You want to read binary files in some parts of the 500th row in the 5 000th row.

Similar Questions

• In Windows 7 when you try to copy files to an external hard drive, getting the error "are you sure you want to copy this file without its properties?

  I know there have been a few posts on this in the past, but I have a slightly different query.

  To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears.
  "Are you sure you want to copy this file without its properties?  The X file has properties that cannot be copied to the new location. »
  After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.
  Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).
  Is anyone able to advise exactly what means the message in terms of properties lost?

  If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.

  It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.

  If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.

  To avoid this problem, format your external drive to use the NTFS system.

  Noel

• Strange behavior when reading binary file

  I'm reading from the binary data as flattened. The file was saved as a class of labview which contained the table of waveforms and other data. When I read the file with read binary file vi with class attached to the type of data the data are correct. But when I read the as flattened data something strange happened (see attached image). The two best shows correct data and two charts below shows the partially correct data. When you write code to read the flattened data I followed the instructions on http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/how_labview_stores_data_in_memory/ and http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/flattened_data/.

  The strange is that there is gap around 1.4 s (marked in red), but the samples before and after game.

  I don't know what I'm doing wrong.

  I have LV2011.

  Demand is also attached.

  

  

  Assuming that you your decoding of binary data is correct (that is, you have the data structure of the serialized class figured out) the problem is probably that you don't the read as binary data, you read in the text using the text file... Modify the read fucntion than binary.

• When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.".

  original title: 'Open with' problem...

  My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• dialog box "Choose the program you want to open this file" is displayed when I start (after shutdown or restart) with my windows username listed in the file to open

  As I mentioned, the dialog box appears after every restart.  It occurs after I entered my credentials to logon and proceeded to windows.  It seems to be pretty late in the boot process that things like the chat programs and widgets are fully charged at the time wherever the dialog box is displayed.

  The dialog box appears to be the 'Open with' dialog box in Windows 7 standard.

  Specifically the dialogue reads as follows:

  Choose the program you want to open this file:
   
  File: Mathew [it's my user id and he showed not extension)

  If I open the file into something like Notepad, then the information below is presented (the # s are real numbers, but these looked like mac addresses, so I left)

  ===========================================================================
  List of the interface
  ##...## ## ## ## ## ## ...... Dell Wireless 1510 Wireless-N WLAN Mini Card
  ##...## ## ## ## ## ## ...... NVIDIA nForce Networking Controller
  #........................... Software Loopback Interface 1
  #... # # # # # # # # Card Microsoft ISATAP
  #... # # # # # # # # Teredo Tunneling Pseudo-Interface
  #... # # # # # # # # Card Microsoft ISATAP #2
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  None
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  None
  Persistent routes:
  None

  Startup in MSCONFIG includes:
  ArcoTray - request for assistance Adobe Acrobat Distiller
  Adobe Reader and Acrobat Manager
  AVG Internet Security
  CyberLink PowerDVD
  Dell Support Center updates
  Reference Dell Webcam Central
  Dell Wireless card wireless network tray Applet WLAND
  Google update
  GoogleTalk
  GrooveMonitor Utility
  Digital Imaging HP - hp all-in-one serious
  HpqSRmon Application
  hpwuSchd Application
  IDT Audio of PC
  iTunes
  Java platform
  Logitech SetPoint
  Microsoft Windows operating system
  Microsoft Windows operating system (Yes, it is listed twice)
  NVIDIA Compatible Windows7 Display driver
  Quicket
  QuickTime
  Synaptics Pointing Device Driver
  TranscodingService

  Samhrutha,

  I solved the problem.

  I found that when creating a new user, no longer had the open with dialog box.

  I started the process of resolution of a corrupted user profile (which seems little more than creating a new and copy and paste a few old values), when I decided to try one last thing.

  I logged on my account corrupted again and when the 'Open with' dialog that I open the file with Notepad.  I tried to "save under" to locate the file and found that it was located in C:\Users.  Something in recent weeks seems to have put a file without an extension, called "Mathew" (my log in name) in this folder, and it began when I started windows.

  I have since deleted the file and am no longer get the "Open with" dialog

  Thanks for your support!
  Carpet

• How to get the do you want to replace these files"dialog box appears in windows 7 (as on xp when cut/copy/paste files)

  I was wondering if there was a way to get windows 7 to look like windows xp then copy and paste files. I don't see the pop-up box asking you 'do you want to replace these files' on 7, I want to see this box and know that 7 will overwrite and copy everything.
  The details of this are, I have a folder with a lot of stuff in there on my desktop windows xp, when I try to copy and paste it on my windows 7 is not to copy and paste all the stuff. I have plenty of hard drive and don't ever see an error message. So why I wonder if the same 7 will overwrite some files. Help, please!

  Hello

  If I understand the question, you want how copy and paste the function works in Windows 7. Please let me know if this is not correct.
  You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.
  I suggest you to see the links and check if it helps.
  Work with files and folders
  http://Windows.Microsoft.com/en-us/Windows7/working-with-files-and-folders
  Copy and paste a file
  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file
  Select multiple files or folders
  http://Windows.Microsoft.com/en-us/Windows7/select-multiple-files-or-folders
  Hope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.

• You want to open old file .hlp in Windows XP.

  You want to open old file .hlp in windows XP.

  Kind regards

  PT1975

  Hello pt1975,

  Thanks for the return of the response.  I suggest a SFC scan to see if something is detected running.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  You are able to open this file from the following steps?

  Hold shift down - right click - select open with - and get
  WINDOWS\System32\winhlp32.exe

  Please let us know status.

  Thank you

  James

• Everytime I open an email or try to send a new message, following the pop box: DOWNLOAD of FILES you want to save this file?

  Everytime I open an email or try to send a new message, following the pop box: DOWNLOAD of FILES you want to save this file?  I have to click 'Cancel' twice in the order fdor the box go away.

  original title: DOWNLOAD the FILE you want to save this file?  Send error message

  Hi Harold Sokyrka,.

  1. When was the last time it was working fine?
  2. Did you the latest changes on the computer?
  3. Are you using any e-mail program or is it access webmail?

  If you use any e-mail program on your computer, then check and make sure that the default e-mail program is set correctly on the computer.

  How to change the default mail Client

  http://support.Microsoft.com/kb/555566

• Trying to open Control Panel files in XP, says "choose the program you want to open this file with.

  do not open files in the Panel or when I open any file the message telling to choose the program you want to open this file

  Hello

  · What is the exact error message that you receive with the error code?

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Follow the methods below:

  Method 1:

  Check the file association, you can see below the link for the steps for the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• Select the program you want to run this file

  my computer keeps asking me to choose the program you want to open this file every time whenever I click on anything and every time that I left the Manager tasks toolbar click open it says C:\Windows\systm32\taskmgr.exe not found Application the only way for me to use the Task Manager is to hit ctrl alt del and when I open it it looks like a lot of stuffs running usually isn't ive run avg a couple of times he only found 1 virus and it contained and I have not found a virus since then any help anyone can give would contribute to

  Hello

  If you suspect a malware please use the methods in the next message.

  Try the system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Its control panel - backup and restore center - left upper repair Windows

  SO which opens also to use the below to execute.

  Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN

  or use start - computer or Windows Explorer to navigate to

  C:\Windows\System32\rstrui.exe

  Top - right click RUN AS ADMIN

  =====================================

  To run a particular program until you get them all back to the normal fair use start - search and
  type the name of the program or the name of the executable file - OR use start - computer or Windows Explorer
  to navigate through the program and run it from there.

  Set your main program associations, and then you can change any type of specific to the right file
  program.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• "Are you sure you want to copy this file without its properties?" what adaptation .jpg files to thumbdrive.

  "Are you sure you want to copy this file without its properties?" what adaptation .jpg files to thumbdrive.

  Hello

  The USB drive is formatted in NTFS (New Technology File System) or FAT32 (File Allocation Table 32)?

  Windows stores the file on NTFS metadata using a feature called Alternate Data Streams. In other words, metadata is stored in an another 'stream' (an object file with a different identity system) as the stream that contains the file data. Since FAT32 does not support ADS, given in these alternative streams cannot be copied and will be lost if you continue copying.

  If you have all the data on the USB, then you can format the drive. If unsaved data then you must back up the data on the USB key on the hard disk of the computer, and then restore it after perform the format.

  Try formatting the USB drive to NTFS and check if the problem persists. To do this, follow these steps.

  a. Insert the key USB and go menu start, then computer.

  b. right-click on the USB key, and then click Format.

  c. under "File System", select "NTFS" and then click Start. Once the format is done, check if you can copy the files successfully.

  I hope this helps.

• Warning message to turn off "Are you sure that you want to copy this file/folder without its properties" message during the transfer of files and folders on network file servers? »

  Original title: Annoying message of loss of property

  Win7pro x 64 here.

  Is there a way to disable this annoying message "Are you sure you want to copy this file/folder without its properties" during the transfer of files and folders in all of network file servers?

  Pokermon salvation,

  It would be better if post you this question in the forum category below where this problem is related to Windows server 2003.

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  If all goes well, they will be able to solve this problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DISABLE 'Are you sure you want to copy this file/folder without its property' without formatting the drive to NTFS

  I have several WIN7 SP1 teacher workstation via SMB connection to an OS X Server 10.8.3.  When copy files I get the following warning "are you sure you want to copy this file/folder without its properties.

  I don't have the option to format the location of the copy in NTFS.  The OS X 10.8.3 server must have the disks formatted HFS +.
  How can I disable this setting in custody or thing WIN7?  There must be a method as another server, I have does not have this warning on WIN7 machines.  My another server running Server OS X 10.6.8.  I have not received this warning when copying files using WIN7 OS x 10.6.8 Server.
  I searched extensively, but have yet to see a response that does not formatting of the location of the copy in NTFS.
  TIA.
  M

  Hi Tia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• "are you sure that you want to move this file without its properties.

  Hello

  I'm trying to transfer .avi files from my computer to my external hard drive.

  However, I get the following message trying to copy: "are you sure you want to move this file without its properties?" and when I press 'Yes', the file is copied, but it is not my external hard drive.

  I also tried to copy the files to a flash drive and it says that the files are corrupted when I try to play them on my playstation.

  How can I copy the files successfully on my external hard drive?

  Thank you

  Copy all the data from the USB STICK to your hard drive, open the computer management go to disk management, select theformat USB flash drive and select format drive to NTFS. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• given that I uninstalled google chrome, I get this "choose the program you want to open this file" on outlook

  Windows 7

  Hello

  Outlook using Google Chrome as default web browser to open the files of Outlook. Now that you have uninstalled Google Chrome, the file you are trying to open Outlook is you inviting them to choose the program you want to open this file.

  I suggest you choose a program (for example, Internet Explorer) as a default to open files.  Refer to this article:

  Change the programs that Windows uses by defaul
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default