You will need to disable the blocking of "this connection is untrusted.

Similar Questions

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• You will need to disable the software during the upgrade to Windows?

  I've been using Photoshop CS5 in Windows 7, and now I'm going to do a new install of the Windows 10 operating system on my computer.

  Do I have to disable Photoshop before you install the new Windows so I don't lose use of the license? Or it will recognize my computer, even if the operating system has changed?

  Thank you!

  Always disable it... a cleaning disc and install average cost is a new computer

• You will need to disable the automatic connection when I launch Skype.

  When I run Skype (using windows 7) there was to be a box to check connect automatically when I launch Skype or not, this box is now gone and randomly, she sign me automatilly or request my password.
  
  I still want to ask me my password - if it is possible I would like to also forget my username without having me clear the record in the appdata folder every time...

  So, I can easily leave Skype and if someone else is trying to boot from my computer, they don't see any of my data.
  
  But I need to at least ask me my password.

  Open tools-> Options-> General settings. Uncheck the option: ' Sign me in Skype on startup. Save options.

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

  I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

  Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

  With the permission of Jeffrey Tranberry

• What should I do if I need to disable the block add but I need it desperately for Youtube?

  I got a warning on my Tumblr, saying I have to disable an extension for all of the Add-ons on Xensemble to work properly. The problem is that I really want to disable the block add that it is so helpful and I really need. Is there another way to get xensemble to work, but with block adds still in use?

  You can create a filter to not enable Adblock Plus on tumblr, which should avoid this.

  You also need to update Firefox 37.0.1, the version you are using is very ancient.

• You will need to disable private browsing window/private on our work computers, mac and pc?

  I support the Mac and PC version 26 Firefox on all machines. I need to disable the private window and private browsing, including keyboard shortcuts.

  If you hide the menu items and buttons with userChrome.css code so the menu shortcuts will still work.
  
  You can only disable the shortcuts with an extension.

  See also:

  • http://Mike.kaply.com/2013/02/11/Add-ons-in-the-distribution-directory/
  • http://Mike.kaply.com/2012/02/09/integrating-Add-ons-into-Firefox/

• you will need to determine the end of the video.

  I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

  If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.

• White space to the right of the mobile Muse Web site. You will need to disable horizontal scrolling?

  Here is my temporary site:

  Home

  After having tried the codes below, the problem appeared to be fixed (browser). However, problem still happens when viewing on the mobile device or preview with x-code iphone Simulator.

  I tried the following:

  • No selection of all to ensure that no stray objects / elements are outside the page.
  • Cache - everything on the page (so that only master remains). Problem still there. It's not there when only master published.
  • Using this code(on both object and property of the master page and main html page):

  < style >

  HTML {overflow-x: hidden ;}}

  < / style >

  • Using this code (on both object and property of the master page and main html page):

  < name meta = "viewport" content = "width = device-width, scalable user = no" / > "

  Any ideas?

  Looks OK on an iPhone 6. Such problems often occur if page items extend beyond the page area. Another thing to check is if this occurs if you disable the Gallery widget you use. Due to their nature, the code used in the widgets sometimes conflicts with own Muse code, particularly if you use sensitive design with older widgets.

  

  David

  Creative muse

• FRUSTRRATED. you will need to remove the Yahoo toolbar, remove BING and switch back to Google, open new windows in windows separte NOT tabs. Help, please!

  1. I didn't want Yahoo toolbar, but I can't get rid of it!
  2 need to change the new opening of the tabs in a single window several glass separte windows.
  3. somehow, BING has become my default page. How to return to GOOGLE?

  I also use the 3.6.19 version and do NOT want to upgrade to the new version of terrible. Please help thanks 3.6

  In the search bar, click on the little arrow, scroll down and choose "Manage search engines".

  In the menu next, click on Bing , highlight it, and then click Remove.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same thing.

  Thank you.

• You will need to validate the format of the time 24 hours with the check constraint.

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Hi, Athuru,

  Athurumithuru wrote:

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Let's start by defining precisely what you want.  For example

  1. The 1st character can be 0, 1, or 2.
  2. The 2nd character can be any number EXCEPT if the 1st character is '2', then the 2nd character must be in the range ' 0 'to 3'.
  3. The 3rd character can be '0' and '5'
  4. The 4th character can be any digit.

  It's pretty simple code like a regular expression with the exception of the exception in the 2.   Here's a way to get around that:

  REGEXP_LIKE (law on the)

  , ' (' || -options for the first 2 digits of start

  "([01][0-9])' |" --0 or 1, followed by another digit

  '| (2[0-3])'    || -2 followed by 0, 1, 2 or 3

  ')'              || -end of the options for the first 2 digits

  '[0-5]'          || -any digit between 0 and 5

  '[0-9]' - a figure

  )

  As others have said, think about the type of data.  How will you use this column?  If you really need a column which reflects a time of day, but not special, then perhaps an INTERVAL, or a NUMBER (for example, the number of hours after midnight) rather than a string.

• you will need to disable remote...

  Hello

  I am on a Mac Mini and a loop of the installation that I can't escape. I can't go to my office so I want to go to another computer and it would be useful to disable my web soft CS6 bonus before I do that I don't have to get down on my knees and pray for another activation to set up on another computer. Is it possible to disable remote?  Thank you

  FRank B

  Contact Adobe technical support via chat and ask them to reset your activations.  He'll recover the two that are at your disposal.  I hope that you have not to beg (it won't help)... just be sure to not ask for reboot.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Help, please! You will need to disable mobile web! (Rival A455)

  I have the Rival A455

  So 4 months is spent by the and each month I pay $ 2 extra on my Bill of 1 mb of data usage... I suppose that at some point every month I hit accidentally mobile web or one other option that uses the data... OR VERIZON IS RIPPING ME OFF!

  I argued twice now with Verizon on the phone and they refuse to withdraw the Bill.

  well want to can someone help me turn off the features of data or at least disable mobile web to prevent accidentally clicking on it?

  It would be greatly appreciated.

  BubbaJoe,

  You can disable the use of data on your phone and avoid charges by logging into your account on the website of Verizon Wireless. You can control what services you be charged. Just keep in mind that this will affect anything that uses data, such as downloading ring tones and games.