Yet an another microSD Question (it's different!)

Similar Questions

• Yet another silly question

  So, quickly followed by the post, I did earlier this week:

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/what-am-I-missing-overheating-fans-tpfan...

  Yesterday, I disassembled the T60 - B, cleaned the fan, memory up to 2 GB in an accident and swapped the screen with the T60 - C flexview. And replaced broken front with another Panel before broken, but this one doesn't gouge in my thumb.

  Anyway, everything is going very well, no remaining parts and screws and it now works better (and cold) than ever.

  Question is, is there a different display driver should I br running in order to take full advantage of this upgrade of the screen? Maybe I missed something, but I don't see anything on the list of drivers that jumps out to me...

  Once again, thank you!

  I think you are missing the point. The T60 has optional motherboards and option screens. Each dimension of plate came in four different styles at least. Card Intel graphics, two with ATI Radaen and two with ATI fireGL. I guess you have a 15 "model and updated since a XGA (1024 x 768) screen to a screen flexview SXGA + or UXGA. Change the screen will not involve the change of pilots, but the flexview screens use a different ups, if you don't change your xga may not be the power inverter to operate the screen to its full potential.

  PS it would have probably been better continue your old topic instead to make a new, or posted at least all the specs of your system in the new if we do not have to guess what you might have.

• Dell Optiplex 320 yet an another Question of Ram

  Hello

  I have an Optiplex 320 and it seems do not like this kind of ram. I tried this and several other modules I had to hang out with the exact specifications of same. My question is, what makes Hynix so special that it works with the optiplex? Is there something owner seeks the mobo?

  With the Hynix ram the machine starts fine, no problem. With the Kingston (and other brands) of PC2-5300 it don't POST and gives me the 1-3-2 beep code.

  Here's what I did to solve problems. (I've got 2 identical Optiplex 320 I did this troubleshooting)

  • Reinstall and reinstall the modules of resettlement
  • Install the latest version of the BIOS. (ending in12)
  • Delete and remove cmos
  • I tried PC2-6400
  • CUSS at it
  • Deleted graphics card
  • Attempt 1 module at a time

  Basically, what is the difference?

  Any ideas would be greatly appreciated.

  Thank you.

  Work RAM

  

  RAM does not

  

  I mentioned that I'm a huge ASUS and Corsair fan. :-)  I swear by the two.

  Corsair has a "memory Finder" page.
  See the link below.
  Corsair has done the job to see what is compatible with common systems.  Of course, they have listed Dell systems.
  That's what I used when getting memory for my 8900 XPS.

  

  Yes, the DRAM is can be a huge pain for materials developers.  "Today", most hardware designers use models tested beforehand and DRAM pre-approved and layouts.  But not all of us have this chance.  There are times when custom DRAM controllers are needed.  And someone has to do the designs which use a lot of other hardware engineers. :-)  Then, the DRAM manufacturers provide detailed hardware simulation models and precise signal integrity models.

  I'm a fan of Intel, not so much a fan of the DRAM factory.  So I look at it, it's basically like this, that the Intel chips have good tolerances.  This is the DRAM chips which vary tolerances and more.

  Also, is the "fastest" DRAM * not * always work in a system that isn't spec'd for it.  The fastest DRAM also "can carry data more quickly after the clock (one of many waiting time parameters).  So in this case, it depends if that specific DRAM contains the data a bit longer (this fine and in spec), or this memory controller specific Intel is able to work with data held not valid so that requires the Intel specification.

  Also, voltage, temperature, aging, all come into play in the electronics of the real life and tolerances.
  Then, you can see why some people say "XYZ" works in _my_ system.  But, who can * not * always be the case with each system.  It can work in 90% of the systems, and then these 10% are screwed.  So this is why * I * have different opinions on which suggests improvements.
  * I * don't want these 10%, 20%, 70%, either, to screw.

  I see the Corsair Memory recommended as work for? ~ 99.99%? of the people.  So, maybe 1 in 10,000 will be out of luck trying the upgrade?
  My _guess_ is that Dell has between a 5-sigma and sigma-6 rates of their PC and max upgrades memory failure.

  5-sigma failure rate: 0.023% (99.977 good)
  6-sigma failure rate: 0.00034% (99.99966 good)

  

• ELITEBOOK 8760W: yet an another 8760w graphics card question.

  After the years of great use of this im lappy with graphical problems, random screen flashes (sometimes it will return to normal other others it goes back like 800 x 600, or I get a message that "driver has stopped responding") it will be de-res, I get Rainbow lines, or parasites.  First, I replaced the screen, then I replaced the screen cable... no change.i reinstalled win 7 pro, drivers, ect. now my question is since the direct oem video cards are becoming difficult to find and expensive, can I install a generic over-pants m5950 and always erase the white list or should it be the HP # 647176-001 video card?

  There is not a true whitelist as in wireless cards. A standard over-pants M5950 should work.

  http://www.eBay.com/ITM/AMD-FirePro-M5950-graphics-video-card-HP-tested-working-Dell-not-tested-/181918666595?hash=item2a5b328f63:g:b3UAAOSw5VFWNO7k

  http://www.eBay.com/ITM/for-HP-8560-8760W-AMD-FirePro-HD-5950-1gb-GDDR5-video-MXM-3-0-card-216-0810001-/321760704383?hash=item4aea6eb77f:gvEAAOSwDNdVrOj4

  http://www.eBay.com/ITM/HP-AMD-ATI-FirePro-M5950-1gb-GDDR5-EliteBook-8560w-8760w-VideoCard-109-C29841-00-/231712512746?hash=item35f3245aea:g:TVEAAOSwDFNWE

  Most of those you see on the market have been drawn from HPs anyway.

• Yet an another XH A1 w / CS3 Question...

  I looked through the forum and have not found anything that is exactly the same problem, I'll have to capture HDV 1080i (60i) of my XH A1 in PP CS3...

  I am running CS3 on a Dell XPS M1330 with an Intel Core 2 Duo, 4 GB Ram and Vista OS.  Like everyone else, I can't capture HDV footage - get capture to control the camera, even bring up the ofline screen I'm supposed to see while he cpatures, but in the end, it captures without frames.  However, I have peut capture HDV 1080i (60i) mode camera, but is not a HDV tape.

  Can someone please help?

  1. Unplug the XHa1 firewire cable
  2. The value XHA1 VCR/playback
  3. Press the Menu button
  4. Select "Signal Configuration.
  5. Replace the reading HDV standard.  The default value is automatic and it does not work well.

  Now connect firewire, ensure that the AGENCY is set to HDV mode (mode not DV).

• Yet another newbie question...

  Hi all
  I tried to just the most basic site up and make it work for more hours than I care to admit. Make a background psd 1024 x 768, it slices upward into 16 pieces, saved jpeg for the web in my root folder, made a small banner psd, 1 slice, saved jpeg for the web, made several buttons, each of them, sliced saved gif for the web (did not have the bearings again). Summer by pouring on the tutorials from lynda.com with the book of PS7, cow site and anywhere else where I can find. Thought I'd try here and (maybe) become lucky :} maybe? Thank you.

  You are welcome. Good luck!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "juanfordroad" wrote in message
  News:glsoml$ith$1@forums. Macromedia.com...
  > I'll do. Thanks again.

• YASQ yet another YVERT Question

  Hallo,
  
  I wonder what makes V$ DATABASE. CONTROLFILE_CHANGE # increase.
  
  CONTROL points of course are, as long as the PAPER PASSES.
  
  In any case, I have observed that it changes also outside these events, in fact:
  

  select 
          scn_to_timestamp(current_scn) "Current",
          scn_to_timestamp(checkpoint_change#) "Checkpoint",    
          scn_to_timestamp(controlfile_change#) "Controlfile"
  from 
         v$database;
  
  
  Current                             Checkpoint                          Controlfile                         
  27/10/09 15:08:53,000000000         27/10/09 10:00:37,000000000         27/10/09 10:05:40,000000000      

  but the last command of newspaper was at 10/27/09 10:00:37, 000000000, actually
  

  select SEQUENCE#,STATUS,FIRST_CHANGE#,FIRST_TIME from v$log order by first_time desc;
  
  
  SEQUENCE#                              STATUS           FIRST_CHANGE#                          FIRST_TIME        
  728                                    CURRENT          24488675                               27/10/09 10.00.37 
  727                                    INACTIVE         24459899                               26/10/09 22.23.59 
  726                                    INACTIVE         24393696                               26/10/09 14.05.01 

  It's about Oracle 10.2.0.4.
  
  Thank you

  ottocolori wrote:
  Thank you very much friends!

  So if you set log_checkpoints_to_alert set to TRUE, you should get the timings of checkpoints in the consistent alert with the timings of v$ database view YVERT?

  Yes, and in addition to the alert log, V$ instance_recovery view also gives many details on the various types of control points that happens. You can use it as well. Also statistics on happening and writing done by DBWR because of that control points are stored in the V$ sysstat

  SQL> select name from V$sysstat where lower(name) like '%checkpoint%';
  
  NAME
  ----------------------------------------------------------------
  physical writes non checkpoint
  DBWR checkpoint buffers written
  DBWR thread checkpoint buffers written
  DBWR tablespace checkpoint buffers written
  DBWR parallel query checkpoint buffers written
  DBWR checkpoints
  background checkpoints started
  background checkpoints completed
  
  8 rows selected.
  
  SQL>
  

  Control, the background checkpoint is the control point that happens in logfile aka control file checkpoint.

  HTH
  Aman...

• Another recursive question

  Hello
  
  I'm doing a program that generates the n-bit Gray code. Binary thinking, also known as the Gray code, is a binary numeral system where two successive values differ in only one bit.
  
  Another explanation would be - a bit grey n code is a list of 2 ^ n different n-bit binary numbers such that each entry in the list differs just slightly from its predecessor.
  
  If I want to generate 1-bit gray code that would be:
  
  * 0 *
  * 1 *
  
  2 - bits would be:
  
  * 0 0 *.
  * 1 0 *.
  * 1 1 *.
  * 1 0 *.
  
  
  3 - bits would be:
  
  * 0 0 0 *.
  * 0 0 1 *.
  * 0 1 1 *.
  * 0 1 0 *.
  * 1 1 0 *.
  * 1 1 1 *.
  * 1 0 1 *.
  * 1 0 0 *.
  
  and so on.
  
  
  That's what I have so far:
  

  public class GrayCode {
  
       static void genGC(int n){
            
            if(n == 0){
                 System.out.println(n);
            }
            else{
                 genGC(n-1);
                 
                 genGC(n-1);
            }
            
       }
       
       public static void main(String[] args) {
            
            int a = 1;
            
            genGC(a);
  
       }
  
  }

  Thus, in the case 1-bit gray code the program above would be output:
  
  * 0 *
  * 0 *
  
  for the 2 - bit code:
  
  * 0 *
  * 0 *
  * 0 *
  * 0 *
  
  etc.
  
  Any ideas or advice what to do to go further are greatly appreciated.
  Thanks in advance.

  blias says:
  Edit: Actually not sure on the baseline scenario. Thus, when n == 0, we create a String [empty].

  What he has is suppoesd be: we create a String [] containing a single element, and this element is an empty string, "". However, for me, your comments sound 'empty String []' love new string [0], a String [] without items.

  So for n = 0, the list of channels is an element, «» Logic says that for g (1) we take that a single empty element for g (0), copy it and reverse the trend. So now we have "" and "" as the two pieces, which is the inverse of the other. And then add us "0" to the first "" and the prefix "1" to the second "", giving us '0', '1 '. And so on...

  (2) I leave you to think about why the numbers 1, 2 and 5 above call methods that return values, while 3 and 4 use all the return values. If you get stuck, however, I'll explain it.

  Sometimes I get confused whether to create a method that returns something or to have Sub. When I work on other problems, sometimes I'm in doubt - why do I need a method that returns the value or else vs vacuum and vice versa. I think more practical, the understanding of this would eventually come.

  In this particular case, 1, 2 and 5 are creating new objects, so call us a method that creates the object and returns. For 3 and 4, we take just existing bays and edit their content. Nothing magical here. Just going by what says the abstract steps.

  As I said earlier - for me it is more difficult to break down the problem to the smaller, small problems to break the smaller yet more and so on until I get simple steps rather than coding real itself.
  Do you know if there is no method to this approach to the failure or is it just common sense?

  I can't give you a magic formula. For me, it's just a matter of logic, common sense and experience. Most likely (mumble) years of experience let me forget a lot of the details of the trip.

  jverd, you're the greatest teacher I've ever had. Seriously.
  I do thank you again for your time and for all. :)

  Meh, I have good days and bad as someone else. Glad to be useful! And thanks for the compliment!

  Edited by: jverd March 30, 2011 12:41 AM

• BlackBerry smartphones another little question from a novice on windows authentication

  Hi, I posted a question a few weeks ago, to summarize, I recently dumped my treo for the new storm.  I enjoy them until now, but I have a question to get connected to a windows site.

  I use logmein for mobile access, (www.logmein.com), it's like gotomypc, but free and I used to be able to log in with my treo smartphone, but I'm having a problem on my BB.  I spend all the stuff (on the site of logmein) html Web page and get to the point where I have to put the password for the computer that I'm remote'ing.  The phone's browser has "Windows authentication" in the upper part, followed by three text fields, username, PW and domain.  I don't have a domain, but when I entered the username and password, I can't select the "login" link just in the middle of the page at the bottom. "

  I tried everything, he can't know.  Also, on this screen, zoom and other "typical" controls are not available, as the keyboard and a few other navigation options (none is "next" or "enter")...  Oh, and another thing, when I click on the screen where the "login" link is, it locks the keyboard back to the top and sometimes wipes all the text on the fields?...

  Thanks in advance...

  Thanks for the help, it turns out looking as if it was a problem on the side of the House Logmein.com...

• Yet an another installation tips - new generation I7 - 5930K

  Hi all

  I am building a new platform for publishing and I need some advice, I'll be happy if someone can look over it and check I don't miss anything.

  View profile

  • Software used
    • Adobe first CC
    • Media Encoder - export to dvd + h264
    • Yet Media - creation of menus
    • AE will be used in the future
  • The 40-minute film editing, loaded with effects (both 1st and 3rd part as the red giant)
  • Images:
    • Currently - various sequences of different cameras I've worked with several photographers video.
    • It is mainly DSLR and GOPRO, and the size is about 100-200 GB per movie.
    • Future proofing - Assembly of the 4 k images

  Pending issues

  • Is it balanced?
  • will it be sufficient for 4 k?
  • Should I buy an additional graphics card?
  • I don't know a lot about the coolers, I appreciate your help with this.
    • At the moment I just took the noctua to the only CPU - I don't know yet, it fits the case
    • What extra cooling?
  • I reuse disks hard 'old', don't you think it's ok? or is not a good place to save. I don't want to create a neck of the bottle after this purchase.
    • OS / software - SAMSUNG 850 PRO 128 GB
    • Work - Raid drive of 2 * Western Digital Caviar Black 1 TB
    • Offline files / backup - 2 * Western Digital Caviar Green 2 TB
    • Scratch disk is the new listed 950 down

  Build

  Processor: Intel Core i7 - 5930 K 3.5 GHz 6 - Core Processor

  CPU cooler: Noctua NH - D15 CFM 82.5 CPU Cooler

  Motherboard: Asus X 99 - DELUXE/U3.1 ATX LGA2011-3 motherboard

  Memory: G.Skill Ripjaws V Series 32 GB (2 x 16GB) DDR4-3000 memory

  Storage: Samsung 950 PRO 512 GB solid state drive m2-2280

  Video card: EVGA GeForce GTX 980 Ti 6 GB Superclocked + ACX 2.0 + video card

  : Nineteen hundred red Full Tower ATX Antec case

  Power supply: Antec 1300W 80 + Platinum Certified fully modular ATX power supply

  The budget was stretched to build this platform, so please, be gentle with your recommendations

  Any help will be MUCH appreciated.

  Edit:

  Should I get off at 5820 & 99 x - a MOBO and add a 2nd SSD for the media?

  Kind regards

  Mehdi.

  I saw the 5820 k markers once overclocked, similar to the k 5930 scene. so for me the upgrade to the k 5930 is only for the pcie lanes. If you're looking for more quickly, 5960 x 8 cores is the next step toward the top, but more than 2 x the price. If you need that performance, I will try to use the as a temporary remnant 5820 k, just to get to broadwell-e 10-core. It is rumored to 2016 q2 release.

  It will cover 4 k edition?  Read this recent post:

  Re: First generation PC - GoPro 4 K video editing with Premiere Pro and AE - Opinions

  One word: glorious! 4K video editing is out of this world. In the source monitor and program videos are played with a 'complete' resolution with zero loss of images. Classification and color of the color correction is amazing also. I can manipulate each parameter and see it change during video playback. The rendering is seconds fast, light for a 2 min clip. The encoding is super fast.

  What to update then?  We can only try to recommend a balanced build based on your projects and media. If you do not have the system and launched, you would be able to see where the bottleneck using performance monitoring programs. first and most of the software adobe for the most part depend on the cpu. Since you have the gtx 980 ti and samsung 950, the next update would probably be the cpu. If the 5820 k is not enough, the next upgrade of processor will the kernel broadwell-e 8-database $600-ish or 10 at the $1 k - ish. the only faster cpu upgrade option for the asus x 99 mbd would be a xeon, but which would be very costly and require an ecc memory. After broadwell-e/ep next gen cpu will require a new motherboard.

• Another RAID Question :)

  Until recently, we bought our licenses for ESXi 5 and before I have order my raid controller I would check with the community on certain things.

  Based on research I did on the forums and on the compatibility list, it's a pretty decent controller:

  http://www.Newegg.com/product/product.aspx?item=N82E16816118170

  What we seek to do is to take the above 8 port controller and set up 4 disks in RAID 10. Then down the line, connect a 4 discs additional for the controller even in another configuration of raid 10 or two matrices RAID 1.

  So my question is this: is it possible to install ESXi 5.5 on the first RAID 10 configuration, then later, to create additional tables on the same controller and then assign them to the existing installation of ESXi?

  Thanks in advance for answers!

  Yes, you can add new bays starting from the same controller to your ESXi installation at a later date. This will be done through host Configuration > storage. Once the berries are configured, they will appear in the list of available LUNS and can be connected to ESXi like additional data stores.

  I don't have experience with this particular model of LSI first hand, but it is listed on the HCL 5.x ESXi, so you should not encounter compatibility problems.

• Another interesting question of synchronisation in 3.3.0.747

  I have a table of table that has been designed from a database schema. The table has now been moved to a different database in another schema and changed.

  3.3, I am able to re-point of the synchronization model with the data dictionary for the new database connection, but the result is the wizard says the table isn't in the new database and therefore should be removed from the model.

  I executed the script of meta-data table clear that Philip wrote earlier, but get the same result.

  How can I get is the tool to recognize the table in the new database, but the model needs to be updated?

  Hello Kent,

  You can change the schema in the model and use synchronization utility or can use wizard 'import of data dictionary.

  Philippe

• Yet CS4 Export as Question Flash on the display full screen

  I produce 16 video segments in first.  I now need to combine in a video that runs continuously and plan to use Encore CS4 to do this.  In the Build section, there is a selection of Flash.  In addition to the DVD (which I will do in yet) I want as the Flash version.

  I think it might be easy for the customer to browse all the associated files made by again and put them on any computer, open it and let the video game on the computer (with a large attached screen).  Much like you would in a kiosk environment.

  My question is - I did a quick refresher test and things seem to work except when you play the video, it doesn't seem to be a mode switch full-screen.  I thought it would be, but there isn't.  Is there a way to activate the mode full screen?

  Thank you.

  The flash can be fussy playing "locally". If some security settings may be required on the PC play back.

  There are limits to the Flash yet. These have changed between version CS4 upward through CS6.

  Customize the player controls have become much more flexible with, I think, CS5, but maybe 5.1 or CS6.

• Is anyone of another widget issues knows between different browsers?

  I just launched my first website built in Muse and, although he looks perfect in Safari (5.0.6), my client knows some very sensitive gliches in Firefox and Explorer (haven't tried Chrome, yet). The issues seem to be with the "menu bar" as well as «Accordion» widgets If a staff member is available and able to help, I would really appreciate it.

  The site is www.chinapluscapital.com. And I've included some screenshots of comparison which took my client. It uses all these browsers updates. I tested on my own version of Firefox (3.5.19) and the only issue I see is a familiar character in the body copy in the places where I inserted soft returns (including screenshot).

  So the questions can be explained by the computer of my client to a certain extent, but regardless, the ideal would be to show the browser and without version problem.

  Someone at - it for a non-codeur to understand and possible solutions to address these issues?

  Thanks Adobe Forum!

  Steve

  Problem of Widget menu:

  

  Question of accordion Widget:

  

  Your client has JavaScript active? It took for the correct display of the sites of Muse (in any browser), as well as many other sites on the web (including the many experiences of audit of eCommerce site).

  If JavaScript is enabled, and the screen is still incorrect, we really need to know exactly which browser versions are used in order to be able to reproduce the problem.

  FWIW, I see no problem view and interact with your site in IE8, IE9, 16.0.2, 6.0.1 Safari or Chrome 22.0.1229.94 Firefox. (Firefox 3.5.19 came out early 2011 and is the latest version of Firefox 3.5) The current version of Firefox is 16.0.2).

• Another quick question of CSS layout - vertical align: middle

  Just another quick on the use of CSS to the content of the page within the section of the page layout.

  On the homepage below, I have some images with text next to them:

  http://www.Haiji.jp/

  Because of the uneven text, it would be better if the text on the right and left of the four images vertically flown in space.

  (Basically like this old version of the table according to: http://www.haiji.jp/indexcopy.php )

  I don't know vertical-align: middle; doesn't really work for this, but could not get the right way to work.

  I tried variations to have an external container positioned a parent and an absolutely positioned inner container and using top: 50%;

  So for the first row for example CSS is:

  #outerWrapper #contentWrapper #content #row_one {}

  Width: 620px;

  overflow: hidden;

  }

  #outerWrapper #contentWrapper #content #row_one #row_one_left {}

  Width: 210px;

  padding: 0px;

  float: left;

  margin: 0 0 0 0; / * Sets the properties of margin for an element using the shorthand notation (up, right, down, left) * /.

  }

  #outerWrapper #contentWrapper #content #row_one #row_one_right {}

  Width: 410px;

  padding: 0px;

  float: right;

  text-align: left;

  margin: 0 0 0 0; / * Sets the properties of margin for an element using the shorthand notation (up, right, down, left) * /.

  position: relative;

  }

  #outerWrapper #contentWrapper #content #row_one #row_one_right #row_one_right_content {}

  position: absolute;

  top: 50%;

  }

  Who is not doing and maybe overloading the question.

  But if anyone can let me know how to get this vertically positioned text which would be a good thing.

  Thanks again.

  Support IE7 you need to "hack" a little: adjust the "padding-top" according to the number of lines of text, it is a. (not a good solution as supposition is working but IE7 IS a marginal browser now)

  Then add

  the text (see below)

  http://ALT-Web.com/images/alt-Web-logo.gif"/ >

  Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor. Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor.

  http://ALT-Web.com/images/alt-Web-logo.gif"/ >

  Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor. Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor.

  http://ALT-Web.com/images/alt-Web-logo.gif"/ >

  Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor. Vestibule ipsum ipsum, ac malesuada pretium vel gravida malesuada, tortor.