You can use a control with the premier surface / audition?

Similar Questions

• You can swim or shower with the watch

  You can swim or shower with the watch?

  Hello

  Non - Apple advises that you perform one of the people.

  Apple Watch is splash and resistant to water, but it is not waterproof. You can, for example, wear and use Apple Watch during the year, in the rain and all washing their hands. Overwhelming Apple Watch, however, is not recommended. The watch must also be dry if it is wet.

  Apple advises specifically, for example, the following can affect Apple Watch water resistance and should be avoided:

  • Exposing Apple Watch into water under pressure, including under the shower.
  • Swim or bathe with Apple Watch.
  • Overwhelming Apple Watch in water for long periods of time.
  • Apple Watch port in the sauna or the hammam room.

  Water resistance is not a permanent state, and Apple Watch cannot be rechecked or closed for resistance to water.

  More information:

  On the resistance to water Apple Watch - Apple Support

• You can use my Mac with iOS

  You can use my Mac with iOS

  Hello ifixer2,

  Thank you for using communities of Apple Support.

  No, you need two or more Mac computers that meet the following requirements to use Back to My Mac:

  What you'll need

  To configure and use Back to My Mac, you need these things:

  • Two or more Mac computers that use the same account iCloud on OS X Lion v10.7.5 or later version.
  • A Terminal supported access AirPort (AirPort Extreme, AirPort Express or AirPort Time Capsule) or other Internet router that supports UPnP or NAT - PMP protocol, with the latest firmware available. AirPort base stations require version of firmware 7.6.1 or later for Back to My Mac.
  • Utility airPort 6.3 or later.
  • For screen sharing, a 300 Kbits/s-or-more rapid, bidirectional (high-low) Internet connection between computers. You may be able to use with slower connections to share files. If file sharing doesn't work as you think, check your settings and connections.
  • A firewall that allows remote connections. Some firewalls may prevent some back to my Mac connections. For example, when you're at home, don't maybe not able to connect you to your Mac at work. But when you're at work, you might be able to connect to your Mac at home. If you are not sure if the firewall will allow the back to my Mac connections, check with the network administrator for your organization.

  If you want to use an AirPort Extreme or airport Time Capsule to access files on a hard drive external, you need a Mac OS extended (journaled) formatted USB hard drive. When you use with Back to My Mac, your hard drive is displayed as the base under shared in the sidebar station Finder.

  Set up and use Back to My Mac

  Take care.

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html

• Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts? [was: on]

  Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts. Thank you.

  Yes.  No problem.

  [EDIT]  I decided to qualify that.  No problem with forms that come standard with Photoshop, but just about every logo, symbol of the brand, can be downloaded in two vector forms and brush presets.  It would be another story, obviously if you have used this kind of work, but you knew I'm sure.

  

• You can use functions defined by the user in orardf: statement?

  Hello, reading Chapter 5: refined for RDF data access control
  I found this example:
  
  OPTIONAL
  {
  ? control pred: hasContractValue? Val.
  ? control pred: hasManager * ' sys_context ("his $ appctx ', 'app_user_uri') ' ^^ orardf: instruction *.
  }
  
  See the orardf type: statement, I got the question if you can use functions defined by the user in the place where he has used the sys_context?
  
  Thank you.
  
  PD: The translation was made from Spanish to English by using Google Translator

  Hello Alberto,.

  Only the sys_context function is supported. The user-defined functions are not supported.

  Thank you
  Matt

• You can use a Clip in the UILoader?

  You can use a Clip in the UILoader?

  Thanks, rower

  You can load a swf file using the uiloader.  what you trying to do?

• You can use display target with ipad pro?

  I was wondering if I can use my my iMac 27 "as the display of the target using my new 12.9" iPad pro?

  I would use my iPad as a Wacom tablet pro connected to my iMac when you work with my graphics programs.

  Thanks in advance

  target to display https://support.apple.com/en-us/HT204592this works with the Mac

  There are third-party applications that allow you to use an ios device as a second monitor in app store like air show or the stylus from the air and I'm sure a lot of other

• You can use local drive as the mapped drives raw groups

  We have a new host with vShere4U1 installed on a couple of mirrored disks.  The host will initially run a SQL server and the operating system will be SAN (fibre) as all of our other machines are virtual host.  We do not have enough space on the SAN or the budget to upgrade to allow us to run the newspapers/Db SQL, then the host was purchased with an extra 14 discs (much less expensive) who were divided into two disk RAID groups 1 + 0 (410Gb & Go 540)

  I can attach disks locak to the host, but it is shaped as a vmfs and the dbo wants to use these discs as raw as he wants to use the size of the set and is limited to 256GB VMDK in the vmfs.

  Is there a way to present records in vSphere while they give me the opportunity to fix to the virtual machine as raw disks similar to the san, or in any other way.

  I'm a pretty confident user of ESX without being an expert (admin typical average closed sys - too many hats) and basic linux would be appreciate some comments/help.

  Home - HP DL160 G6

  See you soon

  If you remove the data store and then choose a block size, you can have a data store up to 2 TB in a single LUN. If you need you can extend the data to 62 to using extensions store.

  You really want to use raw disks. I don't know if it is possible anyway.

• You can use a flex in the context of an entire web page application?

  Hi all

  Have a quick question. I happens during a flash development background, and I have small flash files that are commonly used as 'part' of a whole web page.  For example, a section of small videos with a flash drive combo box to select the video to play; This swf file would be sized at 600px wide comments by 400px high. Then I just put it in a div tag and add it to my web page.  I'm doing it with flex, but I'm running into issues. It seems that the actual published swf wants to run 100% of the size of the browser window. I tried to adjust these dimensions; first try in flex to the < application > Accessories for height and width, but that has not been around. then tried to just use the file .swf published in the web page and set its properties for < object > to my height and width, which works 'almost' but always falls apart when video player full screen touch.

  So, is it possible to use a flex "app" as part of a web page, or was flex intended to operate on its own and 'no' in the context of a web page? Thanks in advance!

  You can certainly. I usually drop the Flash/Flex application in a div "mainContent" in my larger page structure, so my page should look like this:

  BLA
  BLA

  
  ID = "MyFlashApp" width = "100%" height = "768".
  codebase ="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab" > ".
             
             
             
             
             
  play = "true".
  Loop = "false".
  quality = "high".
  allowScriptAccess = "sameDomain".
  Type = "application/x-shockwave-flash".
  pluginspage ="http://www.adobe.com/go/getflashplayer_fr" >. "
             
     

  Note that I am only using the HTML approach, but the Javascript should work just as well. With the flash set to width = 100% and height = 100%, it will fill the enclosing div, but that's all. So, if you wanted to extend vertically but not horizontally, just set your CSS style to height: 100% and leave width px or em value. Note that the bounding div (that is if you had a wrapper around the NAVs and mainContent div) will also expand/collapse.

  I don't know the impact of the course full screen, if.

• You can use NI 9237 for the LVDT readings

  Dear comrades,

  I wonder if I can use NI 9237 and NI 9945 to get the reading of an LVDT. The interest is to measure the movement using Solartron DC Miniature LVDT.

  In our laboratory, we have NI 9237 and NI 9945 and I would get your advisor if it would be good enough to measure the movement of an LVDT.

  Thanks in advance.

  Hi Gtharm,

  For the Solartron DC Minitature LVDT transducer already includes oscillator, demodulator and filter which alow the sensor to accept the input voltage and provide a DC output from the position. Therefore, instead of using the bridge according to the measure such as the NI 9237 or NI9945 modules, you must only input I take the input voltage.

  The LVDT voltage range would determine which modules HAVE you need to take the measure. Of the specification, you need to at most 100 Hz to get the signal from the probe safely.

  I hope that this help mate.

• You can use video fv to the DVD Format through Windows DVD Maker

  A fv format video is downloadable to dvd through dvd windows creation?

  Hello
  I don't know if you wanted to designate the type of file .flv or fv. In any case.
  Windows DVD maker generally supports these file types:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv
  Audio files: .aif, .aifc, .aiff .asf, .au, .mp2, .mp3, .mpa, .snd, .wav, and .wma
  File Picture: .bmp, DIBs, .emf, .gif, .jfif, .jpe, .jpeg, .jpg, .png, .tif, .tiff and .wmf
  [Please make sure you have the right codecs (audio and video)]
  If you are unable to load your video file in Windows Dvd maker, you can download a free video converter that is very simple from the following link:
  http://www.DVDVideoSoft.com/products/DVD/Free-3GP-video-converter.htm
  With this simple software you can convert your video to AVI video file type that is easily supported by Windows Dvd maker

• You can use variable substitution in the Calc script.

  Hi guys,.

  I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.

  But it gives me error mentioned below by checking the syntax of the calculation script.

  Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type

  Calculation script:

  -----------------------------
  

  FIX (& v_CLEARYEAR, & v_CLEARMON)

  FIX (& v_SECSUBAREA)

  DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),

  @DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))

  CLEARDATA "RESUB."

  ENDFIX;

  ENDFIX;

  ENDFIX;

  Variable substitution:

  ----------------------------------

  PRC

  COR_ALL

  v_SECSUBAREA

  C12.00

  Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.

  Please help me to get this resolved.

  Thank you

  Shruti

  Hello

  Assuming that you calculate in the PRC. Database COR_ALL.

  You may set the C12.00 value in quotes like "C12.00".

  Kind regards

  Philip Hulsebosch.

• You can use Photoshop CC with Crossfire?

  It is not a matter of performance, just a matter of compatibility. I tried upgrading my system of monitors of two 4 k, the system is a Jack-of-all-trades. To play games, work and general use.

  The video card, I only have 1 DP and 1 HDMI 1. 4A port and I can't run the 2nd display at 60 hz. For some reason, it's listen Windows 10. I have my license on board graphics and used the DP for the 2nd screen and Windows works fine, but Photoshop will crash every time that loading with activated GPU acceleration and cards 2 graphics.

  My next option is to buy a 2nd card identical to my current ATI card and use the Display Port on the 2nd card. What I've read, it should work with Photoshop. But it's a hell of a waste of money basically just get a 2nd Display Port access. If I buy another ATI card, I assure you, I can at least make use of the card in the games and run in Crossfire and have no problems with Photoshop.

  Anyone had luck get Crossfire work well with Photoshop CC? I have once again, that I don't really like to run faster Photoshop, just that this is going to work and still provide access to all the new features that are beginning to demand the GPU acceleration.

  Hi CodeMonkeyX

  Please see the discussion below.

  Re: Video RAM and crossfire

  Re: Premiere Pro, Photoshop & graphics in SLI or Crossfire cards

  Hope that helps.

  Kind regards

  ~ Mohit

• You can use a DVD with Apple TV

  Hello;

  Can I connect a USB Super Drive DVD Apple player to my computer and watch a movie on my TV using Apple TV, or should I just connect the USB Super DVD player to one of the TV's USB slots?

  The DVD player will be blocked since mirroring because of copy protection. I do not connect a Superdrive drive to the TV would work, you'd be better to use a DVD player to your TV.