500507630318414 d;
  vmhba1:12: 5005076300 c 49561 scsi-qla1-port - 12 = 5005076300 c 09561:5005076300 c 49561;
  vmhba1:13: 5005076300 d 09561 scsi-qla1-port - 13 = 5005076300 c 09561:5005076300 d 09561;
  vmhba1:1: scsi-qla1-port-1 5005076300c4b4a2 = 5005076300c0b4a2:5005076300c4b4a2;
  vmhba1:2: b 500507680130, 799 scsi-qla1-port-2 = b 500507680100 799:500507680130 b 799;
  vmhba1:3: scsi-qla1-port-3 5005076300c4b0b1 = 5005076300c0b0b1:5005076300c4b0b1;
  vmhba1:4: scsi-qla1-port-4 5005076300d0b0b1 = 5005076300c0b0b1:5005076300d0b0b1;
  vmhba1:5: scsi-qla1-port-5 5005076300c4a01d = 5005076300c0a01d:5005076300c4a01d;
  vmhba1:6: 500507630303414 d scsi-qla1-port-6 = 5005076303ffc14d:500507630303414 d;
  vmhba1:7: scsi-qla1-port-7 500507680120b79d = 500507680100b79d:500507680120b79d;
  vmhba1:8: scsi-qla1-port-8 5005076300d0b4a2 = 5005076300c0b4a2:5005076300d0b4a2;
  vmhba1:9: scsi-qla1-port-9 5005076300c30db4 = 5005076300c00db4:5005076300c30db4;
  [root@esx011 /] # vdf h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  vmhba0:0:0:1 91 82 G 8.5 G 90% / vmfs / vmhba0:0:0:1
  vmhba0:1:10:1 15 G 15 G 0% 7.0 M / vmfs / vmhba0:1:10:1
  63 7.7 M 63 0% G G vmhba0:1:11:1 / vmfs / vmhba0:1:11:1
  vmhba0:1:1:1 63 63 G 0 100% / vmfs / vmhba0:1:1:1
  vmhba0:1:2:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:2:1
  vmhba0:1:3:1 63 63 G 0 100% / vmfs / vmhba0:1:3:1
  vmhba0:1:4:1 63 63 G 0 100% / vmfs / vmhba0:1:4:1
  vmhba0:1:5:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:5:1
  vmhba0:1:6:1 63 63 G 0 100% / vmfs / vmhba0:1:6:1
  vmhba0:1:7:1 63 63 G 0 100% / vmfs / vmhba0:1:7:1
  vmhba0:1:8:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:8:1
  vmhba0:1:9:1 63 63 G 0 100% / vmfs / vmhba0:1:9:1
  vmhba0:5:0:1 59 G 14 G 44 G 24% / vmfs / vmhba0:5:0:1
  vmhba0:6:3:1 29 G 14 G 14 G 49% / vmfs / vmhba0:6:3:1
  37 G 35 G 1.7 G 95% vmhba0:6:6:1 / vmfs / vmhba0:6:6:1
  vmhba0:7:0:1 499 G 450 G 49 G 90% / vmfs / vmhba0:7:0:1
  7.4 G 7.3 G 180 M 97% vmhba0:9:0:1 / vmfs / vmhba0:9:0:1
  37 G 36 G 1001 M 97% vmhba0:9:1:1 / vmfs / vmhba0:9:1:1
  vmhba0:9:3:1 G 7.4 7.4 G 0 100% / vmfs / vmhba0:9:3:1
  vmhba2:0:0:8 39 G 39 G 29 M 99% / vmfs / vmhba2:0:0:8
  [root@esx011 /] # df h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  [root@nbxva011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0
  [root@esx011 /] # cat /etc/lilo.conf
  command prompt
  Timeout = 50
  boot = / dev/sda
  install=/boot/boot.b
  linear
  default = esx

  image=/boot/vmlinuz-2.4.9-e.71smp
  label = linux
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71smp.img
  read-only

  image=/boot/vmlinuz-2.4.9-e.71
  label = linux-up
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71.img
  read-only

  image=/boot/vmlinuz-2.4.9-vmnix2
  label = esx
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-vmnix2.img
  read-only
  Append = "mem = 800M cpci = 0: *;" 1 : * ; 2 : * ; 3 : ; 4:5:0; 7:0; 9 : * ; 10:; 11:; 12: *; 14:; 15: *; 17:; 18: *; 20:; 21: *; 23:; 24: *; 26:; 27: *; 29:; »

  It's client server which I can not restart the server boot or HBA settings view.

  All points will be awarded.

  Thank you

  And in MUI - HBA is not shared with Service Console

• Equium A60: is it possible to boot from the USB port?

  Hello

  I have an EQUIUM A60 with BIOS Version 1.90 is possible for a start of the USB port using an instead of a floppy mass storage device if yes how?

  Hello

  You can boot from the USB ports with a floppy drive floppy drive. You cannot boot from USB HDD or USB
  Boot devices: HDD, ODD, LAN, USB - FDD

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.

  

• Scan a multi-page document starting from the plateau of HP Officejet Pro 8600?

  Before Windows/7, which I use in 64-bit mode, we had Solution Center HP, which has supported the scanning multipage documents starting from the tray (e.g., scanning several pages of a document linked (for example, a book)) in a single PDF multipage doc.  HPSC has apparently been replaced by HP Scan, et al.  I have a new HP OfficeJet Pro 8600, and there seems to be NO WAY to SCAN SEVERAL PAGES OF A BOOK IN A SINGLE PDF DOCUMENT of several PAGES.  Help me to solve this problem or give me HP Solution Center.

  Thank you

  Jim

  No problem at all. It's understanbable. If you encounter other problems, feel free to ask.

• In the DC series models starting from the IDE hard disk?

  In addition to above question - are you able to use sata cd rom on machines that have the ide and sata connectors and boot from the drive hard ide?

  Thanks in advance

  cpu201

  Hello:

  The last model that came standard with a HDD IDE was the d530. From the dc7100, primary hard drives are SATA, and starting with the dc7800 is not an IDE connector on the motherboard at all.

  You may be able to boot from an IDE hard drive in a dc7700 and earlier versions, but you will need to remove the optical drive to the primary IDE cable position and place it in a secondary position, and that's if you can get the cable to fit. Otherwise, a SATA optical drive must be connected to the SATA 2 port.

  The d530 starts natively on the IDE HDD and you can add a SATA optical drive to the sata port 1 and always start from the HARD disk.

  Paul

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.