YASQ yet another YVERT Question

Similar Questions

• Yet another silly question

  So, quickly followed by the post, I did earlier this week:

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/what-am-I-missing-overheating-fans-tpfan...

  Yesterday, I disassembled the T60 - B, cleaned the fan, memory up to 2 GB in an accident and swapped the screen with the T60 - C flexview. And replaced broken front with another Panel before broken, but this one doesn't gouge in my thumb.

  Anyway, everything is going very well, no remaining parts and screws and it now works better (and cold) than ever.

  Question is, is there a different display driver should I br running in order to take full advantage of this upgrade of the screen? Maybe I missed something, but I don't see anything on the list of drivers that jumps out to me...

  Once again, thank you!

  I think you are missing the point. The T60 has optional motherboards and option screens. Each dimension of plate came in four different styles at least. Card Intel graphics, two with ATI Radaen and two with ATI fireGL. I guess you have a 15 "model and updated since a XGA (1024 x 768) screen to a screen flexview SXGA + or UXGA. Change the screen will not involve the change of pilots, but the flexview screens use a different ups, if you don't change your xga may not be the power inverter to operate the screen to its full potential.

  PS it would have probably been better continue your old topic instead to make a new, or posted at least all the specs of your system in the new if we do not have to guess what you might have.

• Yet another newbie question...

  Hi all
  I tried to just the most basic site up and make it work for more hours than I care to admit. Make a background psd 1024 x 768, it slices upward into 16 pieces, saved jpeg for the web in my root folder, made a small banner psd, 1 slice, saved jpeg for the web, made several buttons, each of them, sliced saved gif for the web (did not have the bearings again). Summer by pouring on the tutorials from lynda.com with the book of PS7, cow site and anywhere else where I can find. Thought I'd try here and (maybe) become lucky :} maybe? Thank you.

  You are welcome. Good luck!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "juanfordroad" wrote in message
  News:glsoml$ith$1@forums. Macromedia.com...
  > I'll do. Thanks again.

• Just got yet another call for "Windows Service Station"

  Just got yet another call for "Windows service station', saying: I was hacked and my computer sends windows warning messages and if I didn't follow his instructions all my data would be deleted... An Indian-sounding guy named Sam... I played along and got a phone number, saying: I would like to remind him he said 0808 1890111 which is a UK addiction hotline...

  I played along 'Sam' gave me an extremely long code to type in something on the windows event viewer... I know it's a scam and we have these calls often 3 times a week for a few years now. I play at the same time or am quite rude and tell them to be ashamed of themselves, depending on my mood... I really wish that they would go, but I can't this blocks 'any number' because it is off the coast.
  Any suggestions on how to remove our number and the name of their list (I asked the scammers do, but they don't notice).

  Certainly a SCAM, you have made the right choice. Never to give them information and never leave access to your PC.

  It is difficult, if not impossible to remove your number from a list of scam once its on it. And it's hard to know how they got it in the first place. It could be a list simple phone book. Recording with things like Telephone Preference Service (United Kingdom) and asking to be made "Red" (BT - UK) can make it harder for them to get a number in the first place, but once they have it probably wont help. It can stop any other do however.

  There are devices like Call Blocker, which can be programmed for their calls not ring your line, but it depends on what number they release when they call. If their number is "held" and then some providers have a service to stop calls "deductions number' to ring your line. ACR service (BT - Uk).

  PS - the links above are a few examples of our services/devices to the United Kingdom for more information.

• I have a monthly subscription to Adobe Revel. You received my payment for September 15, 2015 & October 15, 2015 according to Adobe, but Revel shows that I have only a free basic account and that it was yet another payment. What is happening on h

  I have a monthly subscription to Adobe Revel. You received my payment for September 15, 2015 & October 15, 2015 according to Adobe, but Revel shows that I have only a free basic account and that it was yet another payment. What happens here? You people need get the bugs out of your cloud services. I signed up with [email protected] that the Adobe Revel server fails to allow me to login, but accounts Adobe server connects me and says I am free on my subscription to Revel. Is happening here? I canceled once on this issue! Want to lose me again, this time for good? I'm telling you guys, I buy recently bought items 13 (of course just before you've released 14) on CD-ROM, because your cloud suck the Revel program! Sincerely, [email protected] and this is the email only I use.

  I did some research and your account indeed shows you paid AND that the subscription has expired (which is false!). We experience the Adobe Store people to examine it.

  Please accept our apologies and you are good to go now. You've been comped for the year.

  Kind regards

  Glenyse

• Yet an another microSD Question (it's different!)

  Hello, new Member here! (^^) And Yes, I use the search option. I have read the FAQ; and I look at the manual.  And my question was never answered.  I hope someone answer me soon!  Thanks in advance!

  PS: Can I suggest a topic "microSD (HC)" added to the FAQ?  It could include my questions and questions of other people as well. = D

  In any case... I have problems with my MicroSD Kingston 2 GB card. The card works fine on my computer, but it does not work in my Sansa Fuze 2 GB drive.  Not at all.  And Yes, I only put MP3 files on the card... not video.

  I noticed that many people had similar problems (but not exactly the same thing), so I was wondering:

  1) products Kingston are incompatible with the Sansa? Other people keep problems with cards Kingston, so I thought I'd ask.

  2) that I must have a microSDHC card? My card is a microSD card.

  3) the card must be formatted in FAT16 exactly?  One of your textbooks said I should use "FAT16 or higher"... but when I formatted in FAT32, it still does not work. "" The map was originally in FAT format, and it did not work in this format either.

  ... Not sure if this will help, but my computer is a Windows Vista. And he gave me 4 formatting options: NTFS, FAT, FAT32, exFAT.

  And if all else fails...
  4) what is the warranty for my Sansa product, just in case the microSD slot is broken?  I bought it in late July or early August of this year (I still have my receipt + guaranteed somewhere; it is irrelevant at the moment because I recently moved). I'm still in my warranty or not?

  It's a good idea to insert or remove a card when the player is turned off. The card slowly and gently.

  "What are the chances that my microSD card will get stuck in the drive of Fuze?

  I have heard talk of this never happens. My digital camera has a similar mechanism, but uses a full size SDHC.

• BlackBerry smartphones yet another question of Storm vs App Store

  Hi all

  I have a storm on the Vodafone UK network with the latest version of the software installed, version 4.7.

  I received the email from BB with the link to the App Store, I click on the link in the email through my BB and be taken to a page telling me that my phone is not supported.

  I think I did what I'm supposed to do here, I free memory, the right software etc.

  Any chance to get the App store on my phone or I will give just straight up?

  RyanJohnH wrote:
  Hmm, I think that this may be the problem then

  That is the question

  Good luck with all that.

• Yet another question on the planning of the CPU

  Hello!

  CPU Scheduling is one of those endless, and although I read a lot about it, I found different answers to the same question. Moreover, this is the last document on this subject and recommended... read http://www.VMware.com/files/PDF/Techpaper/VMware-vSphere-CPU-Sched-perf.PDF .

  Is it possible to run 2 virtual machines at the same time in the same logical processor? Very basic question, I'll appreciate any response and if it has links to the official documentation, even better!

  Kind regards

  elgreco81

  Ah, I think I see the confusion. There is no such thing as using a fraction of a nucleus within a single cycle. You CAN use all of a nucleus for a fraction of the total cycles over a period of time, but a physical core is busy or idle. There is no in-between, especially since we are ignoring hyperthreading in this example.

  All of a core to aid for a fraction of the total time in a given sampling period, is what gives the illusion of the use of 'part' of a core. Split in fact one heart in this way would require States and the architecture that simply do not exist in the x 86 world.

  Note that in the article by Frank Denneman he calls specifically free cycles "shopping on ' Planner. In your example, there will be always 1 free cycle at any time. There are 1000 cycles per second in your original example, and many of these cycles may be free, but there is never more than one at a time.

  To say things, otherwise, you cannot use all 1000 MHz in the first millisecond.

  The paragraph you cited in the guide to management resources assumes a Jepp 2 GHz. keep in mind that any measure of frequency REQUIRES a time interval. There is no literal split 'given time' is implied here. What they're saying is that if over a certain period of time, say a second, VM1 only consumes 500 cycles and ask no more, then VM2 is welcome to help itself to one of the unused 500 cycles initially entitled to VM1, and cycles of 1000 that VM2 was already entitled.

  I would like to know if there is still no ambiguity, or whatever it is that I does not really there.

• Yet another question "check box in a table"

  Hi everyone - I feel like this issue has been beaten to death, but I'm not super techno and it is very hard for me to decipher the many solutions that have been offered in this forum.
  
  I downloaded and installed the plugin simple checkbox. I want to use it to allow the user to select a checkbox that should be updated then a varchar2 column (1) in my table of database with a "Y" or "n" depending on whether the box is checked. In a simple form of APEX it works easily and without any problems that I can choose the plugin Simple checkbox in the dropdown list of "display as" for a given when creating the form item.
  
  In a tabular presentation there is no option to select the plugin simple checkbox for display "like." So can I assume that this is not supported and so I need to use the apex_item.checkbox function in my select statement?
  
  I tried this and I see a box on my sub form of table, but when I select the check box for a given row, and click Update I get this error:
  

  'Current version of data in database has changed since user initiated update process. current row version identifier = "9660AA52272606105296577232D033C7" application row version identifier = "AC661FC2F31800615ABE16CA014BB96F" (Row 1)'

  I looked at the example of the Dene here > http://deneskubicek.blogspot.com/2008/10/tabular-form-checkbox-for-setting.html, but I just can't believe that this a lot of code is needed to do something so simple.
  
  I have a http://apex.oracle.com sample app installation where I have reproduced my setup:

  Workspace: Leppard
  username/pw: guest/app_1000
  MyTestApp > MyTabularForm.
  The column in question is 'Checkbox' and the db column in Emp is also named chechbox.

  Any suggestion would be appreciated.
  
  Thank you
  John

  Hi John,.

  Thanks for the creation of an example, this of course made easier :-)

  The error you are getting is because your column name is different from the column name in your query.

  I changed your query to this ("CheckBox" checkbox)

  select
  "ROWID",
  "EMPNO",
  "ENAME",
  "JOB",
  "MGR",
  "HIREDATE",
  "SAL",
  "COMM",
  "DEPTNO",
  "CHECKBOX"
  from "#OWNER#"."EMP"
  

  Your box was also no definition LOV so I wrote 'Y, N' it

  It seems to work now.

• Yet another question of model

  Recently, my model started inserting his own repertoire of all the URLs in the site when I update the pages, so:
  
  href = "site/index.htm"
  
  became:
  
  href="site/templates/index.htm".
  
  The links in the site are enterred like this:
  
  href = "Stories.htm"
  
  For a page that is located in the directory of the site. The model transformed into:
  
  href = ' templates/Stories.htm'
  
  This just started happening. Before that, there was no problem. No idea why this happens and what to do about it?
  Of course, none of the work of the image or the links of the CBC.
  
  Help
  
  -Kenoli

  Thanks for your quick response. I'm helping a friend here and what threw me was that it works and then suddenly wasn't. Of course, I don't know what she could do to cause that, even if she is not conscious of having anything other than make a small change and update related files to the model. I discovered that inserting a "... / ' from each link solved the problem. Here are answers to your questions:

  > Are these pages * in * the Templates folder?

  NO.

  > Are you put these links of coding, or by searching for the target files?

  I don't know, but try the method browse inserts the "... / 'syntax in front of the link." (should have tried it immediately)

  > Can we see your template page?

  I think this is resolved, so...

  > DW did only what you tell it to do...

  Gotcha, although, as in life, sometimes we don't know exactly what we said.

  Thank you

  -Kenoli

• Yet another question of password

  It is a system running Vista Home Premium. Recently, the password has been changed and is now unknown (don't ask). But the old password is well known. Tried to use the instructions in section # 740765 but who overcharged a username and a password. Is there a way to do a restore system without login? The administrator account has never been activated. Thank you.

  You have forgotten the password.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Mick Murphy - Microsoft partner

• Yet another question: How do the update of Windows (Windows 7)

  My Dell laptop running Win7 fine until recently when the WU stop working, which seems to be a very common problem.   After many, many hours to try dozens of fixes, I gave him room and upgraded to Win10.  After discovering that Cortana (surprisingly) cannot be uninstalled and uses massive memory resources, I have reinstalled Win7 from the original dvd.    Window update still doesn't work, but I downloaded a 'stand-alone' Windows Update version and it worked.  Downloaded and installed updates 225, but subsequently of course, Win Update does still not work.   It just displays a message that updates are downloaded, but nothing else happens (several hours).   I tried Fixit kb971058, and it is also just here for hours.

  I used Windows since 3.0 and with each major release, maintainability got progressively more difficult.

  I don't know how Win Update might have gotten this done but has hundreds of discussions on the issue on the forums, etc, I think maybe that Win7 is now a lost cause and it's time to switch to Linux?

  Download KB3145739 from the Microsoft web site and install it.32 bit version: 64-bit version of https://www.microsoft.com/en-us/download/details.aspx?id=51857 : https://www.microsoft.com/en-us/download/details.aspx?id=51853

  You must include KB3153199 in this guide. There is no update of windows running performing normally without KB3153199 and a few others installed. Links and info provided here:

  http://Wu.krelay.de/en/

  KB3153199 and KB3145739 are still necessary, after installing the rollup of convenience.

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  Best regards, VZ

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).

• Yet another differential save Question...

  Hello.. I try to get incremental save working in a way that can be placed in an ACTION.

  Basically, I'm scanning a large number of small objects (more than 3000 people), and I can hold 18 of the scanner at a time. If I use the script to 'Straiten and culture' the file scanned gets gene and nicely cropped.

  I made an Action that loads the scans from a folder and runs the straiten and reframe the script, then dose a few changes to the cropped image, registers and then it closes. This 'edit/save/close' repeats until all the images are processed in the original.

  The problem is that no matter what I do save file in the batch is always the same, or askes over Scripture. What I would like is a very simple script that records a number of increment on each backup file. There are a lot of discussions on this, but the only one that I could make it work had this script in it...

  	This script will save the active document in a folder with a sufix differential
  	Change the options below to match your needs
  	var saveFolder = new file ("C:\\test");
  	var saveExt = "jpg";
  	var saveSufixStart = "_";
  	var saveSufixLength = 3;
  	jpgSaveOptions = new JPEGSaveOptions();
  	jpgSaveOptions.embedColorProfile = true;
  	jpgSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
  	jpgSaveOptions.matte = MatteType.NONE;
  	jpgSaveOptions.quality = 8;
  	End of user options
  	//==========================================
  	function zeroPad (num, number) {}
  	var tmp = num.toString ();
  	While (tmp.length < number) {tmp = '0' + tmp ;}
  	return tmp;
  	}
  	var docName = decodeURI (activeDocument.name);
  	docName = docName.match (/(.*) (-.)) [ ^\.] +)/ ) ? docName = docName.match (/(.*) (-.)) [ ^\.] +) /): docName = [docName, docName, undefined];
  	var saveName = docName [1]; name of activeDocument with output ext
  	var files = saveFolder.getFiles (saveName + "*." + saveExt) ;// get an array of files that match the prefix name doc
  	var saveNumber = files.length + 1;
  	Alert ("new file number:" + zeroPad (saveNumber, saveSufixLength));
  	var saveFile = new file (saveFolder + ' / ' + saveName + '_' + zeroPad (saveNumber, saveSufixLength) + '.' + saveExt);
  	activeDocument.saveAs (saveFile, jpgSaveOptions, true, Extension.LOWERCASE);

  It seams to work properly... but there are problems and I'm just a simple paint, scan handle type guy and no idea how to improve it...

  (1) - it records only in "c:\test". I tried to paste other paths in there... like "d:\projects\project name\scans\processed\" but it does not help.

  (2) - Straiten and Crop thin Script called from an action works. If I can do a single action to process the file. The above script works fine in action as well as the actions of edition. The problem is if I call editing / record the action of the action ' open/straiten and cultures', then the script is not error but I can't find the files, it is supposed to do (probably got 1 jpgs billion lost on my drive somewhere now)

  If anyone can help with this, I would be grateful.

  Thank you!

  I took a liberty to rewrite your code a bit. Code checks if the file "d:\projects\project name\scans\processed". If there is no - it will prompt you to select different

  Also, it will save "img_003.jpg" If this file does not exist. For example:

  img_001.jpg,

  img_002.jpg

  img_004.jpg

  saveIncrementally();
  
  function saveIncrementally() {
       try {
            var saveFolder = "d:\projects\project name\scans\processed";
            if (!Folder(saveFolder).exists) {
                 saveFolder = Folder.selectDialog("Select output folder");
            if (!saveFolder)
                 return;
       }
  
       var saveExt = 'jpg';
       var saveSufixStart = '_';
       var saveSufixLength = 3;
  
       // End of user options
       //==========================================
  
       var docName = decodeURI ( activeDocument.name );
       var dot = docName.lastIndexOf(".");
       var saveName = docName.slice(0, dot);
  
       var suffix = zeroPad(0, saveSufixLength);
       var myFile = saveFolder + "/" + saveName + "_" + suffix + ".jpg";
  
       while (File(myFile).exists) {
            var suffixInteger = parseInt(suffix, 10);
                 suffixInteger += 1;
            suffix = zeroPad(suffixInteger, 3);
            myFile = saveFolder + "/" + saveName + "_" + suffix + ".jpg";
       }
  
       saveJPEG(myFile, 8)
  
       function saveJPEG(saveFile, qty ) {
            var saveOptions = new JPEGSaveOptions();
            saveOptions.embedColorProfile = true;
            saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
            saveOptions.matte = MatteType.NONE;
            saveOptions.quality = qty;
            app.activeDocument.saveAs( File(saveFile), saveOptions, true );
       }
  
       function zeroPad ( num, digit ){
            var tmp = num.toString();
            while (tmp.length < digit) { tmp = "0" + tmp;}
            return tmp;
       }
  
       } catch(e) {
            alert(e.toString() + "\nLine: " + e.line.toString())
       }
  }
  

• Yet another question of upgrade!

  Hello

  Basically, we have two virtual Centres in bound mode 4.1.

  I'm looking to upgrade this weekend.  The main concern I have is with a permit.  I want to be able to improve the VC of the first and the hosts later (in the next few months as we put in scene in worms Dominican Republic / Dev / DMZ / Live).

  Are there problems to upgrade just the VC (especially with a permit) and then upgraded the laer hosts?

  Thank you very much

  
  S

  There is no problem with that, in fact, that's the way correct i.e. vCenter first.  vCenter 5 held the license information for ESX/ESXi 4.x guests and guests of ESXi 5.x, you need just to make sure that you add your 5 vCenter during or license keys once you have made your updates to vCenter.  Then, when you're ready, simply add ESXi license 5.x to vCenter and begin the upgrade of your hosts.

  Doug.