Yoga of 1050F WiFi authentication problem 2

Similar Questions

• Yoga 2 1050F - Boot problem

  Someboty can help to achieve the support of Lenovo? My screen see Yoga 2 1050F tablet as bios of windows and do nothing else. Serial number-*.

  Thanks to everyone for helping me.

  ONLY 7 DAYS LEFT UNTIL THE WARRANTY ENDS 11/20/2015!

  Mod edit: serial number deleted to protect the owner from unwanted use.

  Additional information added to the subject line to clarify the problem.

  
  

• Authentication problem when you try to connect

  I have a Linksys router. Connected WN2000RPT as described in the instructions of Netgear. Everything went through the lights very well, good, EXT appears on the scan available networks, etc. Tried to connect a Smart TV Vizio and burn TV Amazon tablet Asus. All 3 devices show... EXT with a strong signal. However, each device does not, connect with an error message 'Authentication problem' or simply 'cannot connect."

  My router is connected using personal safety ' WPA2/WPA mixed. " When you configure the wifi extender, I said to use the same SSID and the security that the router setting. Online reading on the settings available on the WN2000 and decided that the problem was perhaps a "lag" in the security implementation because WN2000 is not the same as available router setting. Do you have a factory reset on extension and returned to through the procedure, only not selected use the same level of security as a router, but manually selected WPA/PSK (AES) for the Extender. Same exact error of my devices as before.

  I thought that maybe by using the security settings of the router it was to spoil the Extender because they do not have the same settings available. But perhaps using different parameters (when the Extender receives the signal from the router, but perhaps on a "pass-through" only basis?) problems as well?

  So, can someone tell me if there is a way to get my devices to connect to the Extender, or this is always going to be a problem because the router has a security setting, and if I manually set the security OR say scope to use the same security settings, it will not work because the two units are not compatible? I'm doing something wrong? Any ideas? Thank you!

  Hello RealisticDave

  Did you have a different SSID on the router and not the same as routers SSID?

  DarrenM

• Password WIFI WRT110 problem

  Hello world

  I have a very strange problem.  First of all, I told chapter of wireless security WPA and typed in my password.  However what connection in my name of the wireless network of my password never worked.  Second, I completely disabled security and tried to just connect without any password, but I was still asked a password however.  I checked and checked and saved the settings by ensuring that security has been turned off, but I was still asked for a password when choosing my wireless network!

  I could probably restore my WRT110 to factory settings, but I don't want to lose the other configurations as some open ports and IP addresses, that I opened for the firewall.

  Is it possible for me to fix my WiFI password problem without restore factory default?  I just need to understand how to operate the the WiFi passpharse.  Here's what I have here:

  Security mode: WPA Personal

  Encryption: TKIP

  Password: 0sunspot0

  The key renewal: 3600 seconds

  However, when I get my wireless network and try to connect by typing in 0sunspot0, I get an authentication failure.

  I'm doing something wrong?

  Thank you

  Victor.

  Save all your settings, so you can restore them after a reset.  Remove the password completely and try to connect without password.  If successful, go back and add WPA2-AES with a new password without special characters.   No test.  If no joy, hard, reset the router and restore it from your back upward and try again.

• Iconia A1-830 has a Wifi connection problem when 3-5 meters

  I bought Asher Iconia A1-830 at BestBuy and after 10 days, I discovered the Wifi connection problem. If you stay near router (1-3 meters) the WiFi signal is good (not excellent). If I go into another room - Wifi connection is poor or disabled. I changed it to another (same model). The second model is perfect only 1.5 months and now she has the same problem with wifi connection. Can someone help me? Maybe the problem in my router, but why it worked 1.5 months?

  Yesterday, I received my return of repair Acer Iconia. They wrote the reason of the problem: reconnected hold of WiFi to the motherboard. It now works like new!

• HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

  Hello

  My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

  I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

  I restored default Windows 7 Home but this does not work either.

  I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

  I have checked and then changed the values in the BIOS by default, but this did not help.

  When a WiFi USB is plugged in, the PC works fine.

  Under the battery, the WiFi device is referred to as "bcm94313hmgb".

  Any idea?

  Say hello to new mscag.

  Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

  I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

  HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Let me know if plug this cable solves your problem.  Have a great rest of the day!

• WiFi intermittent problem. Win 10 think it is connected when there is no Internet.

  WiFi intermittent problem.  I have a 2 month old Dell Inspiron 15 5559 with dual band Wireless AC 3160 adapter Intel.  I connect via WiFi, start Pandora with Chrome and everything works very well for a few hours.  I monitor the status of the WiFi and noticed that when the speedometer drops to simple numbers temporarily, then resumed at 50 Mbps or more a second or two later, my browsers (Chrome, Firefox, IE, Edge) no longer work even if icons indicate "connected, secure" and LAN activity continues.  Pandora and all other browser activities cease until I have disconnect and reconnect.  The router, I had this problem with that is a TP-Link wireless-N that works perfectly with other computers, but I purchased & installed a D604 of D-Link router wireless AC to see if this can solve the problem.  It has exactly the same problem on both the 2.4 and 5 GHz bands.  Device Manager displays an Intel driver version 18.11.0.8 dated dated 22/06/2015 apparently normal and no! or? any where in the list of devices.

  So the obvious conclusion is that when the power of the signal is temporarily less than 10 Mbps for a second or two, then returns to the top 10 Windows thinks there is a good WiFi connection when it is not.  Disconnect and reconnect always solve the problem, but it's an obvious bug, and it's a pain.

  Hello

  I'm glad that you finally got this driver to install.  Microsoft has done a lot with Windows 10 trying to reduce the energy consumption on laptops.   In some ways, that has caused some problems with the wireless, making cards more susceptible to interference.   I hope that this driver will clear up many of the conflicts and problems that you see.

  Let us know how it goes.

  Todd

• BIAPPS-ODI authentication problem

  Hi friends,

  IM at biapps 11g with ODI 11 g. I configured connection odi in the studio and can properly connect to see these maps std BIAPPS in ODI.

  But 2 days before, im in the face of an authentication problem by connecting the ODI studio with the user who I connected successfully forward.

  The error that I'm facing here is the

  ODI: 26130: could not connect to the repository, ODI-10190: user dev_biadmin has his account has expired.

  
  

  Im getting the error above and the user tried to connect is "dev_biadmin" in the studio of ODI.

  
  

  Therefore, to the question above, I followed the MOS score below

  
  

  ORS Installer fails with ODI-10190: user FUSION_APPS_PROV_PATCH_APPID has his account has expired (Doc ID 1666023.1()

  
  

  IM facing the same error explained in the note above, but force helped me because it treats FUSIONAPPS BI I guess.

  
  

  Kindly advice me friends, to solve this problem.

  
  

  Brgds,

  Saro

  Hi, Saro,

  Connection to studio ODI as a SUPERVISOR user. Go to ODI--> Switch authentication mode--> give your contact information to ODIREPO and sign in.

  You will get the message properly connected. Click the Security tab. try to connect as a SUPERVISOR. Once the connection is successful. Go to the user of the cprresponding (dev_biadmin) account and change the password.

  Logout and go to ODI--> switch authentication mode. Give the details. It will change external authentication. Now you should be able to log in as dev_biadmin.

  Hope this will solve your problem...

  Kind regards

  Vanina

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• Yoga 2 1050F - Constant WiFi connection problems

  My Tablet constantly loses its WiFi connection almost every few minutes and then reconnect. Someone at - it help him?

  SOLVED... I just let everyone know how I fixed this problem. I went into my settings manager hub and off the 5 GHz that feed then only 2.5 ghz was available and now well worked very well.

• WIFI Lenovo A5000 authentication problem

  Whenever I try to connect to my new Lenovo A5000 in my WIFI connection, it will be said: the problem of authentication.

  -Ensure that you have the password
  -Make sure you have the latest firmware
  -Test with another router wireless

• ZTE A2109 WiFi authentication with Devolo dLAN 500 WiFi problem

  Someone has the same problems, I can't get a solution for this! My ZTE has therefore no connection to the Internet!

  Thank you and yes there is some confusion between the password and key wifi!

• Yoga Pro 2 - Wifi only B/G, no N

  I bought a Yoga Pro 2 from BestBuy the other day, and my roommate. We are IT guys and this for a living. We both noticed on ours we do not have Wireless N capability. We can see only B/G networks. When it is connected to the speed of the network shows 56mbit. If you go into Device Manager and the properties of the wifi adapter, then advanced. Only shows the option from the bottom to the wireless B, G, G/f options modes. No N. I know he has only 2.4 ghz and 5 GHz not. We have updated with the latest driver on the Lenovo Web site, both used the most recent site of the Intel adapter.

  I know there's a huge thread on the problems of wifi, but it seems to be disconnect and other problems. Nothing specific to see or connect to a 2.4 ghz Wireless N network. Anyone see or hear the connection issue or see N Wireless?

  Any ideas?

  Wireless n for 7260 is called "Mode of HT. To allow this one. Make sure that the router as wpa2 aes is the only security and wmm is enabled in the page of QoS. You should get connection N.

• Home Wifi connection problems

  Recently received hp slate 7 for Christmas and put in place without any problem so far.  Disconnect the wifi guard while at home and does not recover.  When you try to reconnect it can't to Authenticating and not go further, as I turned the wifi switch on the slate, tried to check the updates, power off and power on Slate and restarted our home hub with no joy.  We have other products at home using wifi and have no problem with them.  Can anyone help?

  Hello and welcome to the HP support community!

  Have you tried to tell the tablet to "Forget network" for your home router?   Go to wireless settings and press and hold on the router.  You will see a choice between Forget or change the network.

  Set up the connection again and see if things improve.

  WyreNut

• Connection of Z10 Wifi blackBerry problem

  I have problems connecting to a certain WiFi network.

  When I set this up, everything works perfectly. (Network Eduroam University with certificate authorization and eap tls).

  But when I move from one point to another that the login is disabled and when I turn it on again once I always get one of two errors:

  -Invalid EAP login data

  -Network authentication failed. Check network security preferences

  I greeted handover between Access automatically points. Can I prevent deactivation by switching wifi and before changing the location (not very convenient)

  Once the connection is disabled, I have to restart the BlackBerry. After that I'm more able to connect.

  Network administrators can not help me.

  It is very annoying and no iPhone or Android don't seem to have this problem. With my old Bold 9700 the automatic change of the access points have worked perfectly.

  Is there something else I could do?

  Thanks in advance!

  My device

  Z10-STL100-2

  SW 10.2.1.2102

  Since the last update (10.2.1.3247), the problem disappeared and constantly appeared again.

  Can't say more but I'm happy!