You see landing page views and presentations in the form of a link within the ADC?

Similar Questions

• I do not see my bookmarks toolbar - the gap is there and it is checked in view and presents in the Booksmarks drop, but is invisible (or gone so far to the left that it cannot be obtained to), I think that it happened after I added eBay sidebar for Firefo

  Any help welcome. I tried just restart Firefox and I tried to add bookmarks, but still do not see it.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

  I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

  It shouldn't be a problem. Ultimately, presenter doesn't care what language the audio content is in, he will give all the same. The only problem I could see because of problems would be the appearance of the player. There Spanish lables, but they show only on a computer with the operating system in Spanish. If you want the student to view the two Englishmen and a version in Spanish on the same computer, you may have two versions of the language.xml file where you have one that has the help of English labels in the 'fr' section and the other where it has Spanish labels in the section 'fr '. You would then share those files in and out of the folder located at, C:\Users\ {UserName} \AppData\Local\Adobe\Adobe Presenter\Themes, you must publish a presentation in English or Spanish.

• Difference between variable interface user layout and presentation of the add() method UI?

  Hello

  What is the difference between a variable user interface layout and presentation of the add() method UI?

  Presentation of the variable user interface is something like this:

  var windowResource = "palette {  \
      orientation: 'column', \
      alignChildren: ['fill', 'top'],  \
      preferredSize:[300, 130], \
      text: 'ScriptUI Window - palette',  \
      margins:15, \
      \
      bottomGroup: Group{ \
          cd: Checkbox { text:'Checkbox value', value: true }, \
          cancelButton: Button { text: 'Cancel', properties:{name:'cancel'}, size: [120,24], alignment:['right', 'center'] }, \
          applyButton: Button { text: 'Apply', properties:{name:'ok'}, size: [120,24], alignment:['right', 'center'] }, \
      }\
  }";
  
  var win = new Window(windowResource);
  
  win.show();
  

  presentation of the UI Add() method is something like this:

  var w = new Window('dialog', 'Random Number Generator');
  var btn_group = w.add('group'),
      btn_ok = btn_group.add('button', undefined, 'Ok');
  
  w.show();
  

  Thank you!

  Since the Guide Javascript Tools on the specifications of the resource (you're high example on the page):

  You can create one or more UI both elements by using a resource specification. This specially formatted string provides a simple and compact of the creation of an element, including any container element and its constituent elements. The resource-specification string is passed as a parameter to the constructor function Window() or add().

  The general structure of a resource specification is a specification of item type (for example, dialog box).

  followed by a pair of curly braces surrounding one or more property definitions.

  myResource var = 'dialogue {control_specs} ";

  var myDialog is new window (myResource);.

  The controls are defined as properties in windows and other containers. For each control, give the name of the control class, followed by the properties of the control between braces.

  I had trouble getting the resource specifications to work - probably just didn't make the time to understand. A few differences is that some of the properties that they put in the resource specifications in brackets after the element will not work in the other method, if you do it this way. You normally have to make a second line and add this property. I'm not sure of the first method, but the second is the function object, and you can use the structure of the object (object, nextProperty, etc.) or set a variable to represent the object. In most of the scripts that I write, I use variables and give them a name such as:

  myCheckBox var = dlg.inSomeGroup.add ('checkbox', undefined, "text box '");

  myCheckBox.name = "maCaseACocher";

  By doing this, I can create a recursive function that goes through the entire user interface and retrieves the values of the elements and writes this information to an xml file. Including the names allows the script to identify which variable to control / it is in the xml file, so that it can be reassigned to proper control. I have not tried this with the method of specifications for resources, so I don't know if it will work with it.

• I installed 5.6.2 Pages but all my old documents will open with ' 08 how can I delete the Pages ' 08 and update all the old documents

  I installed 5.6.2 Pages but all my old documents will open with ' 08 v.3.03 How can I remove the Pages ' 08 and update all the old documents

  5 pages is located in your Applications folder.

  Pages ' 08 is located in your Applications/iWork ' 08 folder.

  If you open your old documents Pages ' 08 with 5 Pages it will convert and if not damage, remove a large number of useful features.

  You will probably regret upgrading to 5 Pages which Apple has made extremely inconsistent and keeps changing its file format.

  Peter

• Can you have a video Viewer and photo?

  In Muse widgets allow for the video or photo content but not both together. Is it possible to get an album that scrolls the video and photos in the same area of the image? The video content is taken from YouTube.

  Or is there an existing widget that does this, or a workaround if not? I had a quick glance and I'm not having much luck finding a.

  The light therapy device that works for my photos is attached. I have between 2 and 8 photos in an album. What I want is a viewer that holds two pictures and a video.

  Any help would be great.

  Stein

  Yep, tried my approach simple with not very good a mind. Only to learn myself. I noticed a lot of widget developers looking for things to work on have you tried to ask these people?
  Adobe free model Muse | Widgets and Muse 200 + themes

  Musegain.com

  See Russell Tice can help you DooDadle Adobe Muse Widgets | ClicTrac | Google Analytics widget

  I'd have an event for the video Tracker in Google Analytics using Lightbox display.

• When we organize our emails/landing pages into folders, is there the capacity drag-and - drop?

  Sometimes it does not work always when I record my work and I want to keep my tidy Eloqua platform! I have

  Hi Nathalie,.

  You can drag and drop in the selector (so for example, under the E-mail section, click on "Open an existing email" and opens the selector). If you are looking for in the selector, you will not be able to drag and drop the results of research, but if you want and instead simply navigate through the selector by clicking, you can drag and drop assets into a folder.

  If you want to drag to 'up' in the hierarchy of folders, you can drag the item to the track "Breadcrumb" above the list of files (so if you are in a folder called work in progress, the "breadcrumb" will look like Test-> file Some-> other folder-> current folder), like this:

  

• Toshiba Stor.e TV 1 to mkv and presentations at the info

  Hello world!

  I am interested in the TV Stor.e 1 TB, but I have a doubt about that.

  When I watch a video to mkv with subtitles in srt format on my PC I use a most used worlwide player called VLC. With this drive, I have a video file of .mkv 'name of the film' and "name of the film".srt subs file in the same folder.

  Is it possible to watch videos the same way with tv Toshiba Stor.e mkv or is it necessary to combine the srt file and mkv via an editor of mkv files?

  Thanks in advance for your answer!

  Love & peace

  Hello

  According to this page of specifications of the Toshiba Stor.E TV Stor.E TV supports the
  Video files: ISO, VOB, DAT, AVI, MPG, MP4 (max decoding resolution: 720 x 576);
  Video codec: MPEG 1/2/4, XviD, MJPEG;
  Subtitles: SUB, SMI, SSA;
  http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/TV/

  MKV format does not seem to be supported. You will need to convert it to AVI or other format supported.

• Can you only score one inside and outside in the source window?

  A little embarrassed to ask this as long as I've been using the first, but I have never needed to do before.

  I pull up a clip in the source window, put in and out of the points, and then drag in the timeline.

  Now, if it's a long clip, and I want to take part, how to see new in and out points? It overrides what is already there? Yes, I know that I can test this on mine, but my question is, what do I do if I want to go back and refer to the 'old' in and out of the points? In addition, once they are changed, it changes what I had previously added to the timeline? (I think not because I guess that what I dragged to the timeline will be there, and not update that the new clips are in the source for the same clip window)

  I know there is an option to make a subclip. Is this the only option? If so, I would not even sure how to do this in a workflow. In other words, I should have been the subitem knowing first that I go back and shoot another section of the same sequence. In any case, hope that makes sense and that any idea is appreciated.

  daveAndrade wrote:

  . . . I want to take part, how to see new points and exit?

  You play the clip and the brand new points and exit.

  It overrides what is already there?

  Yes. A clip can have one in and one out point at any point in time.

  ... what should I do if I want to go back and refer to the 'old' in and out of the points?

  Use the button cancel or place markers where you placed your points - you can have as many markers on a clip that you want, or go to the head of the section of the clip you want to go back to who is it on your calendar, select and press the f key, which move the monitor Panel source to this point and add to points that correspond to the clip as it is on the timeline.

  ... once they are changed, it changes what I had previously added to the timeline?

  N °

  I know there is an option to make a subclip. Is this the only option?

  Subclips, using markers, other methods - there are different options depending on how you want to work.

  I wouldn't even be sure how to do this in a workflow. In other words, I should have been the subitem knowing first that I go back and shoot another section of the same sequence

  You can make a subelement at any time. But if you start with a pair of pliers long source you want to extract raw materials, you already know he's going to be multiple-point involved over time on the same element in source.

  MtD

• When you perform queries Smart View Ad hoc, changing the selection of the Alias in the Essbase himself Ribbon

  Hyperion Planning

  GPE, Fusion edition, 11.1.2.2

  Smart View 11.1.2.2

  When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.

  When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times.  He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.

  The option to display the name of the Member is defined on behalf of members only.  (This is the default setting for this option and I usually begin with all the options, by default).

  This problem started after that we went to 11.1.2.2.

  If neither know why the Alias / None change automatically in the Essbase Ribbon?

  Thank you

  Veronica

  There is a way that you can set for your connection

  When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections

  Concerning

  Amarnath

• Pages portrait and landscape in the same document ID?

  I use InDesign CS4 and am certainly not an expert user.  This may sound strange, but I have a need to produce a document that contains both portrait and landscape oriented pages but I'd rather turn the page 90 ° to the right rather than rotate the content of 90 ° to the left so that I'm not craning my neck while working on the content. Is this possible?  If so, how?  Thank you in advance for assistance.

  In the pages Panel, choose the rotation of the spread of the display in the Panel menu.

• 4.0.2 bug - Page export and import of the issues

  When you export an individual page in an environment (for example, a development environment), and then import it into another environment (in this example, the QA environment).
  a. all models associated with this page is lost and you will need to go to edit the page and select Page templates, regions, buttons, elements, etc.
  b. If you import a page of interactive report that already exists in the environment that you import in, registered version of the interactive report that existed for the page are lost.

  Well, in the environment we had, if we HAD a critical bug, we might plan a failure and install the new changes approx. would be low since we had our own house built SSO application... Migrate us app integration, would go through a test script and confirm the app was ready and DBA migrate app all pl/sql code supported production...

  Since they have existed in 3 separate workspaces, we could NOT only copy pages between apps...

  It was a small price to pay for the audit-ability...

  Thank you

  Tony Miller
  Webster, TX

  What happens if you were really stalking a paranoid schizophrenic... They would know?

• fonts in different fonts in Live View and preview of the browser Design view

  My external style sheet has the body defined for a sans serif font and there is nothing to contradict in HTML documents. But while I get sans serif in Design mode (as you know), I get a font serif in Live View and browser preview, not to mention on the Web itself.

  How is this possible (and what I would do to this topic)?

  -Paul

  The problem is in default.css. You have this:

  font: Verdana, Geneva, sans-serif;
  

  The shorthand font property requires a font size. It cannot be only the definitions of the family of police. Change to this:

  font-family: Verdana, Geneva, sans-serif;
  

  Fashion Design is not 100% reliable when it comes to CSS rendering.

• When you are using Pages, how can I enter the page numbers, starting with page 2?

  I'm trying to add pages to a document, but does not include page 1 because that's my cover page. I would like to start with page 2.

  Insert your page number on your cover page. Click on page 2. Then in the toolbar, click Documents, then the Section tab select Hide on the first page of the section and corresponds to the previous section. Your page number disappears on the cover and reappears on page 2 as page 2.

• Code received the error 80004005 When you try to import photos and video from the camera in Windows Live Photo Gallery.

  Spent several hours in technical support with gun tries to resolve to not be able to download pictures from the camera to my Win XP computer.   Usually the computer detects the camera and demand "How would you import pictures?" and the list of shows in one window.   We don't get any list in this window, but only managed to fill the window briefly for WLPG to detect the photos and video, but when we went to import, we received the 8004005 error.   Thereafter, things have regressed, and we're back to not get any answer computer saying that it detects pictures or video - nothing.   But back to square one.

  There are two issues here - likely related: unable to import photos and videos and the 80004005 error.   Who came first and is there cause and effect here, and which way should we go?  Inquiring minds want to know - and being able to import photos and video of the camera Canon Powershot A3100IS again.

  After hours Technical Support Canon was completely blocked and indicated that it was probably an OS problem with my computer.

  Thanks for all your great suggestions.    I finally solve the problem, but I don't know exactly what fixed it.   I ended up running CCleaner (latest version) and make a 'windows', 'applications' and cleaning of "registry".   This needed a re-boot, and when I rebooted, it's when I could finally download the pictures from the camera.    Not exactly what fixed the problem, but there may be here spirits who may be able to say, ' Yes, with blah, blah, blah, you did...» ».

  As far as I know that is a lot of sterile technical support hours and re - install the software and then, finally, runing CCleaner paid off.    I will record your information in case I need it in the future... Thanks again.