Yet deleted

Similar Questions

• Delete of the HDR-CX190E

  Hi guys, I have a Sony HDR-CX190E and wonder if there is a way to remove images (files) other than to have to make it through the camcorder itself?

  I use the software it came with (House PlayMemories) but there seems to be a way to delete files. Even if I tag the option 'Delete imported media files to the device or media' is not yet delete the file once it is important.

  However, I am able to go through the menu on the camcorder and remove it from there, but it's really painful to have to do it this way.

  Any help would be great. Thank you.

  Hi amaru96! It is possible to delete media files using the computer by accessing the folder where they are saved. Once you have opened the file folder, you can then delete the selected files or all of them. It is always recommended to delete data through the options on the camcorder. Apart from the delete option, you can also format the memory card holder to clear all registered in all at once. Here are the steps to remove by using the Format option on the camcorder.

  • Go to the Menu of the camera.
  
  
  • Select the installation program or the Toolbox icon.
  
  
  • Find and select [Format].
  
  
  • This will clear all data Save on the memory card.

  If my post answered your question, please mark it as "accept as a Solution.

• I think my e-mail system is automatically remove emails over 2-3 months.

  I've been in tools / accounts settings / disk space and it is marked "don't delete all messages" but I only seem to have all the messages from July 27, 2015. Also a lot of those randomly for before this date in 2015, and about 30 very random emails from 2011, 2012 and 2013, 2014.
  What gives?

  If you have not recently compacted, your files can be inflated with old messages that were not removed from the queue.

  Do not compact your folders until after reading the following article. Your messages of missing peut be recovered.

  http://KB.mozillazine.org/Undelete_a_message

  All messages in a folder are stored in a large file. When you delete a message, it is only MARKED as deleted. It is not yet deleted. The entire message is always in the file.

  When you Compact a file, you force a rewrite of the record and remove all traces of the deleted messages, making the file smaller in size. Messages marked as deleted are now unrecoverable, unless you have a saved profile from just before compacting was done.

  The mozillazine article mentions a Thunderbird Add-on
  "Recover deleted messages which is connected to the-
  http://NIC-NAC-project.de/~kaosmos/index-en.html#recDelMsg
  that takes you to
  https://freeshell.de//~kaosmos/index-en.html#recDelMsg
  This is not an official site of Thunderbird, but many users have downloaded Kaosmos modules without problems.

  It can help.

  TB - 38, 3 Win10-PC

• When I open firefox v 37.0.2 that open all the tabs from the previous session, I do want my homepage tab to open

  This problem started when I refreshed recently Fire Fox due to other problems I had. Options > general > fire fox on startup is set to 'show my home page ". In the support forum, I found another user with the same problem and the solution for him had to do with the user.js file in the profile folder? Subject: config? In any case, the answer was to delete that file, or better yet delete all the text in it and save this file empty and set it to read only to prevent it from reappearing. That's all beyond me and my skinny computer knowledge and I don't even know if I have a user.js file. Help, please

  My problem is now solved. I don't know if there's someone else out there who would do what I did, but just in case, I'll tell you at the end of the day, what was causing the multiple tabs to open every time I opened Firefox, at least as far as I understand. While I contemplated the helpful response more returned hoping to understand what was wrong with my Firefox, my son has shown out of town and 5 minutes, he found out what I did wrong. In Options > general > Home Page, I got an address which included not only the home page I wanted 'Google News', but apparently the addresses of all the other tabs this guarded appearance until when I started towards the top of Firefox. Maybe it's not exactly the right explanation, but change the homepage to "News.google.fr" solved the problem. Thanks to everyone out there who gave their best to help me, I'm sure it's hard to solve problems like that when he would never come to you that someone would do the things they do. Thanks again.

• Backdoor.Breut somewhere in the Inbox

  Hi all the support of Mozilla dedicated people,

  The last 3 days, Symantec has been advising me to find a risk of 'Backdoor.Bruet' and specifies the location of the file:

  C:\Users\Lucia\AppData\Roaming\Thunderbird\Profiles\jkwxs3ov.default\ImapMail\mail.stockwatch - 1.\INBOX > > Unknown033EABBB.data > > invoice, .rar > > invoice,------.

  The Inbox is a Thunderbird file I do not know how to access (except of course through Thunderbird).

  Symantec identifies and RECORDS the risk, but then the option LEAVE ALONE and remediation status is UNSUCCESSFUL - OWN RISK SECURITY FAILED. FAILED TO QUARANTINE.

  I was able to go up and down my 1000 emails and have not been able to find the guilty email, so not him have not yet deleted. I'm not wanting to remove the file from the Inbox, but am willing to try. I use IMAP, so the email function maybe too much on our mail server.

  Please tell us how I could find the infected e-mail and deletes the Backdoor.Bruet from my computer.
  Also, please tell us if this may have infected my iPhone 5s that I use for email too.

  Thanks Mozilla community support!

  PS. I like Thunderbird and Firefox. Best email and web tools ever!
  PPS. My image is not downloaded, but I have several. I'll post this issue to move forward. I have screen shots, if necessary.

  Right click on the folder, select compact.

  See http://thunderbirdtweaks.blogspot.com.au/2011/07/compacting-what-is-it-and-why-must-i-do.html

• Organizer of photos on the top of iMac desktop computer

  I just bought a new iMac and have transferred data from my previous iMac. Also, I transferred the contents of iPhoto to Photos. (total about 13 000 pictures). I used to use iPhoto to organize and view my photos and Photoshop elements 11 as an external editor. I found iPhoto had a system much better organize Photos than if I want to stop to use the Photos. Can someone tell me how I can transfer the content of Photos to a new folder/folders in images. Then, I'll use Photoshop elements 11 and its Organizer I already installed on the computer to edit and organize my photos. I've not yet deleted my data from my old iMac.

  Notes on the migration of an iPhoto for iPhoto to Photos for Mac library

• several problem of bases with a project

  Hello everyone,

  Sorry for my English in advance, you will see some errors probably: 3 I hope you understand anyway!

  Well, I am a beginner with labview and I work in a project on a system that may take measures of speed and strength.

  I have already created several VI:

  -One for speed

  -One for the force

  -One to make a report

  - and another at the choice of the type of the event.

  To summarize, the system having to control 2 types of measures: 24 mph and 28 mph and we must conform to this 2 different tests, obviously.

  The goal is:

  (1) see the first VI: type of measure and leave the choice to the user about 24 or 28 miles an hour and then Labview tell if it complies or not after the measurement.

  (2) display the VI that show measures speed for users;

  (3) display the VI that show measures of force;

  (4) and finally the last VI to carry out the report: I have integrated checkbox, etc..

  I would like to help users switch in this VI through the buttons "previous" or "next".

  I already write a 'hand '. If I run the main I had a first push button to go in a VI, and then I had a few 'next' buttons to display the next VI.

  But now I have different problem and even if I try to tackle him I really don't understand how...

  I will develop my problems:

  -The main problem is execution of these screws: the test is in the 0, 6s. So I would run each VI during the test, record data and only then to show different for users through these VI data as I explained before. For the moment, as I understand it, my work just run different Vi when I click on the 'Next' button and finally I don't want to do that.

  -Another problem is that, in fact, the user can navigate between different VI, but they are not yet delete when the user clicks 'next' Finally it does nothing actually. In the example, I want the user to look at the speed of data, write them on another file, and then click Next, sign before removal and next show, write to another file, click Next, etc... and I do not understand how it is possible...

  -Finally, I think it's possible, but the best thing for me would be that different data stored in a file, with everything which is located on the front panel. If I had a graph, I would like the graph in a file, etc. And in the example for my last VI, the report, thanks to the box. If something is check, writing to a file, and if it didn't ignore it.

  Sorry for this very long text and my bad English. I hope you understand my problem... I really need help-_ - I am disappointed, this is an important project for me (learning) and I tried a lot last week, but I ask you cause now I have really idea more...

  Thank you in advance,

  I join my project to receive a little help and explanations for this problem

  Hello Xfly

  I think you should use secondary. Since you have two screws (according to my understanding) and the user has the opportunity to work in a vi and then move to the next vi. You can use 'insert into secondary' and change between two screws.

  hope this helps

  concerning

  V.Senthil kumar

• Run each VI but then show after a different action by the user

  Hello everyone,

  Sorry for my English in advance, you will see some errors probably: 3 I hope you understand anyway!

  Well, I am a beginner with labview and I work in a project on a system that may take measures of speed and strength.

  I have already created several VI:

  -One for speed

  -One for the force

  -One to make a report

  - and another at the choice of the type of the event.

  To summarize, the system having to control 2 types of measures: 24 mph and 28 mph and we must conform to this 2 different tests, obviously.

  The goal is:

  (1) see the first VI: type of measure and leave the choice to the user about 24 or 28 miles an hour and then Labview tell if it complies or not after the measurement.

  (2) display the VI that show measures speed for users;

  (3) display the VI that show measures of force;

  (4) and finally the last VI to carry out the report: I have integrated checkbox, etc..

  I would like to help users switch in this VI through the buttons "previous" or "next".

  I already write a 'hand '. If I run the main I had a first push button to go in a VI, and then I had a few 'next' buttons to display the next VI.

  But now I have different problem and even if I try to tackle him I really don't understand how...

  I will develop my problems:

  -The main problem is execution of these screws: the test is in the 0, 6s. So I would run each VI during the test, record data and only then to show different for users through these VI data as I explained before. For the moment, as I understand it, my work just run different Vi when I click on the 'Next' button and finally I don't want to do that.

  -Another problem is that, in fact, the user can navigate between different VI, but they are not yet delete when the user clicks 'next' Finally it does nothing actually. In the example, I want the user to look at the speed of data, write them on another file, and then click Next, sign before removal and next show, write to another file, click Next, etc... and I do not understand how it is possible...

  -Finally, I think it's possible, but the best thing for me would be that different data stored in a file, with everything which is located on the front panel. If I had a graph, I would like the graph in a file, etc. And in the example for my last VI, the report, thanks to the box. If something is check, writing to a file, and if it didn't ignore it.

  Sorry for this very long text and my bad English. I hope you understand my problem... I really need help-_ - I am disappointed, this is an important project for me (learning) and I tried a lot last week, but I ask you cause now I have really idea more...

  Thank you in advance,

  I join my project to receive a little help and explanations for this problem

  Hello

  With your architecture, it is obvious that you can't go back.

  I would be more appropriate to have a main.vi with a State for example machine calling Subvi through sub - VI supanel controls front themain.vi.

  Here are a few documents:
  http://digital.NI.com/public.nsf/allkb/D587067E18E0E70186256D44007B91FE

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/loading_panel_in_subpanel/

  Adrien

• Aspire 9805 - no graphics but messages very well

  So my 9805 sucks old but formerly robust was blowing only fine until this morning.  The unit displayed in the bios then frozen.  After checking everything I finally seeded and redefined the RAM, cmos (disconnected the cmos battery and reconnected in) removed the battery and the hard disks, etc. and put back together.  I am now able to enter the bios and raid Intel screens however if I try to boot into anything "Graphic" it just hangs.  For example, no windows, no windows wouldn't boot cd acronis true image or graphic of Seagate seatools charger not even.  If I am on the back like screens (bios, raid, Intel, etc.), weather and display is fine.  I could even begin on 'text' of Seagate diagnostics to detect the disks are fine.  I tried to start with and without the battery and hard drives and about all the other combo I could think.  The system, trying to display graphics other than the style of 'Back' just stops, forever.  I was thinking maybe a bad integrated video processor except usually they do not continue work correctly in non-graphical mode.  Any ideas or suggestions are appreciated!

  I think that I figured it if that seems odd...

  I tore the laptop everything down again last night literally removing everything that was not glued (wireless, bluetooth, readers, ram, battery, you call it) then put a couple different sticks of RAM back (with him remains yet deleted) and started up a diagnosis with the graphics CD to see if it would start.  He did.  Progress.

  Then, a device at one time I put back in the original material and tried to start to make sure that this device has been authorized.  Finally, the original RAM was the culprit.  One of the DIMMS tested with errors in memcheck, 2 so I let on and spin on the other original with half of the ram but everything starts.  I've seen many questions ram in my time, but none that has caused a system do not display graphics of any kind.  Usually they just blue screen or lock upward.  Guessing the chip from nVidia G73 was attempting to use the RAM of the system that was wrong every time.  As I said, weird, but at least it works again.  I just wanted to post an update in case someone else runs into this.

• DISCS DVD BURNER / can I replace it with new grade DVR_RW and software up, which comes from withDRIVE

  Have more old Dell computer/Dimension 4500/P4 2.4gig / iGig Ram

  running WINDOWS XP PROFESSIONAL,

  ? He is working have new in the box of DVD burner/22XDVD + R writing speed.

  8.5 GB DVD + Double layer 16 x

  DVD_R 22 X / DVD + RW 8 X/DVD-RAM 12 X / 16 X/DVD-R DL 12 X DVD + DL? CD-R48x/CD-RW 32 x.

  Registration of NERO software (Nero Express in CD)

  CyberLink & playback software

  (PowerProducter, Power DVD)

  Process CONTROW PANEL? Remove sign dvd player / then turn off computer computer open remove old drive IDE cable

  and DVD player instal Moses / if the sound card has Digital Imput add a new cable of cable/ide audéo,.

  When starting in safe mode to remove any old player not yet deleted.

  computer restart lodge on add new hardware chect, should ask to reboot to complete. ?

  If it works? Feedback wellcom

  THANKS: 4ROB

  Hi 4ROB,

  You will be able to connect the DVD recorder and install the Nero app on it, but the reader must have the connector of the IDE cable instead of SATA cable connector as the Dell Dimension 4500 comes only with the IDE connector on the motherboard.

  Please respond to all queries.

• questions about upgrading to version 6

  Hello

  I've read all the version 6 release notes for the various components of vmware and I have a few questions, I hope someone can help me with:

  (1) now, I installed on a separate windows server vCO. The release notes, this method seems to be a dead end and I should get used to the device now. Correct assessment? VCO is always installed with vCenter server installed on windows?

  (2) in the 5.5.1 release notes, there was a mention of SOAP being obsolete, but I see no mention of this in the notes of version 5.5.2 or 6.0.1. Is always SOAP or only access REMAINS? VMware has changed mind about the withdrawal of SOAP?

  (3) to pass all my actions and workflow Windows (vCO 5.5.1) has the unit (or another windows server I have the intention to rebuild), it is simply a matter of exporters and importers?

  (4) for the initial Setup, the date of issue to new referring to the fact that the old method will not go away. From what I can tell, basic items only (connection IP address and vcenter) are performed via a web site. After that, I need to use the client and run the correct workflow? (Similar to the change that was made to the AD plugin a couple versions back?)

  (5) I have a workflow that copies a file into the guest operating system. This file is stored in a folder on the server of vCO (Windows). Is this possible with the device or what I need to rework my workflow to get the file to prompt another way?

  (6) the vCO can work with an external SQL database?

  Thank you

  Hello

  (1) vRO windows installer is not delivered with vSphere windows install. Technically, it is still available in 6.0 although I don't know if you can download it separately. So yes, better get used to the device.

  (2) don't know why SOAP is not listed as obsolete in release 5.5.2/6.0.1 notes, but it is always inadvisable. It is not yet deleted so you can still use it, but the recommendation is to spend the REST (REST Java SDK or crude REST API)

  (3) correct. Perhaps the simplest is to create a package, put all your custom inside actions/work flow and then export/import the package.

  (4) Yes and no. The old configuration Web UI is always there to 6.0. Plugin configuration must be made through workflow. Part configuration server (network/authentication/database / etc) in 6.0 can be configured via the old user interface and workflows.

  The old Web user interface will be kept for compatibility with plug-ins partner who have not yet passed their workflow configuration.

  (5) should be possible even with the machine.

  (6) of course. Databases supported by the windows installation are also supported by the device.

• Question of positioning

  I have a simple question of positioning.

  I try to get my Web page positioned in the center of the screen. I thought how to do which was to set to "relative" and then on the right and left that both the value 'auto '.

  This is how I always got it done, but obviously I did something worng on my current page. Here is my code so far. Any help would be appreciated.

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  index.html < title > < /title >

  < style type = "text/css" >

  {body

  background-image: url(Images/website_background.jpg);

  }

  . Container {}

  margin: 10px;

  Width: 900px;

  left: auto;

  right: auto;

  position: relative;

  }

  . Header {}

  margin: 10px;

  float: none;

  height: 150px;

  Width: 872px;

  border: medium double #000000;

  }

  . Sidebar {}

  padding: 10px;

  float: left;

  Width: 150px;

  border: medium double #000000;

  }

  . Happy {}

  Width: 872px;

  border: medium double #000000;

  }

  {.navbar}

  margin: 10px 10px 10px 10px;

  padding: 10px 0px 10px 0px;

  height: 30px;

  Width: 880px;

  }

  body, td, th {}

  color: #FFFFFF;

  }

  .footer {}

  height: 100px;

  Width: 845px;

  border: medium double #000000;

  padding: 10px;

  }

  a {}

  do-size: 16px;

  Color: #00FF00;

  }

  a: link {}

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #999999;

  }

  a: hover {}

  text-decoration: underline;

  color: #FF3399;

  }

  a: active {}

  text-decoration: none;

  }

  < / style >

  < / head >

  < body >

  < div class = "container" >

  < div class = "header" > contents of class "header" goes here < / div >

  < div class = "navbar" >

  class "navbar" goes here < /p > < p > content

  < div class = "sidebar" >

  class 'sidebar' here goes < /p > < p > content

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < / div >

  < div class = "content" >

  Class 'content' here goes < /p > < p > content

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < div class = "footer" >

  class "footer" goes here < /p > < p > content

  < / div >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  Chris

  Do the following mods

  . Container {}

  / *margin: 10px; */

  Width: 900px;

  margin: auto;

  / *left: auto;

  right: auto;

  position: relative; */

  }

  or better yet, delete everything above and add the highlighted

  {body

  background-image: url(Images/website_background.jpg);

  Width: 900px;

  margin: auto;

  }

  If you choose the best option, so don't forget to remove the

  ...
  of your document.

• Uninstall oracle software

  Hi all
  I want to uninstall oracle 11g software. There is no instance. I run the program and when I run universal installation remove the greeting received oracle. I have to open CLI and type:
  
  C:\Users\___ > f:\app\oracle\product\11.2.0\db_1/deinstall/deinstall
  
  Ultimately, I got error:
  Failed to remove service 'OracleOraDb11g_home1ClrAgent' on the local node.
  Oracle Universal Installer cleanup completed with errors.
  
  So I can't yet delete sw and app folder. How can I remove oracle sw?
  
  My OS is Windows 7.
  
  Kind regards
  Rustam
  
  Edited by: rustam_tj may 18, 2011 09:09

  Salvation;

  Pelase check my blog entery:
  http://heliosguneserol.WordPress.com/2010/10/27/how-to-remove-Oracle-11gr2-on-Windows-7/

  Respect of
  HELIOS

• Color of unwanted background around titles in the navigation bar

  I can't understand how to get rid of the color gray surrounds the words in the 2 bars of nav on the Sub page.  Help, please!

  http://www.csrdesignco.com/csr_portfolio.html

  In http://www.csrdesignco.com/csr_style.css

  Delete the following text

  a {}
  outline: 0;
  background-color: #E6E6E6;
  }

  Better yet, delete the rule entirely.

  It serves any purpose for your website?

• Acrobat 8.1.4 dies after 10 seconds

  Acrobat 8.1.4 dies after 10 seconds.  This is new behavior today after running fine for months on Windows XP/SP3.  No matter if Acrobat is opened indirectly through an opening of file in Explorer or directly from a shortcut or start / programs.  Sometimes I can get an open file but don't have no time to do something with it before disappears from the Acrobat window.  Related previous discussions the same problem on a Mac have no idea.  I see no error reports, no Dr. Watson, no Windows, nothing Adobe event.  I'm not aware of any change in the system for at least several days, including updates of Windows that would have required Admin approval before you download and install.  Don't have not yet deleted and reinstalled but other reports suggest that it is only a temporary fix if anything.  Ideas?  Or Adobe suggests that I've upgrade to V9?

  You could try doing a repair Acrobat (under the Help menu) installation first. Here are some additional troubleshooting tips - such as deleting the tmp files that Acrobat checks during the startup process.