/Library/printers/HP/cups/Inkjet8.driver/Contents/MacOS/Inkjet8 failed

Similar Questions

• I get the message on the printer: error: failed to /Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

  I'm able to print a test page but nothing else. Other computers can connect to this same printer (HP Photosmart 8400 series) and have no problems printing. I use this same printer for almost two years on this laptop (MacBook Pro) and have never had any problems. Nothing has changed except that my roommate got a new MacBook and began to connect to the printer (we don't do wireless printing). Any ideas?

  What version of Mac OS X?  If 10.6 or higher, download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

• Repair disk indicates: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.

  My computer is slow, so I did a repair disk with disk utility. It shows the following message: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.

  This is what significantt and what I need to do.

  In addition, anyone recommend a good antivirus, malware application; or is the system Mac enough? Wharton could I do for optimization?

  1. it is normal. You need not do anything.

  2. unless you use Windows on the computer or often to share files with computers running Windows, it just Synchronize Mac OS X and use your common sense.

  (138148)

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Can I back up my library on an external hard drive?

  I want to save my photos by putting a copy of the Photo library on an external hard drive. I can do this and if so, how?

  Yes. Drag-copy a volume to the Mac OS Extended format.

  (141657)

• Use as system photo library will not work on library migrated on external hard drive

  I've migrated my library of photos on an external drive to free up space.  I run pictures while pressing the option key.  Photos don't 'sees' the library on the external hard drive in order to "Choose library" is grayed out.  I select "Library" and it points to the photo library that has been copied to the external drive.  It opens and I see all my photos.  I then go to preferences and select "use as a library system.  Which turns gray.   I then released photos.  When I have photos of tenant he still does not recognize that I have chosen an external library such as my library system, and I have to repeat the whole process again to nothing does not.    My external drives are Seagate 4 TB comes pre-formatted under OS X log (Extended).  The photo album has been updated from iPhoto and now I also copy the album iPhoto on the same external drive in the case which has data that allows pictures to designate my photo album of external drive as my photo album of system.  However, I'd rather remove it because it takes up to 500 GB of hard disk space too.   I searched on the internet and other forums without success - seems to work just for everyone.  Help, please!

  This is the format that you see when you download info on the disc?

  pre-formatted under OS X log (Extended).

  I have not seen that - the correct format is as Mac OS extended (journaled)

  Please check that your is actually

  LN

• ITunes Library copy on external hard drive

  So I just copied my iTunes library on an external hard drive and now when I try to play a song in iTunes, I get a message saying that the file is not found. I see the files on my C drive, where they were stored at the origin. What is going on?

  What exactly did you go where? See make a library of portable split. Maybe you can put the parts back together in the correct form on the external hard drive and then shift-Start iTunes to open the library there.

  TT2

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• Reassign the library on the external hard drive hard drive

  I have my iTunes library on an external hard drive. Whenever I have add files to iTunes with the hard drive is connected, it automatically adds them to the library on the hard drive.  When I add files to iTunes unless it's plugged, it adds to a library on my computer.  I bought a new computer that has enough hard drive space for me to get all on my hard drive.  I need to just 'choose' library on my computer via the startup key option choose the method of the library and drag all the files on since the hard drive in my iTunes music folder? Wanted to ask you before you give it whirl and somehow spoil inadvertently (happened!)

  You drag the largest of the two libraries on the hard disk, choose that one and then drag media files either to the application window open iTunes or automatically add to iTunes folder.

  (137744)

• Cannot read iphoto library stored in an external drive, after the installation of el capitan and photos

  I can't read iphoto library stored in an external drive, after the installation of el capitan and photos, can anyone help?

  What size is the drive? How are you connected to it?

• How to print a list of the names of the video in the library in an external hard drive?

  Original title: I have an Acer laptop and an external hard drive with stored videos. How to print a list of the names of the video in the library?

  The one you suggest how to print a list of the video library on an external hard drive please?

  Hi lekitschmoderne,

  1. what type of video list you have? It is a type of list of movies?

  You can try to connect the external drive to the computer and access the list of video. Right-click on it and select print.

  For more information, you can consult the following article:

  Print a document or file

  Hope this information is useful.

• Cannot print: Error Message on F4480-(OS 10.6.8) library/printers/HP

  Pilot plant, put in the new ink.  Unplugged, turned off the computer and the printer, restarted... always get the message:

  "" Error: / Library/Printers/hp ".

  Went into settings, printer / fax & checked - printer is listed as default value.  Went to utilities, watched the libraries.  I didn't know what I was looking for.

  Also yesterday tried to download the update from Apple.  Computer screen went to default before the blue & stayed there... twice. Hmm.  Old Bessie dies and a new printer, it's too much for her?

  Thanks for your question.

  I indicated that I was using 10.6.8 - Snow Leopard-.  I finally found the original CD, loaded the old software and voila, everything works fine now.

• WMP 11 crashes when you add media to the library from an external HARD drive

  WMP 11 problem!

  I have win XP and current run WMP 11, I try to add data to my library on an external HARD drive, the player begins to add and then crashes... I tried rebulding, clear memory cache and re - install the software... I also tried the HARD drive on another machine, and it worked fine... solutions?

  Hello

  ·         There the latest changes on the computer before the show?

  ·         Have you tried to connect the drive to a different USB port and check?

  Method 1:

  I suggest you try to install the hotfix from the link given and check if it helps:

  FIX: Windows Media Player 11 may stop responding when you transfer media to a device that uses the Media Transfer Protocol and then you cancel the transfer process

  http://support.Microsoft.com/kb/935552

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos?

  I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos, so I can link to the catalog?

  The original drive I had was called E:... THAT IS, FILE NAMES ARE!

  If you would like to recommend that I go to each of these lines and redirect each of these folders, right?

  Yes, reconnect the top-level folder on drive E:, as shown in Figure 4 here: Adobe Lightroom - find folders and files moved or missing