Y at - it a hope? = Drive 0: maxtor 6y080m0 - fail. return code 7

Similar Questions

• Return code from the hard drive 7

  It is a problem with my friends - a Dimension 3100 desktop, so I apologize if details aren't here.

  The Office was working perfectly until about a week ago. One day, when my friend made a blue screen of death was presented, so he tried another couple of times without success with the same blue screen showing up at startup.

  So I activated yesterday and tried to let this startup in windows, strangely windows worked well without error or whatever.

  I then tried by pressing F12 at startup and run diagnostic tests. He then told me the hard drive failed (Return Code 7).

  After a bit of "Googling" seems to me the average return code 7 hard drive failure. The strange part is that windows now it works as if nothing ever happened.

  Does anyone know what is the problem?

  Did that mean it's time to buy a new hard drive?

  
  

• Hard Drive short DST check failed

  FAILURE ID: 9TXMAW-7RH88Q-XD7WMF-60RN03

  Whenever the hard drive test short DST fails indicating that the hard drive has failed and which needs to be replaced to solve the problem

  This problem could be due to an Application or a driver conflict, virus issues, corruptions of files due to incompatible applications, incorrect judgments, update failures due to conflicts, mounted sudden power so portable, sudden falls etc...

  HP will offer a replacement HDD if the laptop warranty is Active, otherwise you can buy a SATA hard drive in a nearby retail store

  Please make sure that you get at least equal as long as the original one in order to use recovery disks. If you need you can buy a bigger, but not smaller hard drive capacity. For example, if you have a 500 GB hard drive you can improve it to 750 GB hard drive, but not 320 GB hard drive

  Please try the troubleshooting below indicated once the steps:

  Step 01. Remove the battery and unplug the power adapter AC.

  Step 02. Press and hold the power button for more than 30 seconds

  Step 03. Plug the AC power adapter / (leave the battery for now)

  Step 04. Press the power button and check if the unit is operating normally

  If the steps listed above is not enough, then you can try reinstalling the hard disk on your laptop

  If the problem persists again please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and provide recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support)

  Note: Back up all personal data on an external drive if possible. Otherwise, you can connect the faulty HDD through SATA USB adapter with another PC or a PC even after replacing the drive HARD and reinstall the operating system and try to copy / retrieve files. You can also check out the link below for additional help

  http://www.WikiHow.com/recover-data-from-the-hard-drive-of-a-dead-laptop

  Please click on the link in order to identify, prevent, diagnose, and recover failures Drive on HP Portable Hard Drives & Solid State Drives:

  http://h10032.www1.HP.com/CTG/manual/c02876562.PDF

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• Pavilion 2206TX: hard drive DST short test failed

  Hard drive DST short test failed.

  For a few days, my laptop is not starting.

  Run the diagnostics showed "hard drive DST short test failed.

  I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

  I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

  Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

  Help, please.

  Hello
  
  Yes, you can use your friend recovery media in your. It should work.
  
  I'm not able to find a recovery media for your model of third-party vendors too.
  
  No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.
  
  Concerning
  
  Visruth

• Satellite L750 - receive messages from ordinary this HARD drive is about to fail

  I have a laptop of PSK2YA - 04K 010 L750 Satellite.
  I get regular messages that my hard drive is about to fail.
  I backed up all my important stuff.
  I did not the recovery discs until I started getting these messages.
  I've been able to create a windows repair disc & also recorded an image of the hard drive on an external hard drive with no problem.

  I bought and installed a Western Digital 750Go WD7500BPKT hard drive replacement.
  I tried to do a system restore using the image I created on my external hard drive
  "I get the following message appears a few seconds after the start of the reimage" the operation failed because of a device error encountered with the source or the destination. (0x8078012D)

  I reassembled the original hard drive & make a set 4 DVD discs using the Toshiba Recovery shortcut.
  I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.
  Don't really know where to go now & am hoping to get a few ideas from people in the know or have been here before.

  HHHHeelp please

  > I tried to do a system recovery using the image I created on my external hard drive

  How did you create this image?

  > I put the Western Digital drive HARD back in & run these discs. Disk1 ran right to the end, then put in disk2 wouldn't do anything, the drawer of the DVD would keep opening asking me to put in the disk.

  It looks like the 2nd disc can be read correctly or the 2nd disc was not created correctly.

  I first recommend you to clean the lens of the laser of the reader of CD/DVD alcohol or cotton tip.
  Then try to run the installation by using the recovery disk once more.
  In case this isn't possible, your recovery disk is defective.

  If the recovery disk that is faulty, you have an option to order here:
  http://backupmedia.Toshiba.EU/landing.aspx

  The 2nd option would be clean Microsoft Windows disk usage.
  Missing drivers may be downloaded from the Toshiba UE driver page.

• try to install windows in a new driver and gave me the error code 0 x 80070017

  Original title: install windows in a new driver

  try to install windows in a new driver and gave me an error code 0 x 80070017 Windows vista the hd is brand new, what I am doing wrong

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

  How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

  I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

  Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• A service of driver for this device has been disabled. Another driver can provide this functionality. Code 32 (hard drive problem)

  Hello

  I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

  Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!

  Try the following MS KB article:

  http://support.Microsoft.com/kb/314060

  Try following the steps for Windows Vista, which should also work for Windows 7.

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  Hi JimmyGoings,
   
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
   
  In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
   
  You can follow the steps in the article given below to resolve the problem.
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
   
  Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
  In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
   
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• /Library/printers/HP/cups/Inkjet8.driver/Contents/MacOS/Inkjet8 failed

  Hi, I am unable to print from my MacBook Pro on my HP b110c all-in-one. It's the exact error message trying to print:

  /Library/printers/HP/cups/Inkjet8.driver/Contents/MacOS/Inkjet8 failed

  I found info on 'wash' of the software, and then reinstall Mac OS Snow Leopard and higher, but I'm under Leopard (1.5.8). Is there a protocol to follow to solve this problem for my OS? The only way I found to print correctly is immediately after the restart of the entire computer. Obviously, I can't do it every time I want to print.

  I can print a printer status report, there is no problem getting that. The problem is trying to print from my hard drive (Word doc, PDF, etc.).

  Thanks for your help

  Hi msrOPAL,

  So if uninstall does not work, try the cleaning brush as well. When you click the button uninstall, press the keys 'Ctrl', 'ALT' and 'CMD' - this should allow the cleaning brush. If this also fails, you can manually delete the following folders and files:

  -Go to Mac HD/Applications and delete the Hewlett-Packard folder

  -Go to the Mac HD/Library/Application Support and removes all of the HP files

  -Go to Mac HD/Library/Caches and delete all the files in com.hp

  -Go to Mac HD/Library/Preferences and delete all files com.hp and HP or Hewlett-Packard files

  -Go to Mac HD/library/printers and delete hp folder

  -Go to Mac HD/library/receipts and remove any package of HP

  -Go to Mac HD/Library/Startupitems and remove any file from HP

  -Then, go to the users/library folder and delete all the files and folders associated with HP in the Printers folder and preferences.

  Restart the Mac and then empty the trash.

• Driver for Maxtor One Touch III

  I use a desktop computer IQ528d HP touchsmart running on a 64-bit processor. I tried to get my Maxtor One Touch III work but my computer couldn't detect it. Message is cannot find the driver. I went into pilot Web site Maxtor and download OTC_EMC_Vista_Update [1], but my computer still couldn't work. Is the problem due to the fact that the driver will not work on a 32-bit computer? Otherwise, that's the right driver to use? Where to find it?

  Hi roger low,.

  Please use the Forum for answers.

  I have studied the issue and found that Maxtor One Touch III is perhaps not compatible with the 64-bit version of Vista.
  If you have contacted the OEM, and they can provide you with a driver, it may not work.

  Let us know how it works. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.