Bars that overlap in XY graph
Hello
I'm plotting bars in a XY Chart.
If the values of X are not in ascending order, the bars are overlapping. Bars are overlapping, if X values are in ascending order.
Is there something that bad? If some can confirm this? Is this a bug?
With the help of LV 13.0.1f2 (32 bit)
Concerning
UliB
It is the expected behavior. The width of the bars is calculated according to the current and previous point. So if your points are in different orders, you get different size bars, since the calculation of the width of each bar will be different. The bars are calculated, such as the current and previous bars do not overlap, so if your X values are strictly increasing, so no overlap, but if you have some values of X that are out of use, the bars will be overlap probably.
Tags: NI Software
Similar Questions
-
When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?
Could you check this thread started by another user of Linux and see if that helps:
-
How can I put the bar that held my go-to site icons?
I am referring to the bar at the address of the site and Google box. In the past, I put a lot of icons on this bar, that I got from my Bank, utility bills, mail, facebook sites, etc.. It was a great convenience. The bar was a sign as well, to add other icons. A window will appear, which allowed to choose an icon and enter the address of the site. Many sites had their own icons, which appear automatically in the window. Now, I tried to follow the directions to add icons to the bar, but it seems that there is very little available and virtually none that I use. I hope that there is a way that can be used to add the capacity bar place very helpful icons, which were so easy to use. I'm sure that many people are also upset. It's a mystery how anyone could think that the new features would be better than the former, at least for the usefulness of this one bar. Thank you, in advance, for your help.
- Right-click on a zone empty of the tab bar and select Customize.
- Click Show / hide toolbars button near the bottom and make sure that 'Personal bar' is enabled.
- Make sure the "Bookmarks Toolbar Items" element is on the personal bar (the bar below the navigation bar, which is the part with the address bar and the search box).
- Click on the button customize exit down to the right when finished.
- When you want to bookmark the current page, simply drag the icon on the left side of the bar (usually a globe or a padlock) address on the bookmarks toolbar.
Bookmarks Toolbar - See your favorite websites at the top of the Firefox window
-
Settings of records that overlap do not work
When I call my settings of the duplication of records, they are all "replace". I choose another option in the menus, but they do not. I can not any setting other than "replace". This is true for MIDI and Audio settings.
Everything else in the dialog box (boxes and count the settings seem to work well. Does anyone else have this problem? I tried to restart my computer and logic, without success. I'm running Logic Pro X 10.2.3 on an iMac 27 "mid-2011.
Any ideas? Really miss me my records to take.
OK, set it to 'Create a folder take' to create a folder to take.
Overlap simply writes a new region that overlaps exist areas, it does not have a folder to take.
-
for some reason any bar that has firefox and a down arrow left and I would like to get it back
for some reason any bar that says firefox with an arrow down on the top browsers disappeared and I don't want to return
I fixed it
-
How to restore the information bar that shows the prevention of opening a pop-up window?
After Firefox open the InfoBar telling me they have blocked a pop-up window I inadvertently clicked on the link option and delete the new coming information bar.
How to restore the information bar that shows the prevention of opening a pop-up window?This has happened
Just once or twice
== I clicked on the link to the option and select the option "do not show this again."
I put browser.popups.showPopupBlocker false, and always appears in the information bar.
When I also set privacy.popups.showBrowserMessage to false, it does not appear.
I use to check, if the info bar is displayed,
http://www.PopupTest.com/popuptest3.htmlSo, the value of the real preferences
privacy.popups.showBrowserMessage
and
browser.popups.showPopupBlocker
Two of them!
This help you?
-
Remove particles that overlap?
I'm looking for an effective way remove the my binary image that overlap.
Image 1 is the current seuillee image
Image 2 are the particles that are bad
Image 3 is the combination of image 1 and image 2
I want to remove particles that are 'overlap '.
Effective ideas?
Thank you
Branson
PS Images are in binary form, you must open in IMAQ to see.
Red = binary value 1
Green = binary value 2
Blue = binary value 3
Hello
I guess you try to do a binary reconstruction, have a look at the Reconstruction of binary morphology IMAQ: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_binarymorphology_reconstruction/
Stimulate the function with your 'bad image' as a brand.
Hope this helps
Concerning
-
Replace from the Clipboard, or "connect the wires that overlap?
I'll go by many of my first diagrams and clean code
with things I've learned since I started using Labview. A lot of this involves deleting
objects, then copy/paste of a conception of good reference in the old design. However,.
This often leaves a large number of broken wires to clean. For example, where I had individual
enumerations that are used in the design, I am replacing them with typedef enumerations.
(I couldn't typedef controls to appear in my palette of functions, but it is a question
for another post)
As it seems to be my only choice ' replace-> select a VI-> [file .llb]->-> [OK] typedef.
or remove the old one, paste a new, ctrl-B and rewire. This second option seems
to go faster than the first. But in both cases, there is a lot of click and drag to replace a
control, and there are dozens of them to do.
Therefore the routing of the wires is the same, but it takes time to connect them all back.
Is it possible to tell LV "re - connect the broken wires that overlap the pins."
overall or in a given area?
Or y at - it a way to simply "replace from the Clipboard?
Thank you and best regards,
-- J.
If you do a find > anyway, the dialog box that opens has a button replace. After selecting the replacement, one of the options is to replace all. This should save time if you have multiple copies of the original constants or controls made from the control.
Lynn
-
Original title: the task bar icons
Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working. Can I get a virtual device driver format in the registry is incorrect when you use a disk with the drivers on this subject. I found information on how to correct this problem and now the botton of task bar work again although it works until the computer is used for a while. How is the hidden icon button suppose to work or it should be visible all the time? Also the virtual device driver registry entry has something to do with it? I think that the problem of the DMV has installed a Norton program antivirus software that was on a disc that came with the computer.
Hello
1 have had any changes made to your computer before this problem?
I suggest you try the methods mentioned below and check if it helps:
Method 1:
You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this information is useful.
-
my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.
Hello
As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.
http://support.Microsoft.com/kb/310353
If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: updates
I am running vista home top and I can't seem to make the updates I have a message on my task bar that says windows cannot check the updates...
Hello
Microsoft still provides updates of Windows security until April 2017, but only for Vista SP2
This is what covers the Extended Support.
https://support.Microsoft.com/en-AU/lifecycle#GP/lifePolicy
___________________________________________
Check to see if both SPS is installed:
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
See you soon.
-
So I know that vista comes with cmdlets and Gadgets Sidebar and toolbar quick launch in low next to the button start. Mine also came with this bar that resembled a type of "Favorites" bar, but I don't know what it was called. You can move from top, bottom, left or right of the screen and put a shortened desired in this regard. You can change the color of it and everything. I've loaded ZoneAlarm and AVG and now the "toolbar" (even once, don't know the name) disappeared. Anyone know how to get it back? Thank you very much
If it is above > look in the start menu > programs > software Dell > Dell Dock > or re-download.
If another brand computer > look in their software > under start > programs.
See you soon.
Mick Murphy - Microsoft partner
-
How to restore the 'details' bar that shows the metadata of the files?
At the bottom of the Windows Explorer window, there is usually a bar that displays data from all of the files selected, such as name, size, year, title, etc.. It is called 'bar details' or 'window details '. Once I clicked on this bar and chose to disappear, I couldn't find how to restore.
I looked in the control panel and in the options folder, but in vain.
I need to know which option and where is responsible for the restoration of this facility. It is very important to me and if anyone could help me I would appreciate it.
Hello
Start - computer or Windows Explorer - click on organize - Layout - pane
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
StackLayout works do not (children that overlap)
I'm trying to use the StackLayout in AIR BB10 application for the first time and things are not stacked.
Example code:
package { import flash.display.Sprite; import qnx.fuse.ui.dialog.AlertDialog; import qnx.fuse.ui.text.Label; import flash.events.Event; import qnx.fuse.ui.text.TextFormat; import qnx.fuse.ui.core.*; import qnx.fuse.ui.layouts.stackLayout.*; import qnx.fuse.ui.listClasses.*; [SWF(width="768", height="1280", backgroundColor="#000000", frameRate="60")] public class Example extends Sprite { private var label1:Label = new Label(); private var label2:Label = new Label(); public function Example() { try { init(); } catch(error:Error) { dialog("Error on Initialization", error.message); } } private function init():void { var container : Container = new Container(); container.setActualSize(stage.stageWidth, stage.stageHeight); container.scrollDirection = ScrollDirection.VERTICAL; var layout : StackLayout = new StackLayout(); layout.padding = 25; container.layout = layout; addChild(container); var myFormat:TextFormat = new qnx.fuse.ui.text.TextFormat(); myFormat.bold = true; myFormat.size = 50; myFormat.color = 0xFFFFFF; myFormat.font = "Slate Pro"; label1.text = "A"; label1.format = myFormat; label1.validateNow(); label1.height = label1.textHeight; label1.width = label1.textWidth; container.addChild(label1); label2.text = "B"; label2.format = myFormat; label2.validateNow(); label2.height = label2.textHeight; label2.width = label2.textWidth; container.addChild(label2); } private function debug(msg:String):void { dialog("Debug", msg); } private function dialog(title:String, msg:String):void { var alert:AlertDialog = new AlertDialog(); alert.title = title; alert.message = msg; alert.addButton("Ok"); alert.show(); } } }
The labels 'A' and 'B' overlap in the upper left corner.
"The
StackLayout
class organizes controls in a pile that overlap, where the stack is defined by the control hierarchy."Well, this explains why.
Why the Cascades StackLayout work go and AIR StackLayout work otherwise?
The Cascades class organizes things horizontally or vertically.
Sigh.
-
Traffic that overlap on the device with the power of fire
Hello world
How should I handle the traffic that overlap on the device of firepower?
I am inspection 2 VLANS using switches virtual, one VLAN is my edge of the internet and the other VLAN is my internal servers VLAN.
Sometimes my internal servers to THAT VLAN needs access to internet and that traffic is superimposed on the inspection of my internet edge VLAN.
Is there a configuration to avoid connections between connected/inspected twice?
Thank you
Hello
You can create rule of the trust with areas / vlan specific or IP source/destination if you want a specific traffic does not inspect.
Maybe you are looking for
-
"windows cannot check for updates ' and my automatic update is on
* Title *.My computer says "windows cannot check for updates ' and my automatic update is on. Can someone help me with this problem?
-
URGENT PROBLEMA PARA ACABAR EL PROYECTO
Muy buenas: Tengo a problema in el programa Québec he hecho ayudandome of different programs and there came y me gustaria saber como puedo change el valor al PANEL_STRING_LENGTH mi programa porque aunque lo he have changed fr the extension .uir al fi
-
HII there, I bought a RE6500 rande Extender and wireless network has not automatically shown as the instructions, he will say. Ive tried following th online PDF instructions under "Basic settings" and have connected it, so when I go on 'Wireless' und
-
Como hago para enable the playback of videos y musica in internet
No I do not replicate the videos nor any musica to funcion deshabilte como hago para reestablecerlo...
-
Can not download the update to LR 5A
I tried several times to download the update for LR 5 but whenever it stops before it is completed. Does anyone else have this problem?