Y50 HUNGS ON THE BIOS SETUP

Similar Questions

• G460 Struck (HUNG) in the BIOS

  Hi all

  My G460 does not start, its BIOS hung...

  -> What laptop starts his guillotine f2 to BIOS & F12 Boot Menu order.

  -> Not even able to enter the menu of the BIOS setup & boot order...

  -> I tried the BIOS, its entry, the recovery mode recovery option & read the USB key.

  -> I got beep sounds every bit the SEC (beep & two continuous beep)

  -> Help please.

  Product information

  SAM M471B5673FH0-CF8 DDR3 1066 2GBRAM

  ARD 2.53 G 3 m I5 - 460M CPU Intel VGA K0

  What OS you have installed? I'm pretty sure that you have installed something... Remove the disc, connect it to a desktop PC and define the first partition as active.

  It is not a BIOS problem, so far stay the recovery mode.

• How to enter the BIOS setup firmly

  8.1 - Whenstarting Windows that I'm trying to access the BIOS Setup. I push F2 repeatedlyeven after seizure-Toshiba screen is displayed. Almost always, I get on Windows system, only very few times I get to a tenth of a second at the left bottom of the screen saying line something like "to enter the BIOS. But then it is already too late to grab something. Is there a howto method course enter the savelie BIOS Setup? I have a Toshiba-computer laptop-P500-PSPGSE.
  Thank you very much in advance youvery.
  hansm

  F12 after start-up for multiboot-selection-Menu does not work either.

• How to activate quickly publish in the BIOS Setup?

  Hello world

  does anyone know how to enable quick post in the BIOS Setup? This option seems not to be there in Configuration or maybe I'll only not on this issue the right way. Any help would be appreciated.

  See you soon
  AJMAL

  Quick post option does not exist and there is nothing to do. What you can try is to use a few hardware diagnostic tools.

• Satellite L750 - 1 DM-how to enter the BIOS setup?

  Hi all.

  Tried several combinations of buttons - such as "DEL" or F' or F12 and so forth--but nowhere I could access the BIOS Setup.

  Does anyone have any useful information?

  Best regards.
  Robbs

  F2 allows to access the BIOS
  Press F2 quickly several times in line once the laptop has been powered.

• Satellite 1400-103: cannot access the BIOS Setup

  I have problems to enter the BIOS setup. At the start screen 1, I press ESC, and then check the system appears. Then press the F1 key. Once on the button, it takes me to the BIOS Setup and reboot the laptop. Any help will be much appreciated.

  James

  The laptop starts properly? I want to say is possible to get into the Windows operating system?

• How to enter the Bios Setup Satellite 4030?

  I am looking for information how to enter the Bios Setup.

  To enter the BIOS settings, use the ESC button.

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup

  After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key).  I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7.  Any ideas?

  Well you're response made me experiment more and I discovered that the ESC key works if I type repeatedly instead pressed constantly.  Thank you for taking the time to answer!

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN VISTA: After installing new drivers through the utility Dell to keep the PC to date, DVD not working anymore (and not located in the bios Setup)

  When starting, it not recognizing my DVD drive more.  I went into the bios setup and it does not appear in there.   I have to re - install the bios?  or ....???

  Hello

  If the drive does not appear in the BIOS, there is a hardware problem - either with the player, wiring,
  or the motherboard interface circuits.

  Check with a real computer store (the one that makes its own internal circuits and not of leeks and poster
  a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• M6-1035dx of the bios Setup

  M6-1035dx of the bios Setup

  very frustrating to NOT be able to configure your machine to work as you want. the configuration of the bios is limited, you can only configure the boot order basically... I ask you please, tell me how to access all of the configuration of the bios.

  Thank you very much.

  curtm

  Hello @curtm,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you look to set up your BIOS in a certain way, and I'd be happy to offer my help!

  Unfortunately, the BIOS is configured so that firmware can be largely personal. Set apart to access the different categories in the main menu of the BIOS, there are no other options to change the nature of the BIOS on your computer.

  I hope this helps!

  Best regards

• Equium A300D-13 x - cannot access the BIOS Setup

  Hi, thanks for the research.

  The hard drive on the laptop went faulty then replaced it with a new one... but when turn and select F2 to check the bios or F12 to change the order of boot on cdrom. I get the message "entering setup... If please wait"but nothing happens.

  Tried without any hard drive but the same result. Any ideas anyone?
  See you soon

  He works before upgrading the HARD drive?
  Remove the HARD drive and try again?

• C50-A-180 satellite how do I enter the BIOS Setup?

  Hi guys,.

  I have no idea how I can get into the Setup of BIOS of Satellite C50-A-180.
  I've tried some of the F1, F2, ESC, but I can't make it work. Maybe I do something wrong, too.

  I want to delet Win 8 and install Win 7, I need the bootorder for this purpose.

  I hope any of you have a clear description how enter the BIOS of this model.

  Hello

  Before you anything please create recovery media (DVD or USB drive). After the new operating system installed, you will not be able to install the original image of the HARD drive recovery. Don t forget it is very important.

  So, after you do this proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Recommencer start laptop, then press F12 to get into the boot menu. There you can choose the first boot device.

  One last thing. Before you begin with Win7 installation check if your laptop is supported and Toshiba offers all the drivers, tools and utilities.

• Portege Z30 - cannot access the bios Setup

  Hello

  I can't enter BIOS setup when starting. Pressing on F2 allows me to enter the master password and HDD/SDD (confirmed validation), but the screen freezes at the "Toshiba configuration utility' graphics without any progress.

  This problem began to appear quite suddenly, I enter the setup of BIOS several times before without any problem. The only change that's happened that I know is an event of disruption/recovery failed.

  My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that? Is it possible to force it to boot normal start time? I'm using Linux, so I can't use the Windows of Toshiba Utilities.

  > I'm using Linux, so I can't use the Windows of Toshiba Utilities.
  That s bad:(dans le Toshiba HW Setup vous trouveriez un paramètre pour modifier l'option vitesse de démarrage.)

  > My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that?
  Hmm in my opinion, if the start-up speed would be set to fast, you wouldn't be able to press F2 and enter the BIOS password.

  However, in other cases, if the startup mode is set to fast, you can enter the first INS key BIOS and press the F2 key

  Give it a try.