Similar Questions

• Supported and compatibility against Win Server 2008R2 and Win Server 2012R2

  Hey VMware,

  I'm looking for some information like support and compatibility of the product for Win Server 2008R2 and Win Server 2012R2 platforms below.

  Here is the application name and version:

  VMware vSphere Client 4.1.0.32733

  VMware vSphere Client 4.1.0.17435

  VMware vSphere Client 4.1.0.14766

  VMware vSphere Client 4.1.0.12319

  VMware vSphere Client 4.1.0.34274

  Please provide the results of the support and compatibility for above mentioned OS platforms, also you can provide details if all other support/contact channels are available.

  Thanks in advance.

  VMware KB: Supported operating systems hosts for vSphere Client (Windows) installation

• TouchSmart HP Envy 15-j122ea: RAM upgrade and compatibility

  I was looking to upgrade my RAM and I was wondering if those that are compatible with my computer:

  http://www.Newegg.com/global/UK/product/product.aspx?item=N82E16820104477

  Thank you in advance!

  Hi @MiroslavMarinov,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j122ea and research of compatibility and upgrading RAM. Hereis a link to your page 47 for compatible memory manuals. I see that the specs are the same and you have a maximum of 16 slots for 2 x 8 MB RAM. Your choice should work just fine.

  I hope this helps.

  Thank you.

• Zbook 15 3: 3 15 Zbook and compatibility issue P5Q58UT #ABA dock

  Say, if I browse the site, dock compatibility sheet tells me Zbook 15 3 is to use the P5Q58AA docking station, but it is a bit expensive.

  Surfing the net, I found #ABA P5Q58UT who seems very similar to the plug and the model number and half price... is it compatible with 15 3?

  Thank you

  gSal

  I the Zbook 15 G3 Mobile WS model and uses the dock P5Q58UT #ABA with him and I'm sending this reply from her with the attached dock. Have a 4K and the FHD monitor attached to 2 DP ports on the dock. The power cable from the cradle to the computer is unique to the Zbook AFAIK. It is a thing with two heads with a power outlet right next to a socket on the USB - standard.

  But in any event I can confirm the dock you buy will work fine.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Schedule the Winzip files and 'compatibility' with Windows 7 - HELP!

  Hello

  I have recently upgraded to Windows 7 from XP.  I have an online game (war hammer) with some friends and need to download a few files of curse.com to upgrade my interface in this game.  Under XP, things has worked well, but here's my problem with Windows 7.

  Everything by searching my directory of war hammer I found it under Program Files (x 86) vs my normal method on my desk or in the program file.  I keep Electronic Arts Warhammer Online - Age of Reckoning - Interface - Addons.

  From here, I have the head on the Curse.com website and save the files under this folder.  Then, I went to winzip and extract use them all in the game (war hammer).  When I tried to see the files in that folder, I was surprised to see 'nothing' listed!  I called a friend to walk me through the way he his under windows 7 and for some reason any, he has his records and mine are gone.  However, there is a button at the top that says: "compatibility files"?  If I click this button then all of my files show but for some reason any, that they cannot be played in the game to do what I need to do...

  Thoughts?

  Help!

  Hi Zhadum,

  As the game is compatible with Windows 7, it is indicated herethe link of Microsoft Compatibility Center. It should work in normal mode; I suggest you contact the manufacturer of the game, as the issue seems to be with the game from the link below.

  http://www.warhammeronline.com/forums/

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Update and compatibility Windows 10

  Hi, I have a Sony vaio VPCEB27FD Premium windows 7 and I don't know if my computer works fine on windows 10 because on the Sony site, they say they did not drivers for my laptop but windows 10 may have the right drivers for my laptop, so I don't know if I should update for windows 10 or not. Should I update?

  Thank you

  Test the compatibility of the computer

  1 see this WiKi article - Windows 7, 8.1, 10 compatibility tests for Windows XP, Vista - WiKi.  It was written for older versions, but the discussion also applies to Windows 7 and article contains the download link, that you need for the auditor of compatibility [which should have been downloaded & installed on your computer from Windows 7 to Windows update anyway].

  2 study the drivers before upgrading your machine - see where to find the hardware drivers.

  3 search online, including the Sony user forums if they, for Sony vaio VPCEB27FD Windows 10 so see if there's useful reports by other users who have tried to level.

  Denis

• Cisco UCS 260 M 2 5.5 U3 - custom image and compatibility

  TAC has a customer turned and pointed toward a compatibility table for an installed UCS - C 260M 2, stating that the firmware of the UCS and the latest version of Vmware is not supported.

  They are suggesting that the client moves to fimware 1.5 (9) and they use a customized image of Cisco for Vmware.

  This facility is for UC/EAC, so I have to make sure that the versions supported in the docwiki for these products as well is the Vmware version.

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  The drop down menu shows Vmware 5.5 U3 is a supported version and I find that 5.5 is supported in the dockwiki. So far so good.

  However, when I try to find a custom image for 5.5 U3 image only I find it:

  https://my.VMware.com/Web/VMware/details?ProductID=353&downloadGroup=OEM...

  VMware 5.5 U3a. The version of the driver specified on this page do not match driver versions indicating the interoperability matrix must be used.

  First, is there a customized image of Cisco for 5.5 U3, could someone point me to this image so that these versions of the drivers are the same?

  Secondly, can I use ISO customized Cisco to upgrade a vanilla install Vmware 5.1 U3?

  -GDR

  Greetings.

  The Cisco Custom images are just a collection of pilots who were up-to-date at the time wherever it has been presented to VMware.  It is expected that iso custom will exactly match the interoperability matrix (it could have at the time, it was created), but at least provide newer drivers than what is usually installed in the general VMware releases.

  The interoperability matrix will list the specific driver, i.e. igb driver intel 1 GB network interface.  Download you the version of the driver for VMware site and install adapt you to the requirements notified by the interoperability matrix.

  You should be able to use a custom Cisco ISO to upgrade.  When your custom installation ISO analyzes your existing system, it will see a higher version of the drivers/VIBs and update those.  The Cisco with custom isos are simply the original VMware updated versions the drivers injected into them.

  Thank you

  Kirk...

• Windows 8 and compatibility of quickbooks 2012

  I depend on Quickbooks for my business. even if I want to upgrade to Windows 8 and hope for greater stability than Windows 7, I am concerned about the comatibility

  Hello

  Thanks for posting on Microsoft Community!

  I understand from your post, you want to know if Windows 8 is compatible with QuickBooks 2012.

  Please click on the link below to check the compatibility of QuickBooks 2012 with Windows 8, depending on the version you use for QuickBooks 2012.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=quickbooks%2B2012&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If you need additional help, just reply to us and we will be happy to help you.
  Thank you

• Card graphic Inspiron 3847 and compatibility PSU

  Hello everyone.

  I recently decided that I get a new graphics card. And the one I want (NVIDIA - GeForce GTX 970 4 GB GDDR5 PCI Express 3.0), requires a higher power than the stock of 300 Watt one. I don't know too much about compatibility standards, so I basically just want to get a 500 Watt POWER supply. All recommendations are appreciated. I need to know what I can get which is compatible with my PC.

  Here's the link to my PC, if you need it-

  I want graphics card (if compatible).

  If you can, please let me know if it is not compatible for some reason and recommendation possible something that is compatible with my PC.

  Unless you have warranty EXTENT invalidation Mods if this card WILL NOT physically go into the matter.

  Abbreviated from the 750 GTX TI versions work, but the 970 does not.

  8.20 "to 8,89" x 4.72 "x 1.50" inches is about max (depends on the power to the enter the end of the map or in the upper part), which is what was the Geforce 560 TI, which has been shoehorned.  She barely and was VERY tight.

  Corsair CS750M is recommended to upgrade power supply.

  02G - P3 - 1568 - EVGA GeForce GTX 560 Ti KR is the c.e.a map

  http://www.Newegg.com/product/product.aspx?item=N82E16814130683

  

• VSphere APIs and compatibility ESX

  I've implemented the backup of a VMWare VM and application of recovery with vSphere API and VDDK. The development has been done entirely on 5.0 ESX servers. The following discussion provides an overview of how I implemented the restoration.

  http://communities.VMware.com/message/2130483#2130483

  When another person has tested my application, he noted the rollback feature does not work. When I've debugged, I found parameter spec unit to CreateVM_Task behaves differently 5.0 Esx to Esx 4.0. In the case of Esx 5.0, it works perfectly, where as in the case of Esx 4.0, none of the devices that I fill before the CreateVM_Task is created and the restore fails because of this.

  How can I understand the compatibility of the Esx and the vSphereAPI versions? I assumed that the SDK should be retro-compatible with Esx Server? Can someone shed some light how this problem can be solved?

  Thank you

  . / Siva.

  Hi Siva,

  That sounds good, maybe, we'll get you going even faster than I expected:

  As already noted William

  lamw wrote:
  but in general, the more recent editions of vSphere will support previous editions of vSphere. vSphere 5.1 supports vSphere 4.x and 5.0

  the only thing being that if new properties are added to a data in 5.1 object then you can not use in 4.x or 5.0.

  It seems to me that your code is based on 5.0 WSDL generated by gsoap stubs. It is ultimately you generate SOAP requests that are supposed to work with 5.0, 5.1, 6.x one as well now. Yet, when he delivers the SOAP messages to 4.x, it is likely that you include a property that is not defined in the WSDL of 4.x.

  Attached is a diff of the definition WSDL VirtualMachineConfigSpec of 4.0 to 5.0 Quick. Look at line 27 and following

  
  27              
  ====
        !>      
  ====
  28              
  

  Here, you can see that numCoresPerSocket property was not available in 4.0, but was added in 5.0. It is also what we said the documentation centre: for vSphere API 5.0.

  You declare that numCPUs is affected but memoryMB not. Between the two numCoresPerSocket has been inserted to 5.0. It seems that the 4.0 Server reads your VirtualMachineConfigSpec until numCPUs then encounter numCoresPerSocket and abandoned.

  So far my theory.

  What I don't understand is that this seems to happen in silence as you don't declare any exception. Yet, says William

  wlam wrote:
  As you know, there will be new properties in new versions of vSphere such as 5.1, that if you try to assign to an older version of vSphere, it will throw an unknown error...

  As you can learn from the attached diff we serveral more properties that have been added to the 5.0. Might well want to comment on all those in your current code and re-run CreateVM_Task against server 4.0.

  Perhaps this might solve the problem.

• Adobe Presenter 10 and compatibility mode

  I use Presenter to create training modules where I work.  Can I publish the module, but when the user tries to launch it - they get a blank screen.  I have shown that staff need to return to compatibility mode and display modules.  Is it possible that this can be done without having to do this staff?  With 1100 employees, this can be problematic.  Help, please.

  I don't know this particular subject, but I've had the opposite happen, where videos were not appear in compatibility view.  The same result of the white screen was going well.

  I added the following line to the index.htm file in thesection and it worked after that:

  Not sure if it would work exactly for you, but it could put you on the right track since its compatibility on display.

• Customer display 5.0.0 and compatibility view connection server 5.1

  Curently we run see 5.0.0 eviorment but we are planing an upgrade in 5.1 mode and I'm a little confused abut compatibility view 5.1 server connection and view customer 5.0.0.

  Here in this compatibility matrix, it seems that customer 5.0.0 and 5.1 server are compatible.

  
  And here, in this compatibility matrix, it looks like this only 5.01 client is compatible with Server 5.1

  

  So if I upgrade the servers to connect to 5.1 will be users with 5.0.0 customers still able to connect to their desktop?

  Best regards, Primoz

  Customer display 5.0 is compatible with the 5.1 server connection; However, the 4.x clients are not. That's what you see above.

• updates and compatibility

  I have a 2011 macbook pro using os 10.7.5. because Safari is old I'm starting to get some grief from websites, so finally, I think I might have to upgrade the operating system. As most of you know, this can cause a thousand problems with programs and current applications. So I ask your experience please. Upgrade to El Capitan will cause problems with Microsoft Office? With Adobe Creative Suite 6 (i.e. NOT the cloud version)? or something like Reunion10?

  Thanks for any help you can provide.

  Office 2011 and Adobe CS6 work very well by CBS. But if the browser is the only thing pushing you to upgrade, you might as well move to another.

• Office 2011 and compatibility printing El Capitan

  I'm like El Capitan, but late last night, I tried to print a Word document for the first time since Windows Office 2011 and had problems - spinning beachball and then the paper closed.  A notice of 'error' came.  I couldn't print on the trendy hp1400 or the Deskjet wireless.  My wife has been able to print a focus on my hp1400.  We have 2 printers - a 1400 hp and a series of J611 Deskjet 3050 wireless [OCDFAE]. (MacBook Pro early 2011) 16 GB 1333 MHZ DDR3 OS X El Capitan 10.11.5 version) I've seen other reports of the same problem but have not found the solution.

  More of the puzzle.  My wife also has a MacBook Pro with Office 2011 - Siena had the faulty motherboard which had to be replaced a year ago.  It has updated to El Capitan and can print on the wireless.

  Contact Ms., Office 2011 prints normally (in general), when its not its a MS problem

• Tecra 9100 and compatibility with 32-bit/3, 3V PC Cards (PCMCIA)?

  I would like to increase the power of my WIFI.

  The internal card supports 802.11 a standard only.

  The Tecra 9100 Series is compatible with 32-bit/3, 3V-PCMCIA cards?

  Hello

  According to the specifications of the computer laptop Tecra 9100 is ready WLAN and can be upgraded with standard Wi - Fi 802. 11B. I have the same WLAN card on my Tecra M1 and I'm really happy. You can buy the Wireless (PA3189U-1MPC) recommended LAN card and like to be mobile. The transfer of data is OK and you don't need a better card for this good old classic.

  It is an old map and it won't be cheap. Check it out.