Yet cs6 selection vs activation button

Similar Questions

• Yet CS6 & DTS - HD MY

  I have 4 question still CS6:

  1. When I imported my 3 audio DTS - HD MA (2.0 1503 Kbps @ 24 fps, the duration of the audio is about 24:09) still tells me that my time of duration of the 3 files are 01:29:09, 02:03:12 & 0:29:03, why is this? I made these files on my mac mini with DTS - HD Master Audio Suite & I use Encore CS6 on my PC with Windows 7.
  2. What is 'export strengths in rich color for recall' because when I check it my buttons is not any color for the State of activation for my buttons.
  3. Is there a limit on how many menu pages are in a blu - ray player and is there a limit on the number of pages can be in a menu?
  4. I was just a simple blu - ray with a single menu of several page with 5 pages with 3 buttons of each and no video or audio. 15Mbps & pcm and I get this error message: error in Blu - ray: "fatal error", Code: "6", note: "Graphics buffer overruns." - couldn't multiplex with maximum IG PTS: 54900000 (in 90kHz).

  When I imported my 3 audio DTS - HD MA (2.0 1503 Kbps @ 24 fps, the duration of the audio is about 24:09) still tells me that my time of duration of the 3 files are 01:29:09, 02:03:12 & 0:29:03, why is this? I made these files on my mac mini with DTS - HD Master Audio Suite & I use Encore CS6 on my PC with Windows 7.

  When again important audio DTS - HD, it performs a background processing to determine the properties of the file (e.g. length of the file.) When this treatment is finished, the duration is up to what that he either found. You will receive a warning of duration changed thereupon. If you put the audio file in an Assembly, then you must adjust the time manually.

  If it is not happenning in case you, please try again to create the project.

  1. What is 'export strengths in rich color for recall' because when I check it my buttons is not any color for the State of activation for my buttons.

  "Highlight of export in rich color" is a new feature added to the CS6. This feature allows you to have your highlights done button for Blu - ray to richer color. This removes the point highest 2 bit color restriction that was imposed on Blu - ray. Now you can put an image rich in color as your strengths and you will be able to see that image on Blu - ray.

  But it still depends on the structure of the layer menu. If you have all the highlights layer (= 1, = 2, = 3), then it will show the = 1 for the Normal State, = 2 for the selected state and = 3 to the active state.

  But if you have a single layer highlight for a button, it will show as a layer for selected and active state. And if you have all of the two layers, let's say that you have only = 1 and = 2, then you will have no highlight for the third (active) State.

  Now you can check your menu structure and check what is the problem.

  3. is there a limit on how many menu pages are in a blu - ray player and is there a limit on the number of pages can be in a menu?

  4. I was just a simple blu - ray with a single menu of several page with 5 pages with 3 buttons of each and no video or audio. 15Mbps & pcm and I get this error message: error in Blu - ray: "fatal error", Code: "6", note: "Graphics buffer overruns." - couldn't multiplex with maximum IG PTS: 54900000 (in 90kHz).

  Actually, the Blu - ray specifications is no limit on the number of pages of menu but she has a limit to the buffer of interactive graphics. Having more pages with more buttons increases the size of the interactive graphics that gives this error.

  Hope that answers all your questions.

  -Riou.

• Impossible to navigate to and select the menu buttons during playback of DVD on TV

  I use DVD Studio Pro 4.2.1 on iMac OS 10.6.8 (using old BONES of FCP 6.0.6).

  I have two DVD players for my TV and a Sony DVP-NS57P-GE GE1105P.

  For the video I created, I have two buttons on the main menu 1, 'Play' and 'Chapters' which goes to menu 2 with my links 7 chapters. This perfect mode DVDSP simulate all the works by clicking on these buttons, but I can not click on these buttons of menu 1 with one of my remotes for DVD player when viewing on TV. Movies usually have a menu with buttons like play, scenes, etc. that I can navigate to with my remote.

  Remote controls work fine, I can use its buttons to move to the previous or next chapter while the video plays and the Sony has a strange menu page of access to the chapters but it would be awkward and should not be necessary. I just want someone to be able to navigate on my menu page 1 and select the link to chapters. Not really concerned about "play" button since someone can click play on the remote control.

  So, I apparently need to change a few settings DVDSP. What I'm missing here? Google it and I tried manual DVDSP, but no luck.

  Thank you very much.

  Jim

  No function edit posts, so I have to put this in a response, I guess. This layout of the forum is so bad, was so much better several years ago. It's looking like my post does not get a response for a reason, but in the cases where it does, I need to update.

  It seems that I am able to navigate to these buttons, I just couldn't see that because the 'Selected' colors, I put to them do not work. I have all the colors of the selection state set for Normal, selected and active. When I use my DVD in my sell order DVD or mode DVDSP simulate with button style control remotely to this topic, when I browse to the top, bottom, left or right, nothing to change the color of links, so there is no way of knowing when I am on a link (I have 9 on a single page) and you want to select and then press ENTER.

  I've hunted throughout the manual, google, YouTube and cannot find the answer to this problem.

• Why do I need to select the next button twice to move forward in my quiz

  I have a number of true/false and multiple choice questions in this project.  The user still has 2 attempts to get the correct answer with your comments.  When they are done with the question they are asked to select the button "next".  Selecting the next button does not advance the slide of the first time well.  You must always select a second time.  I played with adjust active and inactive times on the timeline, but that doesn't seem to have anything to do with it.  Remove the 'next' button is not an option at this stage because it is mentioned in the audio commentary for each answer to each question. Any ideas?

  If you insert a slide of questionnaire based on the model of default slides, normal stacking order is that the next button is below the Clear key. Maybe you had already removed the Clear button? Try to use Arrange to change the stacking order.

  You do not click the next button twice, you must click the button submit once, then press on Y or click the slide. If the suspension point is far from the end of the slide, it will take a while, if actions are left to "continue". Change the point to pause to be near the end of the slide.

• Wait for the user to select the OK button

  For my application, I can't use a simple MessagePopup where the user must select the OK button to continue.

  I created a new Panel with just a text message and an OK button to act as a MessagePopup.

  When I call InstallPopup and the box pops up that I have to wait until the user selects OK before continuing as the MessagePopup.

  How can I accomplish this?

  Thank you!

  John W.

  The popup has no effect on the mouse: it can happen that you have a function that manipulates the cursor before the popup is displayed? A SetWaitCursor (1); would be sufficient.

• BlackBerry Z30 voice activation button

  Is there a way to disable the voice (middle button) on the side of the camera activation button.

  This button is pressed accidentally easily.

  Bobexit0

  Try to turn the mute OFF where you see "open with the mute button" under "settings/voice control.

• CS6, "Select unused shades" is to select the samples used.

  In Illustrator CS6, "Select unused shades" is to select the samples used. I'm doing something wrong or is this a bug?

  I can't reproduce this in CS6 (Cloud, 16.2.1). version

  Maybe someone can check in 16.0.4 (?) so the problem can be reproduced.

  You can check if you updated to the latest version available.

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Conditionaly without refresh report view, when I select the option button

  Hello
  
  I have 5 option in an option button. I created 5 parts of report.
  I want to display region report, when I select any radio button then corressponding region report should be display. This shoude be without page refreshes.
  
  
  How can I do this...
  
  
  Thank you
  Ed
  
  Published by: Ed on November 3, 2010 06:16

  Kaushik, can you check one of the attributes of the region report ( region of change-> attributes-> region ID static ). It wouldn't hurt to go through the documentation before asking a question, especially when someone (Jari) had bothered you post the direct link for the answer.

  Another thing, have you even read the steps I posted earlier (on the changes that I made this page in your workspace), why don't you try the same in the apex 3.2 and see if it works? After all, you can see all the code that is there since its your workspace.

• Select a radio button via javascript

  Is it possible to select an option button using a script?

  I'm trying to select a radio button with the 0 value in a group called Department if a radio button with a value of 0 is selected in a group called TimeofCall.

  I tried this and several variants:

  If

  ((this. TimeofCall.rawValue == 0))

  {

  xfa.host.messageBox ("day is selected.");

  This. Department.rawValue

  == 0;

  }

  I get the message, so I know he checks the TimeofCall group but I can't seem to select an option button in the Group of Department.

  Any ideas would be appreciated.

  -Kevin

  You are the syntax is a little messed up.

  'This' is used to refer to the current object.

  Thus, assuming that the value you are testing is the current focus of basic education should be along the lines of:

  If (this.rawValue == 0) {}

  RadioButtonList.fieldname.rawValue = 0;

  }

  else {}

  //}

  If you test another area, it would be:

  If (fieldname.rawValue == 0) {}

  RadioButtonList.fieldname.rawValue = 0;

  }

  else {}

  //}

  Hope that helps! Going from memory for the moment...

• Select a radio button via ActionScript

  I am return a dynamic value from database and select one of the three radio buttons in a radio button group. I'm back three integer values from the database, they are 0,1 and 2. If 0 is returned I was to select the radio button of larry, 1 is returned I want to choose the radio button moe etc. Here is my group of radio buttons:
  
  < mx:RadioButtonGroup id = "radStooges" / >
  < mx:RadioButton groupName = "radStooges" id = "larry" value = "Larry" label = "Larry" / >
  < mx:RadioButton groupName = "radStooges" id = "moe" value = "Moe" label = "Moe" / >
  < mx:RadioButton groupName = "radStooges" id = "curley" value = "Curley" label = "Curley" / >
  
  Does anyone know how to do this? Thank you
  

  Use the selectedValue property of the RadioButtonGroup, for example:

  radStooges.selectedValue = 'Moe '.

  This will select the radio button of Moe.

  You can also use the selection like this property:

  radStooges.selection = Department of education;

• Run the report with parameters when, select the Radio button

  HelloW Guys
  
  I run my report with the report parameter form now, I want to when I select a radio button and then check if my only the list value = 1 then run A report if my only the list value = 2 then launch report B
  
  Report A and B contain the same parameter
  
  What can I do?
  
  I am writing this trigger button
  DECLARE+.
  al_button NUMBER; +
  pl_id PARAMLIST; +
  pl_id2 PARAMLIST; +
  START to+.
  IF: type = 'A' THEN+.
  IF: RepType = "1" THEN+.
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list * +.
  
  IF not Id_null (pl_id) THEN+.
  Destroy_parameter_list (pl_id); +
  END IF; +
  
  pl_id: = Create_parameter_list ('repPara'); +
  
  Add_parameter(pl_id,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id,'style_from',text_parameter,:style_from); -passing style ano parameter * +.
  
  * Add_parameter(pl_id,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  ELSIF: Reptype = "2" THEN+.
  pl_id2: = Create_parameter_list ('repPara2'); +
  
  Add_parameter(pl_id2,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id2,'style_from',text_parameter,:style_from); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id2,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id2,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  END IF; +
  END IF; +
  END; +
  
  Need help
  
  
  Concerning
  
  
  Wasim Ismail

  Dear Shahzab,

  As the parameters except a report type are the same, you can accomplish this task by comparing the type of report just before Run_product.

  You need to re - write the code as below:

  DECLARE
  al_button NUMBER;
  pl_id PARAMLIST;

  BEGIN
  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list *.

  IF this is Id_null (pl_id) THEN
  Destroy_parameter_list (pl_id);
  END IF;

  pl_id: = Create_parameter_list ('repPara');

  Add_parameter (pl_id, 'PARAMFORM', text_parameter, 'NO');
  Add_parameter(pl_id,'style_from',text_parameter,:style_from);
  Add_parameter(pl_id,'style_to',text_parameter,:style_to);
  Add_parameter(pl_id,'date_from',text_parameter,:date_from);
  Add_parameter(pl_id,'date_to',text_parameter,:date_to);
  Add_parameter(pl_id,'category',text_parameter,:Category);

  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  ELSIF: Reptype = '2'
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  END IF;
  END IF;
  END;

  Concerning
  Fassi Fihri

• yet cs6 chapter selection with remote control and button title

  
  Good evening... I imported links Dynamics throug a sequenco to still cs6. There are already some chapters, but if I press preview and I click Start film is not skip to the next chapter... No preview... I can skip chapters only if I start to see the movie from a chapter (2-5-7 is not important the number) in scene selection menu... could you tell me how I can solve this problem? Thank you... and to play on the menu... If I want to return to the main menu, once the movie started, he returned to the scene selection menu, not to the main menu... could you tell me what can do to solve these problems? Thank you so much everyone

  Please post a screenshot of your chart again.

• Pre-reading of the site no longer works, yet I selected him as activated

  Hello

  Until today, every time I used firefox, once I would start by writing to the address of the Web site, the address came entirely and I just to select. I think it is called pre-fetching of the site?
  Today, it has just stopped working, but I have not changed my settings.

  Best,
  Sandrine

  Another possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Photoshop cs6 selection installation language is in Japanese

  Photoshop cs6 DVD has been closed and labelled for distribution only in North America. After choice of installation and putting in the serial number that has received a green check mark, asked me to make a selection of the language. All three choices are Japanese characters and the button FOLLOWING is "grayed out".  All screens before that were in English.

  What job around here?

  you need a serial number for an English version.  Contact the vendor.

  [moved from the installation, update, & members of Acrobat download, installation, commissioning]