You are looking for a solution of box text possible 'tabs '.

Similar Questions

• You are looking for a solution for Blue Screen of Death

  I am looking for a solution to a Blue Screen of Death with a Message Stop: 0x0000007F (0 x 0000008, 0x803d3130, 0 x 00000000, 0 x 00000000).

  I use a Lenovo T61 with Vista 32 bit...
  Thank you!!!

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• you are looking for a solution to why my lap top running windows xp running slowly vary

  wanted to update microsoft and he replyed.  I hope you can help

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hi Alby,

  1. who is the antivirus installed on the computer program?

  2 have you installed new hardware or software before the show?

  It seems that Windows update does not work and need to improve the performance of the computer. We will analyze and identify the cause of the problem.

  Method 1:

  I suggest you run the Fixit from the link below and.

  Step 1: Fix the problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Step 2: Also run the FixitWindows system performance.

  Reference:

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  See also:

  Optimize your computer for peak performance

  http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=MZFHXJpbs19

  Hope this information helps. Response with status so that we can help you.

• You are looking for a solution for legacy software installs

  Hello

  I have a desktop PC HP Pavilion p7 - 1467c, here a link to sheet - http://support.hp.com/us-en/document/c03517265

  I had to kind of buy this computer when my original 2006 HP Pavilion Media Center a1340n desktop PC died suddenly and power could not be restored could not find a diet that would be appropriate. Not sure if there was a power surge or what, but whatever it is out of my monitor as well. (If I could get a power supply and check the motherboard I would just keep using that as well since I have an extra monitor)

  Only computers in the city at the time (right at Christmas) have been the version of Windows 8. Trying to install older programs, I'm running into problems and DO NOT have the money to replace all of the following - Photoshop CS2, Paint Shop Pro 9, Poser 5, PhotoImpact 5, Painter 8 and Corel Draw 7.

  What I was asking is possible how is it upgraded to Windows 8 Pro (from now at a discount price), install a Virtual Machine and then install Win XP in my older Pavilion? Can I install Win XP (we have the original CD) of the older computer in this new computer on a virtual machine?

  Thanks for your help

  I was aware of VMWare but did not pursue it since VirtualBox is free for personal use and I found that it met my needs.

  You can compare the specifications of our systems, mine is p7 - 1298c, which as I said is quite similar to your http://support.hp.com/us-en/document/c03421691

  If you don't mind not to reinstall your software, you should probably avoid some frustration of what precedes the conversion of your old hard drive in a virtual machine and just install an activated XP in a virtual machine or possibly use the XP Mode.

  XP mode is a special version of XP Pro OEM, I thought was available for some editions of Windows 7. However, apparently a number of people is running it successfully on VirtualBox and VMWare. Do not test the true Validation of Microsoft from this page http://www.microsoft.com/en-us/download/details.aspx?id=8002 (I did, since IE 64-bit on Windows 8 Pro) to download. A certain file can be extracted using 7-zip and renamed as a virtual hard drive. (First single ' sources/xpm', then treat this file as an archive and extract "VirtualXPVHD" and rename it with the vhd extension). I read that you can use this virtual hard disk in VMPlayer without need of activation.  I checked you can do the same thing in VirtualBox, but after you create the virtual machine, you need another file. Register on the site of vmlite (they will send you an email) and download the attachment to and the instructions in the first post on this page http://www.vmlite.com/index.php?option=com_kunena&Itemid=158&func=view&catid=9&id=6706&limit=6&limitstart=12#8422

  Once the operating system on a virtual machine, you must install the platform integration services. All virtual environments (Virtualbox, VMWare, Hyper-V, etc.) have their own integration services.

  Another thing to know, Adobe removed their activation for CS2 server. To reinstall the CS2 you will need to download special versions which don't require activation. http://www.Adobe.com/downloads/cs2_downloads/index.html

  Please, click on the area of Kudo on the answers that will help you.

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• You are looking for an application unzip the files on iMac

  You are looking for an application unzip the files on iMac. I can find lots of 3rd party applications, but how do I know that they are safe? When I look in the app store, they say for iPhone or iPad can I use one of these?

  THX

  1. There is usually no additional software to do so; Simply double-click the zip in the Finder. If this method does not work for any reason, use The Unarchiver.

  2 No.

  (140768)

• When you are looking for an email or a contact or meeting I get the message "cannot be found" when I know for sure that the article in question is here. I usually resort to trawl through lists of A to z and always find it... helpplease?

  I have loaded all the MS Updates surrent

  Daithi MacSeinichin Hello,

  Welcome to the Microsoft Answers Community!

  You have Windows Search 4.0 installed on your computer?

  Windows Search 4.0 will allow you to search through your contacts, emails, appointments and text documents just to name a few. To access Windows Search 4.0 after installation:

  ·         Click Start

  ·         Click on Search

  ·         To the right of the blue bar at the top, you can click a menu dropdown and search more precisely what type of document you are looking for

  You can download Windows Search 4.0 to:

  Windows Search 4.0

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• You are looking for a free network diagram software

  Hello

  You are looking for a free network diagram software

  Like this program: Edraw network diagram , but it is desirable for free. I want to draw physical Cisco network architecture detailed diagrams. With Cisco models logical network diagrams and drawings of the architecture of our office network (2000 users).

  Good day

  Vania

  Unfortunately, this community forums are for devices Cisco-Linksys (SOHO) home-network. The Cisco Catalyst WS-C4507R unit is managed by the Cisco Small Business support community.

  Please click here for plu answer your concern.

  https://supportforums.Cisco.com/index.jspa

  OnnagokorO

• You are looking for something FedEx

  Separated from this thread.

  you are looking for something fedex November 13

  You'll want to see http://www.fedex.com/us/ to help with that.

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• You are looking for the CSS property in the path of the Charcoal_Grey to change the font size in the sidebar of OCD (ResponsiveHTML5)

  Hello

  It's the same question here for Theme_1 Standard: the response has been

  For this layout:

  Office: div.wTOCTree

  Mobile: div.wTOCNode

  William van Weelden

  I do not have the same properties in one of these places:

  

  Nobody knows what the right properties change for that police smaller TOC for the Charcoal_Grey layout? I'm afraid that if I started fooling around with it I'll do something irreparable. On that note, if I want to copy the entire project so that I do not have a test environment, is there a SAVE as feature of type, I can only see RENAME (my apologies for the 2-iron-1 issue).

  Thank you

  Anne

  Charcoal Grey, you will want to use the SCSS to generate CSS instead. (See; ( Layouts and RoboHelp screen profiles)

  The selection you are looking for is: % TOC-Office-theme3

  Add a font size to this item and it will scale you provide. (Use of measures of the MA for best results. The rest of the content also scales with the help of em.)

• You are looking for a search button to the site of Muse. MuseThemes does not work

  You are looking for a search button to the site of Muse. MuseThemes is not an option, because it requires $70, a one year subscription. I do not code. Muse is working on a search widget?

  Please check the available options:

  http://musewidgets.com/collections/all/search

  Thank you

  Sanjit

• You are looking for a simple auto-upload / sync solution

  Hello!

  Our House is the proud owner of several Apple devices, together, we have 2 MacBooks, 2 iPhone and an iPad. Devices are distributed over more than 2 Apple ID, we want to keep it this way.

  But, as we both take a lot of pictures it is always a hassle to keep track of the best of them so that we are looking for an easy solution. I searched a bit already online but seem to be asking the wrong question, in any case, I can't find what I'm looking for so I'll try here now.

  What we would like to have:

  -Pictures of fact on two iPhones are automatically downloaded / synchronized to one place, wherever we are.

  -This place should ideally be in our House (so preferably not cloud)

  -This place should also be easily accessible from a computer at home so that we can see both the photo when we want and send us some grandmother for example.

  Does anyone have or know a Setup program as described? We are willing to invest and have considered purchasing a Synology appliance for our backups etc already. One of the iPhone is an iPhone 4 which is still ok, so if possible, we would like to keep for a while, the other is an SE. The two MacBook are completely up to date.

  Thanks in advance!

  Maybe you should try Airport Extreme: http://www.apple.com/airport-extreme/

  You can use it to share photos and documents in your home network.