You want to write an article on an Air of iOS development. Where to post?

Similar Questions

• I have Photoshop CS5.1 on my Mac now and you want to transfer to my Mac Book Air newly purchased. How can I do?

  I have Photoshop CS5.1 on my Mac now and you want to transfer to my Mac Book Air newly purchased. How can I do?

  Just install it like you did the first time (do not try to transfer from the old machine somehow) - you can download it through your account if you bought for download originally - otherwise, there is a link to download below. Your serial number should be available through your so into account your registered Adobe software previously.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  If you want, you can leave it on the first machine as a backup because you are allowed to have two active facilities.  If you want to remove from the older machine you should first turn it off (open an application and choose Help-> Deactivate).

• My phone I are fixed.  I found an old I phone 4 (I think) and you want to turn it on while my other is being developed.  What should I do?  Call Verizon?  Or y at - it is something I can do at home to reactivate with my current number.

  My I - Phone 6 is being repaired.  I found an old i-phone to the draw which I believe is a 4 and you want to reactivate with my current phone number whild I am without phone.  Should I call Verizon?  Or is there a way I can activate it here at home?

  If the device is unlocked, insert the SIM card into the device and you're good to go.

  If the device is not unlocked, you will need to contact the original carrier and make them unlocked, so you can use any SIM inside.

  Also, you will need adapter because the iPhone 6 uses a different map size 4

• How do you want to give other users access to the Mode to develop Admin?

  Hi - I can see the tab 'develop' when I connect to the my sites, but other users Admin can not. Does anyone know how to change this?

  Thank you!

  Sorry guys... but I forgot to ask.  Are these users non-partner? The "develop" button is visible for users of partner.  There is no work around at this point.  If indeed a partner user and the button does not appear, then it would be a problem.

  -Sidney

• When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• you want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. A

  I want to send data using labVIEW to arduino using write visa and the process and to take action using arduino. After that, I want to arduino to send out necessary via a serial port to labVIEW which should be read using visa read and store in a chain. While I am able to write or read both individually, I can't do it consecutively. I used advanced read and write vi for checking my code, but nothing is helping. The wrong bed 'time delay before execution. " Please let me know where I can go wrong. Also is it possible to write code for hx711 using labVIEW

  1. you need not "\n" on your orders println().  This command adds an end of line character already in the message.

  2. you get the error because you have a loop around your reading.  After the first reading (well technically, the second because of you add an extra line end character), there is nothing left in the port.  As a result, you will get the timeout.

  3. you should really consider using a Structure of the event.  This way you just don't write and read when you press the Write button and you can also use the structure of the event to make the loop to stop.  I also go up to close the port inside the stop-> value Change event.

  

• I have a memory card reader/writer. You want to know what it takes to put photos on card

  I have a video photo frame that I put my memory card in to see photos. but cannot modify them. so I bought a card reader/writer, I have used before and had no problem. but didn't write what I did. now, I don't know how to recover my pictures on the computer to the memory card.

  If you insert the memory card into the reader and go to...
  Start / computer... you will find one or more removable
  Discs that represent the slots in the card reader.

  For example...

  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  Once you learn which represents removable disk
  the card slot is in you can copy and paste or drag and drop
  photos on the drive letter that you want to copy on the map. If
  you get to pictures in your folder images, you can
  Right-click on a group of photos or a folder and the
  menu choose... Send to / removable disk (? :))...)

  Tip: There is a limited number of files can be copied
  in the memory card root directory. You can see a
  error, something like:

  "Impossible to copy the XXXX: failed to create the directory or file.

  You can avoid this problem by placing the files in folders
  on the map.

• I just want to write a document! As in Vista, he was Manager of the tasks where you have written letters and calendars?

  I want to write a document, and where is the tab assesories with Notepad and all these things? You know where the Start button and there is a long list of everything? Where is it?

  Hi Kendra if you want to use WordPad or Notepad, to just start screen type WordPad, Notepad and click on it, then WordPad or Notepad opens.

  On the start screen you can search for anything within windows 8, just type and see.

  I don't know what programs you had with Vista.

• Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Hi Dennis,

  Acrobat CC is not compatible with MS Office 2003 and currently, we only sell Acrobat DC. However, if you opt for a subscription of Acrobat DC you can install and use Acrobat XI that is compatible with Office 2003, but only to a certain update.

  Please check details of compatibility here: web browsers and applications of PDFMaker

  Thank you

  Abhishek

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• You want to implement the master password. Instructions say go to the window/button firefox, options, tools, options, etc. I don't have these buttons on Firefox. ?

  attempt to set the password according to the instructions on your Web site; However, I do not think that I have a toolbar that you want to use. Who can I load on. I don't want to put on one that doesn't really work.

  In the left column of the article, under editing tools, you can select your version of Firefox and Windows, where you followed a link code for an older version. For Windows 7 + Firefox 40:

  https://support.Mozilla.org/KB/use-master-password-protect-stored-logins#Firefox:Win7:FX40

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I want to write full khmer unicode in imovie. What I can?

  Dear apple supports,

  I want to write khmer unicode full with mac os and I use with iMovie create movies. What I can?

  Have you tried?  OS X comes with Khmer unicode keyboards and fonts.  How they work well in iMovie, you'd have to test.

• Cannot find view in the Application settings. You want to control the brightness.

  "Control the brightness of the screen on Firefox OS
  How can I control brightness manually or automatically?

  Adjust the brightness of the display using the display function in the settings app.

     Tap the Settings app and choose Display."
  

  Above are instructions for controlling the brightness in Foxfire. The settings application appears under Options and does ' t have display. I looking in the wrong place?

  Hi TheWeav, the article you mentioned is for the new phones of filed. Is your question about one of those or Firefox on your Windows XP system?

  Versions of Firefox for desktop computers do not have a brightness adjustment. You can adjust the brightness of your display using the global setting for Windows, which may include some special on your keyboard function keys or a Windows Control Panel.

  If you want only to adjust the brightness of the pages in Firefox - to moderate the white backgrounds, for example - you could try an add-on.

  • In this thread, the NoSquint extension suggested: How to change the brightness.
  • Several independently developed modules are marked with the keyword 'brightness' and might be worth a review: https://addons.mozilla.org/firefox/tag/brightness?platform=windows

  You can find a good solution?

• You want good answers? Ask good Questions.

  Here are some tips to get the best answers in the forum:

  Search before you post using the 'Search' box to see if someone has already asked and answered your question.  If you want drivers Start here on the HP site and enter your model number, then the operating system.  Similarly, there are pages troubleshooting for many of the most common questions.  Start at the same link in which case the pilots, but click on the link "Solving a problem" after you enter your product number.

  Use the Forum, do not send this way others can contribute to and benefit from the answers.

  Write good titles offered a description of the short problem and your printer model in the title.  A title such as "Cartridge in Officejet 7410 error" will be more likely to get a response than a title like "cannot print".

  Provide details remember to provide relevant information, including:

  • Description of the problem
  • Printer model
  • Operating system (including service pack revision)
  • Method - USB, LAN, Wireless cable connection?
  • Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  Watch for your comments subscribe to updates to your issue by e-mail and/or check your question frequently for responses.  Respond quickly to any request for further information. If you're having trouble finding your questions, you can connect, then click on your username at the top left.  This will bring you to a page that will show you your stats, including your messages.

  Be Patient please be aware that this forum is a peer to peer support forum, it's not a direct link to HP support. People here are for the most part voluntary, answering the questions on their time.   If you do not get a response within a reasonable time (a day or two) do not repost your question or post a "bump".  Re-read your original post and if there is more details you can provide, then write a follow-up post in the original thread.

  Say 'Thank you' when you get an answer to your problem of recognizes the solution.  If the answer is useful mark with "Congratulations" by clicking on the button of congratulations.  If your issue is resolved then mark it as resolved using the button "accept as a Solution.  This will help others to solve similar problems.  Accept that the Solution is available to the poster of the original question in a thread.  Congratulations button can be clicked to all messages that will be useful.

  Hello

  Very good suggestion. I floated it to the top of the son so that he will be on top.

  Park