you will need to disable remote...

Similar Questions

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• You will need to disable private browsing window/private on our work computers, mac and pc?

  I support the Mac and PC version 26 Firefox on all machines. I need to disable the private window and private browsing, including keyboard shortcuts.

  If you hide the menu items and buttons with userChrome.css code so the menu shortcuts will still work.
  
  You can only disable the shortcuts with an extension.

  See also:

  • http://Mike.kaply.com/2013/02/11/Add-ons-in-the-distribution-directory/
  • http://Mike.kaply.com/2012/02/09/integrating-Add-ons-into-Firefox/

• You will need to disable the software during the upgrade to Windows?

  I've been using Photoshop CS5 in Windows 7, and now I'm going to do a new install of the Windows 10 operating system on my computer.

  Do I have to disable Photoshop before you install the new Windows so I don't lose use of the license? Or it will recognize my computer, even if the operating system has changed?

  Thank you!

  Always disable it... a cleaning disc and install average cost is a new computer

• You will need to disable the blocking of "this connection is untrusted.

  I don't know what happened, but lately, Firefox has become unusable. I can't even Google maps to work, and it's simply because of the following warning:

  =

  This connection is Untrusted

  You asked Firefox to connect safely to maps.google.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  If you understand what is happening, you can tell Firefox to start to trust this site identification. Even if you trust the site, this error may mean that someone is tampering with your connection.

  Add no exceptions unless you know there is a good reason why this site uses no identification of confidence.

  =

  Not reliable? REALLY? Maps.Google.com is not approved! Oh, and support.mozilla.org is ALSO not reliable? I use Chrome for this post because in the case of support.mozilla.org, there is no option that allows me to the site.

  Virtually all the sites that I have this problem and Firefox is now all but unusable for me. And I'm on a company computer, is not as if I had a lot of options here. And this isn't our business network, because only a few of us have this problem.

  How can I work again and disable this 'feature' of Firefox?

  Thank you

  Unfortunately, fiddler2 certificates issuer may be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
  
  _{Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145}

  afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• Help, please! You will need to disable mobile web! (Rival A455)

  I have the Rival A455

  So 4 months is spent by the and each month I pay $ 2 extra on my Bill of 1 mb of data usage... I suppose that at some point every month I hit accidentally mobile web or one other option that uses the data... OR VERIZON IS RIPPING ME OFF!

  I argued twice now with Verizon on the phone and they refuse to withdraw the Bill.

  well want to can someone help me turn off the features of data or at least disable mobile web to prevent accidentally clicking on it?

  It would be greatly appreciated.

  BubbaJoe,

  You can disable the use of data on your phone and avoid charges by logging into your account on the website of Verizon Wireless. You can control what services you be charged. Just keep in mind that this will affect anything that uses data, such as downloading ring tones and games.

• White space to the right of the mobile Muse Web site. You will need to disable horizontal scrolling?

  Here is my temporary site:

  Home

  After having tried the codes below, the problem appeared to be fixed (browser). However, problem still happens when viewing on the mobile device or preview with x-code iphone Simulator.

  I tried the following:

  • No selection of all to ensure that no stray objects / elements are outside the page.
  • Cache - everything on the page (so that only master remains). Problem still there. It's not there when only master published.
  • Using this code(on both object and property of the master page and main html page):

  < style >

  HTML {overflow-x: hidden ;}}

  < / style >

  • Using this code (on both object and property of the master page and main html page):

  < name meta = "viewport" content = "width = device-width, scalable user = no" / > "

  Any ideas?

  Looks OK on an iPhone 6. Such problems often occur if page items extend beyond the page area. Another thing to check is if this occurs if you disable the Gallery widget you use. Due to their nature, the code used in the widgets sometimes conflicts with own Muse code, particularly if you use sensitive design with older widgets.

  

  David

  Creative muse

• You will need to disable your laptop has crashed, but how?

  My Macbook Air appears to be dead.

  So, how can I disable it?

  I found nothing for the moment.

  Contact Adobe technical support via chat and ask them to reset your activations

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Firefox (15) inserts a "Firefox HTML document" in the Windows Explorer file &gt; new menu. It breaks my work bosses (Alt-FWF stops working). You will need to disable.

  I often use the shortcut Alt-FWF to create new directories under Windows.

  When 15 FF is set as default it modifies the file menu from Windows Explorer.

  She inserts an element "Firefox HTML document".

  This point seems to sabotage the above key combination. He intercepted the last f.

  In addition, I object to the name that is simply not true, for me.

  I deleted the registry key that inserts this thing. Unfortunately it appears again.

  I want to stop this behavior.

  How to kill it. (Other than by a different default browser.)

  I see, you have created an order C:\windows\shellnew for .htm files.

  Poking around for where the description could come... Have you tried to rename (by default) or FriendlyTypeName under:

  HKEY_CLASSES_ROOT\FirefoxHTML

  to see if it works? And if so, how long it sticks?

• You will need to disable the automatic connection when I launch Skype.

  When I run Skype (using windows 7) there was to be a box to check connect automatically when I launch Skype or not, this box is now gone and randomly, she sign me automatilly or request my password.
  
  I still want to ask me my password - if it is possible I would like to also forget my username without having me clear the record in the appdata folder every time...

  So, I can easily leave Skype and if someone else is trying to boot from my computer, they don't see any of my data.
  
  But I need to at least ask me my password.

  Open tools-> Options-> General settings. Uncheck the option: ' Sign me in Skype on startup. Save options.

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop

• You will need to disable CS 5.5 Design Suite with 2 broken computers.

  How can I contact customer service to do this?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• You will need to disable a computer. Can not find disable in the help section

  You can use PSE 13 on another computer. In the old computer in Photoshop elements 13, in the upper left corner, help,does not show an off button. What to do?

  davidp67511823 wrote:

  Hello.  In the same menu help, nor is it a logout option. What should do?

  You are in the editor or organizer?

  Are you on Windows or Mac, which version?

• Siri keeps saying "I don't see an app for that.  You will need to download one. »

  I just installed Sierra and tried to use Siri.  I can't open any app on my Mac.  No matter when I say something like, "FaceTime open" or "Open Pages," Siri comes back with something like "I don't see an app for that.  "You will need to download a ' or 'you don't seem to have an app called 'Pages'.  We could see if the App Store has it. »

  Hmmm... This is not sensible.

  You need to speak clearly. I had the same thing happen. It took a few tries but Siri has finally opened apps for me.

  Practice support

• You will need to check on a PC with WinXP OpSys PUP. Could DO with Win98 and earlier versions. HOW can I make WinXP let me control BACK Pup?

  You will need to check on a PC with WinXP OpSys PUP.  Could DO with Win98 and earlier versions.  HOW can I make WinXP let me control BACK PUP?   Acquired CNC machines controlled by PRE - Win.XP PC works fine.  But Win.XP prevents the PUPPY control via simple BACK and GWBASIC.   You want to be able to start/stop all 8 bits of data PUP with BASE and BACK.

  Thank you.   Jan Rowland

  Hey Jan Rowland,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited in the Windows XP Pro on the Technet Forums.

  Post your query in Technet Windows XP IT Pro Forums for assistance on this issue.