Yet another error "unable to download episodes of your workflow.

I hope someone pays Roger Wilmut1 a lot of money. This is my story of sobbing:

http://feeds.feedburner.com/NotForKidsOnly

Your episode albums (which is the only one, they will check) works well when you subscribe manually in iTunes, and the media file plays in a browser as it should. CastFeedValidator raises no objections to the diet or multimedia files.

The only question I cvan see is that the URL begins with https instead of http (secure connections). It was the case that the store could not handle it, and so this would cause a failure of submission. most recently, he appeared to work. But I would like to change to be on the safe side - you can't change just the URL of the feed as it will be for https, you need to change the server configuration.

Your second episode is on a different server, the Amazon this method works OK when the subscription, but I don't know how it will be with the store - however this will not affect the bidding process because they don't check it.

Have you tried to validate the food to some Podcasts Connect? -do you get any kind of error message? The process, if you are not sure about, is described here:

http://Wilmut.UK/submit

Tags: iTunes

Similar Questions

  • "Unable to download episodes of your workflow.

    I was handed a food that was installed by someone else in the past. I have most of the errors fixed (work fixed, fixed illegal characters in titles, etc.). But when I go to add the feed to the apple store in podcast, I get the error "unable to download episodes of your workflow. I searched through discussions and seemed most of the time, it was because of the invalid enclosure, but I checked and they seem fine download. Could someone take a look and provide feedback?

    http://feeds.feedburner.com/CalvaryNorthglenn

    The problem is that you have a mixture of episodes with boxes and episodes without. Your episode at the top of the page is not a forum, and it's the only one that is checked when you submit a stream. Because it is not a stream is rejected.

    It is not a good idea to mix the types of the episode in this way. The episodes that do not have fences do not appear in the store or a subscription. For now you seem to have Wordpress showing only 10 episodes in food, after which older, those are deleted (of course you can have only 10 so far). If you mix episodes and the number is limited, then very few episodes will appear in the store. You should be able to increase the number in the Wordpress settings that would work around this problem, but it is really better to have only playable episodes in a podcast feed. You can find that Wordpress has also produced a stream with only these podcast episodes, and if so you could argue that to Feedburner. Otherwise, you must remove the episode at the top of the page or your diet will not be accepted.

  • Error message "unable to download episodes of your workflow.

    Here's my workflow, and an episode of my podcast appears on this subject: http://feeds.feedburner.com/WhatHappending

    However, when I try and submit my feed to the directory of iTunes it says "unable to download episodes from your workflow."

    When I manually to the file, Subscribe to the Podcast and submit URL, my shows stream but for some reason, the episodes don't. Could someone tell me where I'm wrong here?

    Thank you!

    Within each episode in a flow, there must be an "enclosure" tag that contains the URL of the media file for the episode. Your reads:

    length of http://whathappending.blogspot.com/2016/01/Episode-2-Felicity.html"="0"type =" text/html"/ >

    This URL is for a web page: it does not work. You must provide a direct link to the media file - .mp3 or something else - and the file should play directly in a browser when you enter the URL in the address bar, not force a download. If you send a file suitable for Blogger must build the feed properly. Allowed file types are file .mp3, .m4a, .m4v, .mov or .mp4 (not Windows Media, RealMedia, Flash or any kind of built-in player).

    Your media file is hosted on SoundCloud, so you'll need know how to access the file directly. There is a setting for the download and you must disable that.

  • error iTunes cannot download episodes of your workflow.

    iTunes gives forllowing error when I try to add.

    Cannot download episodes of your workflow.

    The feed url is http://www.midmarket.org/feeds/midmarketradio/itunes

    Not sure why it can not download feeds. Can someone help me to solve it.

    Thank you.

    You have introduced a fatal error in your workflow that makes it unreadable. The first tag "description" in line 13 reads:

    < description > The Hub for Midsize Companies, sellers and Capital providers and influencers worldwide < / description >

    You can not have an ampersand ('& ') by itself in food as in XML, it means the beginning of a sequence of code. Since this is never done, it looks like RSS readers as if the rest of the food is the code. You need to replace it with either the word "and" or the code

    & amp;

    like you did in a number of other instances. I have not checked to see if there are any other loose ampersands in animal feed.

    There is another point that may well cause problems. Your enclosure tags only contain the URL of the media file. The need also to contain the 'length' and 'type' attribute, like this:

    < pregnant url = length of 'THE URL OF THE MEDIA FILE for the FULL EPISODE' = 'FILE SIZE in BYTES' type = 'for AN MP3 - audio/mpeg"/ >

    The attribute 'length' can not so important with the store, but the 'type' to recognize the file.

    In addition, your media files are hosted on Amazon and use the protocol https (secure connection). This is not recommended; If in each case, you change the https protocol to http, it should still work. There has been problems with the use of Amazon, so if you still have problems after you correct the two points above which would be the next place to look.

  • Continue to receive the error - cannot download episodes of your workflow

    Hello

    I'm using feed burner to add to create RSS feeds to add my

    ITunes podcast.

    But, when I add this feed - http://feeds.feedburner.com/wordpress/ueef

    I get the error message - unable to download episodes of your workflow.

    I want to connect Itunes to thisblog - where I'll post my future podcasts. At the moment I have a test post with a link to the

    file (which is hosted on an account of google reader with permissions to be available for anyone who wishes to

    Download or listen.

    I'm new pod casting and not really sure that I can do to solve this problem.

    Will be grateful for any assistance.

    Thanks in advance.

    There is no file at the URL you give to your Feedburner feed.

    The blog that link you has a link of RSS, but there is no media files. The episode on the blog page has a link to a media file to Google Reader, but it does not play and also the URL has no extension (for example, .mp3) so he won't have a podcast.

    Google Drive caused a lot of problems, and the indications are that he is not a suitable place to host a podcast.

    WordPress will build a podcast for you, but you must provide the URL of file media that are a direct link to the file, the extension and play in a browser, rather than forcing a download. I can't advise on the specific features of Wordpress, but they have a help page at https://en.support.wordpress.com/audio/podcasting/

    You can also find it useful to consult my page 'help you get started' on podcasting at http://wilmut.uk/pc

  • Cannot download episodes of your workflow

    Hello

    I am now looking for a day in it. So I agreed I need help to establish it.

    I though I had all ready to download my podcast on iTunes. However, I get the following messages.

    -Cannot download episodes of your workflow.

    -Podcast work must be understood from 1400 x 1400 to 3000 x 3000 pixels, JPG or PNG, in the RGB color space and hosted on a server that allows HTTP HEAD requests.

    It's I checked out the site with two validation podcasting sites and they say its all is ok...

    My power supply is - http://feeds.feedburner.com/MikesOpenJournalPodcast

    I use blogger and feed burner - mikesopenjournalpodcast.blogspot.com

    Any help would be thank you very much

    Mike

    This isn't a stream, I'm afraid of podcast. You have no tag "enclosure" containing the URLS of your multimedia files, as required by iTunes. You have a reference in the 'Description' tag (which itunes does not read) to a URL of Google Drive which is a web page with an embedded player - it won't work. You must provide a direct link to the media file, and if you enter the URL in a browser it should play directly in a browser and no download or appear in an embedded player. And you will need to find another server to host your multimedia files - Google Drive caused nothing but bad and I'm not sure that someone has managed to do work for podcasting.

    As for the image, the URL in your "tag" leads to an image that is 320 x 320 px so as you can see he doesn't qualify.

    It may be useful to read my page 'help you get started' on podcasting: http://wilmut.uk/pc - I'm afraid at the moment you have is completely unsustainable.

  • "Unable to download episodes of your flow" when you try to validate the Squarespace power

    Hi all

    We are moving our Church of Drupal 7 to 7 Squarespace site.  Today, I tried to post one of my feeds. However, the page connect Podcast throws me error of not be able to download episodes.

    I checked my xml, and 10 episodes all have valid links to .mp3 files in their enclosure tag. I even tried one of the URL of the file directly in a browser, and I can listen to the episode successfully, so I know that it is accessible.

    Here is the http://regeneration-church.squarespace.com/genesis?format=rss

    The Bank verifies that the high episode in your stream. Your high episode - as of January 1, 2025! n ' has no 'enclosure' tag than others do. As a result, the store complains that he cannot find a media file. I guess that this episode is a model? -in any case, you should remove it.

    None of your episodes have titles, so when you subscribe to iTunes media file name is displayed. It would be interesting that unravel.

  • Cannot download episodes from your stream

    Hello, I'm fighting this for many, many hours now.   I can't download my iTunes podcast because when I validate my RSS feeds, I get the error: "unable to download episodes of your workflow.

    I created 2 FLOW RSS, in two different places, and when I use power validators, they return without problems.   I don't know why iTunes won't accept it!

    The original: http://feeds.soundcloud.com/users/soundcloud:users:223621246 / sounds.rss

    Second: http://feeds.feedburner.com/MetalheadAsia

    I don't know what else to do here, I am a novice to the news FEED.

    There is a constant problem in Soundcloud and you have fallen on it, in common with a number of other posters. The URL of the media file from your top of the page of the episode is

    http://feeds.soundcloud.com/stream/261810590-Metalhead-Asia-episode-1.MP3

    This redirects to http://feeds-tmp.soundcloud.com/stream/261810590-metalhead-asia-episode-1.mp3

    When you enter the URL in a browser, others have seen an error message saying 403 Forbidden: request prohibited by administrative rules but you get nothing at all - maybe a change since yesterday. It's something that only Soundcloud can fix. Their status blog says there is a problem with the RSS, although with the audio file rather than the power supply is probably all part of the same problem.

  • Upgrading ESX host to day 4 fails with an error "Unable to download .zip bundle offline."

    I run the command update the host ESX below. It fails with an error. I used the same command to update the first host in the same cluster and that worked. Try with others and that she fails.

    esxupdate - bundle = / vmfs/volumes / < data store name > //update-from-esx4.0-4.0_update04.zip updated
    Encountered error BundleDownloadError:
    The error data are:
    URL - vmfs/volumes / < data store name > / update - from -.
    ESX4.0 - 4.0_update04.zip
    LocalFile - / var/cache/esxupdate/bundle7107600307711814965/update-from-
    ESX4.0 - 4.0_update04.zip
    Message - file remote vmfs/volumes / < name of data store > //update-from-
    There is no such thing as ESX4.0 - 4.0_update04.zip.
    Errno - 26
    Description - could not download .zip bundle in offline mode.

    Any ideas?

    Try first to install the fix for shared data and store that if an error occurs, try to install it from a local. As I recall (we work with vSphere 5 for a long time), we were unable to find the reasons why the update for ESX 4 is not installed since the shared data store, it can be at the level of patches, can be a history of the host...

  • Another impossible to download episodes of your power supply problem...

    Hi all, if I'm just starting the podcasting thing and got the W3C valid RSS but when I get to podcast connect, it gives me this error. I double checked the links and they work. Is there something I'm missing... see code below.

    < item >

    < title > NOC report Audio Podcast for Thursday, September 1, 2016 < /title >

    < link >http://stevencasco.com/audio/sept2016/CNP-Report-sept-1-2016.mp3< / link >

    < description > report: attack Online fraud rate increases 137% YOY, the report: Apple paying and Android users to spend $8 billion online by 2018, United Kingdom and Germany e-commerce continue to lead the way in Western Europe. < / description >

    < pubDate > Thu, 01 Sep 2016 10:00:00 GMT < / pubDate >

    < author >[email protected] (DJ Murphy) < / author >

    < guid >http://stevencasco.com/audio/sept2016/CNP-Report-sept-1-2016.mp3< / guid >

    Business < category > < / category >

    < / point >

    < item >

    < title > NOC report Audio Podcast for Tuesday, August 30, 2016 < /title >

    < link >http://stevencasco.com/audio/aug2016/CNP-Report-aug-16-2016.mp3< / link >

    < description > a year later, 25 percent of Samsung pay transactions are online in Korea, report: retailers could lose 20% of their customers in the event of violation, nets that can $300 million in new funding. < / description >

    < pubDate > Tuesday, August 30, 2016 10:00:00 GMT < / pubDate >

    < author >[email protected] (DJ Murphy) < / author >

    < guid >http://stevencasco.com/audio/aug2016/CNP-Report-aug-30-2016.mp3< / guid >

    Business < category > < / category >

    < / point >

    THIS WHOLE DEAL, I managed to change the item code enough to get seen to approve.

  • Yet another error of boot camp partition

    Suite by https://discussions.apple.com/message/29939812#29939812

    diskutil list results:

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

    3: disk0s3 Apple_Boot Boot OS X 134,2 MB

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: disk1s2 Apple_CoreStorage Macintosh HD 3.0 TB

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    / dev/disk2 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh HD + 2.3 TB disk2

    Logical volume on disk0s2, disk1s2

    7367C94B-8039-45FB-AA00-19B91DFFD1CD

    Fusion unencrypted drive

    cs diskutil list results:

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group 7E9C5A3F-075A-4320-AA32-E11EDE5310D3

    =========================================================

    Name: Macintosh HD

    Status: online

    Dimensions: 3120722075648 B (3.1 TB)

    Free space: 833570848768 B (833,6 GB)

    |

    +-Physical volume 4CB84961-E23C-452C-95F9-FBC73F017E26

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120988852224 B (121.0 GB)

    |

    +-Physical volume A75E22CF-CC20-42A2-97B2-FBF40CC07BD3

    |   ----------------------------------------------------

    |   Index: 1

    |   Disc: disk1s2

    |   Status: online

    |   Dimensions: 2999733223424 B (3.0 to)

    |

    +--> Logical volume family A41A1523-BC49-4FF3-9001-BD20A85D8050

    ----------------------------------------------------------

    Encryption type: no

    |

    +--> Logical volume 7367C94B-8039-45FB-AA00-19B91DFFD1CD

    ---------------------------------------------------

    Disc: disk2

    Status: online

    Size (Total): 2281295970304 B (2.3 TB)

    Reversible: no

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    LVG Type: Fusion, sparse

    The volume of your CS shrank by GB 833, but there is no Bootcamp partition. What version of Windows you are trying to install? The Fusion 3 TB drive requires special partitioning. El Capitan can not do this. The partition of the BC should be on the first 2 TB HARD drive or more than 1 TB due to limitations in versions MBR/BIOS of Windows (W7).

  • iTunes says that it cannot download episodes of my RSS

    I get the error message "Unable to download episodes of your flow" when I try to submit my new podcast in iTunes. Food is created via Libsyn and FeedValidator says that it is valid. Work doesn't seem to be the problem.

    http://theembodiedwaypodcast.libsyn.com/RSS

    Your last episode is not valid.

    Take a peek in your account.

    Make sure that your last episode is a valid text file.

    http://castfeedvalidator.com

    If you check your feed here - you will see that it is not valid for the last episode.

    Rob W

  • iTunes cannot download episodes of my podcast feed

    I'm working on obtaining the sermons of our Church on iTunes. We have a WordPress site and I installed the Podcasting plugin seriously Simple (SSP). The food that gave me of PHC is http://wlcconline.com/feed/podcast. It will not be validated on Podcast Connect. I get a message that says that he "cannot download episodes from your workflow." He sees our album and lists the episodes, but cannot download them.

    I also tried to create a feed in Feedburner - http://feeds.feedburner.com/WithoutLimitsChristianCenterChurchesNewBernNc but got the same results. Our audio files are hosted through GoDaddy, not sure if this is a problem? Here is a picture of my settings in PHC. I'm not at all experienced in this area, so any help would be greatly appreciated.

    Is the URL given for your media top of page file

    http://wlcconline.com/Podcast-Download/1135/the-pursuit-of-success-in-life-part-3.MP3

    This produces a "File not found" error and redirects to

    http://wlcconline.com/images/uploads/sermons/SIL3.mp338058190audio/MPEG

    which is a web page that contains built-in readers. You should always check your Media URL file by entering it in a browser: should play directly in the browser, not in any kind of built-in player and it should also not force a download.

  • Error "Unable to read your flow." for RSS valid

    I'm looking to submit a custom podcast created to Apple via Connect of Podcasts. I'm getting an error "Unable to read your flow." wave without telling me what exactly is the problem.

    Food is works well in iTunes and check completely clean in the RSS W3 validator: e https://validator.w3.org/feed/check.cgi?url=http%3A%2F%2Fsassaman.com%2Frss%2Fcc

    I manually added the stream iTunes (version 12.3.2.35 on Windows 10) and it worked great for awhile. Every Sunday I add another episode of the feed and it downloads in iTunes, syncing my iPhone, everything works fine.

    Headers of the response of the application of wire - rss look good, correct content type and encoding. Food is displayed correctly in FireFox as well:

    HTTP/1.1 200 OK

    Cache-Control: private

    Content-Type: application/rss + xml; charset = utf-8

    Server: Microsoft-IIS/8.0

    X AspNetMvc-Version: 5.2

    X-AspNet-Version: 4.0.30319

    Date: Wednesday, February 24, 2016 02:13:22 GMT

    Content-Length: 21997

    So I can think of all possible tests the food is valid, including widely validated by Mark I eyeball that all tags are good. I'm puzzled.

    The only thing I wonder is that iTunes is somehow an analysis of enclosure and dislikes served from static links on Vimeo.com boxes? I wish there was some sort of mistake, I don't have an idea why it cannot read my podcast.

    Food seems to be OK. You have no episode 'itunes:subtitle' or 'itunes:summary' tags so your episodes show no description, but it would not have prevented the store read the stream. The episodes seem OK - the URL begins with https rather than http, but this used to be a problem it seems to be now. If they had problems with real media files episode the error message would say that they were "difficult to download episodes from your stream.

    So I don't know what the problem is. Maybe your server because the power is negative reaction to specific applications on the iTunes Store - this has been known to occur even though it is unusual - while being OK with the iTunes application and browsers. You can try to ask for the support of aid, but essentially they will only address problems at their end, not yours. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

  • Installation of Patch of the recovery Partition has been a success, but I am unable to download Service Pack 2 to upgrade

    Having the upgrade of questions after recovery on Windows XP Edition version 2002 service pack 1 family. Okay, I found the recovery partition patch I needed and download claims it was successful, so I then try to download the Service pack 2 and nothing happening, no error, nothing. Still not sure that it worked. Yet I am unable to download service pack 3 and my updates still do not work. So I guess that the Service Pack 2 does not load correctly. What should I do now? Help?

    The other post:

    Recovered Windows XP cannot be upgraded to SP2, think I need recovery for SP1 Patch of Partition. How can I find to download?

    Windows XP Home Version 2002 Service Pack 1 "computer" would not start. I could only get it back. This causes problems. Unable to retrieve the updates I have. Impossible to download the Service Pack 2 update the others. My automatic updates do not work. When I tried to download the SP2 it stops and gives me an error message: epplauncher.exe point of entry not found. Encode pointer was not found in the library of dynamic links Kernel32.dll.Can someone help me?

    Did you try and download directly to your computer and run it from there?

    Service pack 1 and service pack 2 Service pack 1 has joined in.

    Here are the links where you can download and install Windows XP SP.

    Service Pack 2: http://www.microsoft.com/en-us/download/details.aspx?id=28

    Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

    I hope this helps.

Maybe you are looking for

  • Why are you trying to force me to use Firefox version 9?

    Version 9 is bug according to my understanding, and you just made a new browser Firefox Araura who most likely will also be bad. I want to keep all the controls in 3.6.19. I like the way it works for me. The new version of browser delete the features

  • Upgrade memory on Equium L20

    I received an Equium L20 as a gift last year. About a month after getting it going, it was very, very slow. It turns out it was sold to me with only 256Meg RAM - not even enough for XP run! I am based in the States now and sent THREE different update

  • BOOTMGR MISSING MESSAGE ON START UP

    I'm having the same troublem with BOOTMGR is missing.  Can I also have the t steps back? My CD is no longer works now.  Thank you.  Jasmine (Shiela)

  • disable tabs while some elements are running

    Hello In the following VI, I try to get the "CAM" is disabled and grayed out tab while the Boolean value of 'Start in CQI' is set to True, and then become enabled again once the Boolean of 'Start in CQI' value becomes false.  I also like the "ACQ" ta

  • Application crashes after links compilations on the command line and running on Simulator

    Hi all I have a project where I need to link my static libraries built separately (but using the toolchain/compiler inside the BBNDK) for a sample application QML BB10.  I am relatively new to BB10 and its environment. Although the application compil