WiFi intermittent problem. Win 10 think it is connected when there is no Internet.

Similar Questions

• Connectivity Wifi Envy100 problem

  I have set up my envy 110 printer problems after moving from the United States to the Australia.

  It worked very well in the United States. I have connectied with the USB and works fine.

  Then I used the configuration utility to convert a Wifi device, but the old address will be not updated to the new network.

  The printer indicates that his current address is 192.168.1.11.  All the devices on my home Wifi are 192.168.0.xxx.

  The printer says it connects to the network and all right and he gets a new address, but then it has the same old address of 1.11.  I can not connect when there was the adresse.1.11. The installation utility only allows to ask the router for an address, but it always comes back with 1.11.

  I tried to put the mac address into the router with an address static de.0.47 but the ptr does not take into account.  While the printer says that it is connected to my network fine, the router can not see the printer.

  I would like to set manually the IP address but does not appear to have a utility that will allow me to set the IP address manually.

  Any suggestions?  IP addresses might be the opposite in the southern hemisphere.

  Hello again,

  I was looking through the tools of printers and came across a feature for the parameters of intellectual property.  Go in there, you can select manual or automatic.  He was set to manual.  I changed it to automatic and now everything is fine.  He is immediately connected to the router and received a new IP de.0.12.  It's really weird because I had never played with this setting.

  It was hard to find because the scroll on the touch screen feature is very difficult to use.  He always goes in the point instead of scrolling.  I didn't know that there are more options if scroll you down.

  The printer now works correctly.

  Thanks for your help.

  Greg

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Need help creating automatic setup of WiFi for XP Win 7, etc... Get errors on XP

  I have 100s of Win 7 and Win XP computers and I need a way to automatically configure WiFi. Some will be made for students and others for personnel etc. I did hours of research on this mega and using a Win 7 PC to create export to a USB key that is susposed to work on all versions of XP upwards. But, of course, it isn't. This works for Windows 7 and Vista, but not for XP.

  Here's what I did...

  1 a tried using the XP "Wireless Network Setup Wizard" to my XP PC. But it is defective and not allow you to create an installation WITHOUT any encryption, of course it is not acceptable as our WiFi does not use it. We use a system of Access Point Aruba which forces authentication VIA AD/connection on the first attempt to navigate the web. No encryption AT ALL as much as the WiFi client installation is concerned. I also did a profile exactly as I want only it except that I put in bogus WEP settings so it creates the SMRTNTKY with the WSETTING file. WFC file in it and then edited the. WFC to remove file but then it wouldn't work which is NOT ACCEPTABLE.

  2 went to a Win 7 PC as it does from there is supposed to work on Vista and XP too and had no problem using the option 'Copy this network on a USB flash drive profile' and it works perfectly for Win 7 and Vista, but - error on XP with the following message...

  The wizard found no information needed to set up a network, or the information was not usable. Try to rerun the wizard to your original computer.

  After reviewing the files generated between the XP method to export a WiFi profile to a USB key and how to Win 7 well, I found the following differences, all related to security settings. Of course, it's a bug or a design defect and a BIG problem for the IT Pro.

  Here's what my two WSETTING. Resemble WFC files.

  For XP I have:

  
  
     
          011C0F3E-EB0F-46B8-BA95-267ADEA25EC3
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          WEP
          12345
          0
          0
     
  

  For Win 7 I have:

  
  
     
          01BC3658-4F27-42D1-92F7-3F7CF581A75E
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          None
         
          0
          0
     
  

  There seems to be ONLY two lines which differ between the two files and are as follows...

  For XP:

  WEP
          12345

  For Win 7:

  None
         

  As you can see that the difference is in the security settings that I don't use. (This is a choice made by the powers above me and I have to work with that. MS should keep in mind at ANY moment the IT pro should have the last say on optional parameters is NOT MS)

  It seems that Microsoft, when they created this tool never intended be used by computer professionals as they force the settings for the IT Pro to decide at ANY TIME, not Ms.  IE to use WEP/WPA etc, or NONE.

  So am I missing something? How do I create an automated way I can run thousands of times without error on XP, Vista or Win 7 to configure profiles WiFi which will have NO apparent safety, but who actually do?

  I would VIA reg setting if I knew where to find all the reg settings to do, but the hours of Googleing gave this info. Everything seems to point to the network VIA USB method profile, which would be perfect if it worked on XP. If there was a simple file I could copy from a master system of its many clones then it works. I could wrap it in one. BAT file or use INNO Script to create a file of configuration etc. Many ways I could do if I could find any files, settings, etc., I would need control.

  It shouldn't be rocket science. I've seen where Microsoft has said they recognize the need for professionals like me to be able to automate this process for any tech user, but then the tools thay do aren't for the professionals that they take away the option of PROFESSIONAL (on-site tech who knows the most, is NOT MS) to decide, using their knowledge intament businesses must make choices about the use or non-use of WEP etc (it's a theme common in MS assistants, just look at the hack job SYSPrep is based by default on the local Administrator profile profile, a MAJOR mistake and a security risk, rendering it useless in a corporate environment where the local Admin profile is preconfigured with options parameters, links, etc. to the things a pro IT does not that the general user to see or to do but they need on the local admin ONLY)

  Thanks for any help you can give.

  Ralph Malph

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads?sort=firstpostdesc

• Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version

  Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
  I know I am running vista 64-bit, it states that in the system properties

  I have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
  32 bit one, I looked in the system properties and it is running vista 64-bit
  Other than a clean install what can I do to improve?
  and if I do a clean install which are the files I need backup so I don't lose my data?

  Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Also make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Computer laptop Windows 8 does not properly connect to 8.1 Win mobile wifi hotspot - connection indicated as 'Limited' (no internet connection)

  Hello

  None of our laptops Win 8 appear to be able to connect to a wifi hotspot (internet sharing enabled, and apart from the wifi on the handset) provided by our Win mobile (Nokia Lumia 635) 8.1, there seems to be a connection between the phone and the laptop, but it is presented as 'Limited' (no internet connection).

  Same phones can provide the internet connection through the internet even setting for laptops Windows 7 without any problem of sharing.

  What additional settings are there to win 8 laptops that require an adjustment?

  Thank you!

  Hi Susanna,.

  Welcome to the Microsoft Community Forum.

  I understand that you are unable to connect your laptop 8 Win to Wi - Fi hotspot. I appreciate your efforts to solve this problem, I'll probably help you with that.

  Check the following Microsoft Help article and if you have activated inhalers of Internet connection on your computer, it will lead to problems of this kind.

  http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-FAQ

  If the problem persists, try the procedure described in the following Microsoft Help article and then check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• intermittent problems / macbook air 2015 250 GB/8 G RAM / Yosemite 10.11.5

  Hello world

  I have intermittent starting problems. Technician at the shop said that it is important to reproduce the problem so that they can provide recommendations for repair. This mac is still under warranty and if I want to do the repair, it must be respected, that is me being left without a computer for a few weeks. I tried several steps to solve and I'm not sure if it has been set of troubleshooting. Please see below for details.

  13 July: tried to turn heard chimes, seen... progress bar on the mac, the computer stops

  • -restart the mac, called logo appears and it stops.
  • -J' tried reset SMC, it was answered, rebooted the mac, apple logo appears and it stops.
  • -WAITED 15 minutes, on the mac, it was completely start-up, but it stops after 10 minutes.

  I went to the Apple repair center, controlling material by staff and it happened, reset the ESCM and LANDAU. For some reason, we couldn't reproduce the problem. It has worked well.

  August 4: turn on the mac, punt managed could connect po... then he froze.

  • -made the hard reset, it fully charged, but it froze when I tried to log in
  • -did the reset once again, he lit. Clicking on my avatar, can you stop
  • – on return, he showed dashes flashing on the left side of the screen

  

  • -a tried to turn it back on, it showed the folder flashing with an exclamation mark.
  • -Restart the mac twice, but it showed the same thing.
  • -For access to the I tried the recovery disk, but it was inaccessible.

  I went to the apple repair center, he showed the foder flashing with an exclamation mark. They tried to test the material (they have connected a cable to test), but the computer has failed. The technician said it's dead. I went home and did not want to send my mac for repair coz I was on a business trip.

  August 5 - tried to turn back, until I did the reset SMC and he responded.

  • -He was able to start successfully, and he was able to log in. 15 minutes later, he stopped.
  • -Fact reset the PRAM and resetting the SMC
  • -in turn, and it has functioned and somehow solved the problem.

  Now August 6, it still works very well, I ran the diagnostic Apple and it didn't find any hardware failure or display errors.

  I don't know what to do. My mac is under warranty, but I couldn't replicate the problem and I'm not sure if it's a hardware or software problem. The technician at the apple Center said that it is better to reproduce the problem and observe the mac. I can't afford to be left without my cell phone. t

  I installed the most recent application is the Vmware fusion (24 May), which is something I rarely use.

  Hi Dabmeister, intermittent problems are difficult to diagnose.

  As a first step, I suggest to use the Combo Update 10.11.6 to replace any system software that is corrupt.

  https://support.Apple.com/downloads/MacOS

  The Combo update is a complete installation, as opposed to an incremental "delta" update, so you have to overwrite all files are damaged or missing. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

• Some applications (Soundcloud, YouTube, Tumblr and Instagram) are not to say that I have a wifi connection when I clearly one. Why is this and how do I solve this problem?

  As I said, some applications are not I have an Internet connection when I do really. YouTube and Instagram both of my loading workflow error messages, Tumblr went to appear in messages on my dashboard at least a week to not show anything on my dashboard and Soundcloud would not load completely. I tried to reset all my default network connections and had to redownload all apps - but who does more, and now I'm stuck being connected on all of them (with the exception of YouTube, which is back to square one (I think)). We are dealing with issues with low storage because of the cloud is all messed up, so maybe she's the one, but I'm not sure. Anyone could try to guide me through fixing this? Thank you

  Hey there dubstepspacecatjr,

  Welcome to the communities of Apple Support! From the sound of things, you experience problems connecting to the internet in specific applications on your iPod touch, such as YouTube and Instagram. You also tried to reset the network settings and reinstall applications, which are key steps in troubleshooting. I can certainly understand the importance of being able to access the internet in order to get most of these applications. I'll be happy to take a look at it with you.

  The first place wherever I would like to first of all is the use of this article:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  https://support.Apple.com/en-us/HT204051

  If you haven't already done so, good insulation should see if this connection within these apps problem persists when you use cellular data. In addition, check that you are able to browse and connect to Safari on your iPod.

  In addition, you do not want to look at the backup and restore of your iPod as a new device. From there, you can reinstall the applications and see if the same thing happens. This will help to rule out existing issues/corruption of software.

  The following items have the steps on how to create a backup in progress, but also to restore your device to factory settings:

  How to back up your device using iCloud or iTunes

  https://support.Apple.com/en-us/HT203977

  How to clear your iOS device and then set up as a new device or restore from backups

  https://support.Apple.com/en-us/HT204686

  Have a great rest of your day!

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Connection Wifi Brighthouse problems

  I always have problems connecting to the messaging with Brighthouse Wifi.  I got my Gmail put in place with other providers of Internet services in other places, but it may take 15-20 minutes to connect with Brighthouse - if it connects to all.  Anyone else having these issues?  All solutions?

  That shows Wireless Diagnostics?

  Wireless diagnosis

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• WiFi driver problem

  I have a laptop Y50 in a few days and I noticed that when I install the drivers for the wifi from the cd provided with the computer WiFi works well but with maximum 72 Mbit connection. When I choose windows to search for drivers more recent it installs latest, the connection goes to 150 Mbps, which is the maximum of my router but with limited connectivity and does not work. I chose to roll back the driver, wifi still works well, but back to 72 Mbps. I tried the drivers from the support section Lenovo that the same problem occurs. I tried the drivers of Intel support page but with the same results. Everything works fine with 72 Mbit connection I get with the old drivers, but I'd really like to do repair and use the full potential of your PC.

  I managed to figure out what was the problem after all, and he was not with the drivers. I use a router Tp-link model 740N stretching on 2.4 Ghz frequency. When I install the latest drivers for the card wi - fi adapter default setting is set to work on 2.4 5.4 Ghz mode or auto. This setting prevents the laptop to connect successfully with the router. I changed it to prefer the 2.4 Ghz band on which my router transmits and the wi - fi on the laptop got working with the maximum 150 Mbps connection between the laptop and the router. So far, works very well.