You can connect a 120 Hz monitor to an iMac?

Similar Questions

• You can connect a Mac Mini to a 2 year old iMac?

  You can connect a Mac mini to an older iMac?

  Please define "connect"...

• Can my XC-605 can connect to two external monitor.

  Hey, guys. Do you know if XC-605 can connect to the two monitor. One VGA and one DVI. I thank very you much in advance!

  If your model has a discrete video card installed, then the VGA port has been blocked with a plastic cover. The VGA port is not usable when add it on the graphics card is in place because the edge is off.

• You can connect Apple TV thru or with decoder

  Can hang you with an Apple TV cable box at the same time

  Depends on your decoder.

  Apple TV using HDMI.

  If your cable box has a HDMI passthrough you can connect in this way.

  Otherwise, why would you want it to go through the cable box?

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• por cuando voy a jugar juegos most online don't dice that none is you can connect con el servidor

  Cuando voy ajugar UN jurgo online sell me that none is you can connect con el servidor

  en intentado todo pero no arregla is...
  ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ayuda!!!!!!!!!!!!!!!!

  Hello

  The forum in which you've posted is for English only.
  Please select your language from the drop-down menu at the top of the page to post your question in the language of your choice. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect. -Enable yes/no?

  When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect.   -Enable yes/no? When I click on Yes my screen go black and that's it. Nothing happens. I have windows xp professional. For PC refurbished

  Hi Blue85angel,

  ·         What is the number and the model of the computer?

  ·         You did changes to the computer before the show?

  See the following articles in the Microsoft Knowledge Base and check if that helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

   

  Blank page to activate Windows in the wizard of Windows Product Activation

  http://support.Microsoft.com/kb/314935

   

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

   

  You can also contact Activation of Microsoft technical support for assistance:

   

  Activation and registration of a Microsoft product

  http://support.Microsoft.com/kb/326851

  I hope this helps.

• You can connect a SA520W to an RV082?

  I wanted to know if you can connect a cable modem to a SA520W, then connect a RV082 to the SA520W?

  Hi Joseph, you can do this in several ways.

  • Configure the RV082 on a different LAN subnet then have the DHCP service to port WAN RV082 SA520 (not recommended, it is DOUBLE-NAT
  • Configure the RV082 on the same LAN subnet, disable the DHCP server on the RV082 and lan port of SA520 to the lan of the RV082 port (it is a correct implementation, using the RV082 as a switch)
  • Set up a DMZ on the SA520 then connect the RV082 in to the DMZ of the SA520 (depends on if you want outside access to the reserve unit the RV082 firewall)

  -Tom
  Please evaluate the useful messages

• Can I connect a Dell 17 "monitor to my iMac g5?

  Hello!

  I just bought an iMac G5 to an individual on Craigslist with a broken power supply.  I've already replaced the power supply and the computer now works perfectly.  In any case, I have a 17 inch 1440 X 900, Dell display with a VGA connector on the back.  I wonder if I can use the Dell monitor as a secondary monitor (extended desktop) with the iMac.  The iMac has two ports, firewire, 4 USB ports and a port mini screen.  Thanks a lot for your suggestions!

  Yes, you can use it. You will need an adapter cable

  On Apple and cables - video cards Support Apple

• You can print screen a single monitor in a system with multiple monitors?

  Hi all

  In our application, there is a 'Print' button which will take the printscreen and add it to a report. Now that we have improved the system works in several monitors, I could not yet find a way to printscreen only the specified monitor.

  PS. : Normally whenever we do that PrtScr, it will take the image of all the monitors and not a single monitor. Alt + PrtScr print only the active window, but not all windows of this monitor.

  Any suggestion is appreciated.

  Thank you

  Luxama

  Hi George,.

  How do you the printscreen? I think that you simulate a command 'Ctrl + print' and read the image of the cilpboard. I have corrected the AAM?

  Before saving the image to a file you can cut it to the size you need. Sorry, resize was not talk to her.

  Mike

• You can connect two anchor points on a closed path?

  I'm trying to draw a line on one side of one form to another, but I want attached it to each path with anchor points and circulate not only in the illustration. Is this possible?  Is it possible for, say, add anchor points to paths that intersect and then remove the excess?

  Usually, when you add a anchor with the pen tool the next anchor point connects to a line (path) between the two. When I put the tool feather on one traced existing, it adds an anchor point to the path, but I don't know how to connect a line from there to another anchor point?

  Like that, but actually connected to path with anchor points.

  Thank you

  Henri

  You can do however by drawing lines and with some effort, making it a compound path.

  

  BTW, the answer is no, you cannot do it, there is no way to do it in Illustrator.

• Why all of a sudden I saw me "email address to verify your Apple ID email address must be verified before you can connect. "Please check the address below or choose another address to use as Apple ID" when I try to log in icloud

  Hi all - can anyone help with this?

  I have not changed anything, and when I try to enter my e-mail address Apple ID it tells me 'this e-mail address is already used as an alternate email address. Delete this e-mail from your e-mail address and try again.

  This is my Apple ID no alternate mail.

  I hope that all makes sense.

  Thanks for your help!

  Many people receive messages updating passwords and others. It seems that Apple has been strengthening security. I had to update my Apple ID and then I received messages whenever I logged on other devices to do the same. Then for weeks, then the system is far from ideal. Just this morning iCloud again requested authentication. Unfortunately there is little you can do. If you have an e-mail address, sign in to iCloud with it. If this does not call the Apple Support and let them guide you through it.

  Contact - Support official Apple

• SSH version pix 6.3.3 is the name of user pix, you can connect to?

  I test the SSH version 1 connections in a 515 6.3.3 I configuration of usernames within the pix and ssh allows connections via running ip address. THS problem is I can only connect to the PIX via the username "pix" and it will only allow one connection at a time.

  Does anyone know why not accept logings via SSH using user names defined in the device?

  Thanks in advance. Mike

  Enter the commands 'aaa-server protocol LOCAL local' and 'ssh LOCAL console aaa authentication. "

  You will then be able to connect using the local usernames on the Pix.

• You can connect an Xserve RAID to a Mac Pro?

  I have a Mac Pro 1.1 successfully running under OS X El Capitan and OS X Server 5.1.5 and I was wondering if I could communicate an installation of the Xserve to increase productivity as Extra one SAS/NAS configuration if I added a Fibre Channel card or something.

  All this would be for a Mac-based (unofficial) Home Office / small business style setup where I have a few Macbook Pros/Airs data my desktop/Server central

  Basically, I want to know if it would be effective to use any sort of installation of the Xserve

  I've done some research more and I think that if the Mac Pro has a fiber channel card I could connect to an Xserve, but I guess there is a reason not to because if their was not would probably a more common thing