You can connect Apple TV thru or with decoder

Similar Questions

• You can search for your personal library with Siri on the Apple TV and if so, how?

  You can search for your personal library with Siri on the Apple TV and if so, how?

  No, and it's a real shame...

• You can use the new magic keyboard with Apple TV 4Gen?

  You can use the new magic keyboard with Apple TV 4Gen?

  The ATV4 does not support any Bluetooth keyboard. You can use the Apple TV iOS with her application.

• When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect. -Enable yes/no?

  When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect.   -Enable yes/no? When I click on Yes my screen go black and that's it. Nothing happens. I have windows xp professional. For PC refurbished

  Hi Blue85angel,

  ·         What is the number and the model of the computer?

  ·         You did changes to the computer before the show?

  See the following articles in the Microsoft Knowledge Base and check if that helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

   

  Blank page to activate Windows in the wizard of Windows Product Activation

  http://support.Microsoft.com/kb/314935

   

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

   

  You can also contact Activation of Microsoft technical support for assistance:

   

  Activation and registration of a Microsoft product

  http://support.Microsoft.com/kb/326851

  I hope this helps.

• You can connect a 120 Hz monitor to an iMac?

  I know that the iMac 27 in. 5 k runs the refresh rate of 60 Hz, but you can connect a monitor with a different frequency to refresh computer and have no problem?

  Yes.

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• You can save the music from itunes with the sound recorder?

  You can save the music from itunes with the sound recorder?

  The principle is simple in nature, although the tape recorder is not the best option available for you, even in free software for audio recording you can.

  If you want to use sound recorder, you will need to get a 1/8 inch male-male stero (cable basically a helmet with two male ends) and put one of your speakers into your microphone in the port (line in).

  Then open sound recorder and give it a shot. The recorded files will be in .wav format, so you need to get a freeware to convert to program them to .mp3 if necessary. Or use this:

  http://www.media-convert.com/

  You can also use Windows Media Encoder 9, which in my opinion is much better in features and maintaining the quality. It is freely accessible to the public.

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=5691ba02-e496-465a-bba9-b2f1182cdf24&displaylang=en

  You use the same configuration that with tape recorder, get a stereo cable and speaker output connection > microphone.

• You can connect a Mac Mini to a 2 year old iMac?

  You can connect a Mac mini to an older iMac?

  Please define "connect"...

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• por cuando voy a jugar juegos most online don't dice that none is you can connect con el servidor

  Cuando voy ajugar UN jurgo online sell me that none is you can connect con el servidor

  en intentado todo pero no arregla is...
  ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ayuda!!!!!!!!!!!!!!!!

  Hello

  The forum in which you've posted is for English only.
  Please select your language from the drop-down menu at the top of the page to post your question in the language of your choice. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• You can connect a SA520W to an RV082?

  I wanted to know if you can connect a cable modem to a SA520W, then connect a RV082 to the SA520W?

  Hi Joseph, you can do this in several ways.

  • Configure the RV082 on a different LAN subnet then have the DHCP service to port WAN RV082 SA520 (not recommended, it is DOUBLE-NAT
  • Configure the RV082 on the same LAN subnet, disable the DHCP server on the RV082 and lan port of SA520 to the lan of the RV082 port (it is a correct implementation, using the RV082 as a switch)
  • Set up a DMZ on the SA520 then connect the RV082 in to the DMZ of the SA520 (depends on if you want outside access to the reserve unit the RV082 firewall)

  -Tom
  Please evaluate the useful messages

• You can create a table of contents with page numbers using bookmarks?

  You can create a table of contents with page numbers using bookmarks?

  Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.

  If this is not possible from Acrobat, is there a third party app?

  Indeed you have created a script for this - sorry that I missed it. I should have...

  Acrobat - Create TOC bookmarks

• Why all of a sudden I saw me "email address to verify your Apple ID email address must be verified before you can connect. "Please check the address below or choose another address to use as Apple ID" when I try to log in icloud

  Hi all - can anyone help with this?

  I have not changed anything, and when I try to enter my e-mail address Apple ID it tells me 'this e-mail address is already used as an alternate email address. Delete this e-mail from your e-mail address and try again.

  This is my Apple ID no alternate mail.

  I hope that all makes sense.

  Thanks for your help!

  Many people receive messages updating passwords and others. It seems that Apple has been strengthening security. I had to update my Apple ID and then I received messages whenever I logged on other devices to do the same. Then for weeks, then the system is far from ideal. Just this morning iCloud again requested authentication. Unfortunately there is little you can do. If you have an e-mail address, sign in to iCloud with it. If this does not call the Apple Support and let them guide you through it.

  Contact - Support official Apple