Z5 failure full Compact
Hi all
I've had my Z5 Compact for a few weeks now. He had light use but seems to be rather warm. It froze right up on top of me and completely closed. Now, it will not witch on and it will not connect to my PC - no charge light or light transfer, nothing.
Any ideas? It has just overheated?
OK, a hard reset was back up and running. For now...
Tags: Sony Phones
Similar Questions
-
Detect the type of keyboard - QWERTY full compact versus (style Pearl)
Hello
Is it possible to detect which type of keyboard is the device?
If it is full qwerty or if the compact/Pearl style keyboard.
-MO
Keypad.getHardwareLayout ()?
-
How to get Outlook Express to stop and you will invite to compact your emails when closing.
My wife and I use Outlook Express on our machines at home for e-mail (OE is his primary e-mail program, I use it for a secondary e-mail address).
When we are done with the program and you want to close, we are always invited to compact mail folders. I prefer not to do it while I had problems with files compacted in the past.
Is it possible to change a setting in Outlook Express to stop inciting us to compact the folders of our mail? I looked through the tools and other areas in Outlook and still found nothing. Help, please. Thank you!
Drew
You can't turn it off, and failure to compact surely will scan your message store sooner or later.
Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compactAbout file Corruption:
http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspxCompacting your folders periodically is a must to keep OE works fine and at some point, you may lose all your saved messages if you do not. When you delete or move messages, the space they used remains until you compact.
Never touch anything until the compression is finished.* *.
See:
www.oehelp.com/OETips.aspx#2With SP2, Automatic compaction in the background has been removed because of problems he has caused. Now, you will get a prompt to compact after 100 closures of OE, you need to do, and do not touch anything until it's finished. If you compact manually, at your convenience, this will also set the counter to zero. See this for more information:
http://www.insideoe.com/files/maintain.htm#compactIf you are fully patched, you will now see a copy of your dbx files copied to the Recycle Bin as BAK files. If something goes wrong when compacting, the messages can be easily restored from this backup. A compact manual resets also the counter in the back of the registry to zero now.
For more information, see the information framed in red here:
www.oehelp.com/OETips.aspx#2To keep things running smooth and harden faster:
Do not archive mail in default OE folders. It will eventually become corrupt and you may lose mail. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspxBruce Hagen ~ MS - MVP [Mail]
-
Money 2004 XP restore backup on replacement computer
My old XP computer had a failure full processor/motherboard.
I bought a new device running windows 7.
I installed my old HDD as an additional unit [in the course of execution independently], but when I try to use the old HARD disk Money backup file, the computer fails to recognize the location of the backup file.
All I want to do is restore all my old data to the new HARD drive.
Any offers?For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Rescue and recovery X 1 Win10PRO carbon
Just got a X carbon 1 and modernized to win 10
1)
Wanted to use the system to make a picture, but I got
ERROR: "there was a failure while compacting the virtual disk on the backup location. (0 x 80780151)
Googled around, bu tno solution.
Anyone know when it will be solved?
2)
And another problem. I am IBM and Lenovo user for several years, and the best backup system I've ever used is the rescue and recovery. After getting my new X 1 carbon with 8.1 Pro I upgraded to 10 Pro and if you come for the Lenovo of installation I clicked for works RandR 4.52, which proved in the software Lenovo, but unfortunately it download, unpack and then stops. Without any news. So I started the Setup file myslef, and... my God... it can not be installed!
I'm angry.
Why Lenovo not tell us this? And if she came, when is it ready?
Lenovo Solution Center, if you use win8 or win 10, should offer NOT RNR as a backup option.
If would be nice if they removed the advertising, "it takes a HDD to take backup more," store here.
To win 10, I would like to start off the coast with a windows image backup. Apparently, windows launched LSC backup, and you got the return code that you noted in the initial post. Backup Windows runs fast, but it lacks many features of RNR.
I would like to run windows backup from the Control Panel, which you have done already. Some of the windows backup return codes and error messages, can be deceiving. Check the EVENT VIEWER after windows backup error, to see if other return codes are present.
Example: "you do have not enough free space on the device target to perform a backup' RC = 0 x 00000.
Further, the question was NOT enough free space in the lecteur_systeme windows backup staging a zone index for vs.
I would check the available in System_drive freespace. This can be a hidden partition. You need at least 200 MB freespace.
A google search of the return code that State you have many successes. I have try the backup, check the event viewer for VSS fail return code, which is passed back to backup windows. If you have a VSS error, I would google search on the return code from VSS, windows backup not the return code.
-
Hi guys
Two sites are on connection MPLS and things work fine. Is now looking to connect a second ISP and create a failover site-to-site VPN. If the main ISP goes down (in the case of a power failure full at the ISP level which is unlikely, but just in case) then MPLS should failover site to site VPN which will be completely on a different secondary ISP. Can someone provide me with options as if I have to use ospf, bgp and ip sla? If the follow-up involved how can I follow the MPLS? is it even that track just interface or any special routing required? etc and... your help is greatly appreciated... Thank you...
Hello
It actually depends on what is already at work.
I usually do with IP SLA is not running Routing Protocol, OSPF, BGP are always my first option.
IP SLA parameters should be the same, just point to an available IP address accessible through the main connection and follow your routes using this instance.
In terms of VPN, make sure the encryption card is on the secondary interface, and it should do.
HTH.
Portu.
Please note all useful messages.
-
High EC of Reed-Solomon on 887VA with VDSL
Hello
I recently implemented a C887VA-W-E-K9 router to connect to Vodafone fiber 80/20. This is my first time setting a circuit xDSL from scratch on these routers, so I don't know if the config is 100% good - but it works anyway (much to my delight).
After a break-in period initial of unexplained CRC errors & header and chronically low download speeds (~ 6 Mbps download, download 19Mbps) the line seems to have "settled".
Despite said we would most likely be able to move because of our remoteness of cabinet 50Mbps, the router reports as possible synchronization regularly on 73Mbps and speeds in the 1980s.
Although nobody complained of any problems in the Office I know, I see the values of Reed-Solomon EC persistently high in the statistics for the VDSL controller. The fact that the rest numbers are zero makes me think that it should not be as important?
Here is the result of sh controller vdsl 0, took about 30 minutes after I deleted the counters on it:
VDSL controller 0 is in PLACE
Status of demon: upward
UERX-C UERX-R (DS) (US)
Chip Vendor ID: 'BDCM""IFTN.
Chip Vendor Specific: 0 x 0000 0xB203
Chip dealer: 0xB500 0xB500
Modem provider ID: 'ECOC' ' '
Provider-specific modem: 0 x 4602 0x0000
Dealer of modem: 0xB500 0x0000
Close serial number: FCZ17 * C887VA-W (3) 15.3 M3
This serial number: 55023 *.
Close modem version: 15.3 (3) M3
Modem Version until now: 0xb203Modem status: TC Sync (Showtime!)
DSL Config Mode: AUTO
Trained mode: profile G.993.2 (VDSL2) 17A
TC mode: PTM
Automatic test result: 0x00
DELT setting: disabled
State DELT: works not
Lattice: ONE ON
SRA: Disabled disabled
County SRA: 0 0
Bit swap: activated activated
Little County swap: 0 0
The line attenuation: dB 0.0 0.0 dB
Attenuation of the signal: dB 0.0 0.0 dB
Noise margin: 6.3 9.8 dB dB
Best rate: 86392 Kbps Kbps 28273
Real power: 12.7 dBm 4.5 dBm
By the quality of the Strip: D1 D2 D3 U0 U1 U2 U3
Line Attenuation (dB): 10.9 25.7 39.9 20.4 0.6 31.5 n/a
The signal attenuation (dB): 10.9 25.7 39.9 0.6 20.2 31.4 s/o
Noise Margin (dB): 6.3 6.3 6.3 10.2 10.0 9.6 s/o
Total FECC: 107824 69
Total ARE: 1 3
Total ITS: 0 0
Total LOSS: 0 0
Total Paramedics: 0 0
Total permanent residents: 0 0
Total FLY: 0 0
Total LOLS: 0 0Full inits: 1
Failure full inits: 0
Short inits: 0
Failed short inits: 0Name of the Source file for the firmware (version)
-------- ------ -------------------
VDSL integrated VDSL_LINUX_DEV_01212008 (1)Modem FW version: 130205_1433 - 4.02 l. 03.A2pv6C035j.d23j
Modem PHY Version: A2pv6C035j.d23j
The provider version: Ap6v35j.23j 68Channel 1 channel 1 US canal0 US canal0 DS DS
Speed (Kbps): 0 73775 0 20000
SRA previous speed: 0 0 0 0
Previous speed: 0 0 0 0
Reed-Solomon EC: 0 107824 0 69
CRC Errors: 0 1 0 3
Header errors: 0 0 0 0
Interleave (ms): 8.00 0.00 0.00 0.00
Real INP: 3.00 0.00 0.00 0.00Training log: order
The training log file name: flash: vdsllog.binAs you can see - the County of Reed-Solomon EC is already in 107 824 and he operates a rise into the millions. It doesn't seem to be constantly special to him.
I've been in contact with our broadband providers who do not really able to help and insist that if we use the BT Openreach modem before our router is not a supported configuration. Vodafone are also telling them the same thing when she was refitted. I have also been told - I don't think - that the 887VA cannot support VDSL of 80/20, but the CPU on it barely exceeds 15%, even with the CBAC and active IPSEC, it seems pretty meaty.
Vodafone also gave me a load of settings which don't (I think?) apply to VDSL-e.g. VCI, VPI and VC-Mux/VC-based multiplexing? I see no way to put these on the Dialer0 interface, and the ATM0 interface is administratively down as he used it.
Anyone can shed some light on this?
Is our "noise margin" too low? A MTU mismatch cause this kind of problem? (currently I have no explicitly set MTU settings, and sh int shows like 1500 - which Vodafone said also we should aim).
I want to emphasize speed wise I ran speed trials consistently show download speeds ~ 70Mbps and download of ~ 18Mbps and there is no desync I've seen - so just what is causing these numbers of Reed-Solomon EC does not have a negative impact on the line or the quality of the service.
Hello
In response to user889988, it's a very good point, suggesting an upgrade to the modem FW as Cisco has worked with BT to produce a specific code for UK trade.
The fix is well documented and you can search;
automatic operation mode
internal service
Modem ukfeature
Flash the firmware file name: [name]
BUT in this case, it is not necessary, 887VA have been shipping for a while (approx.<12mths), with="" later="" firmware="">12mths),>
The index is the file name
... 35J.d23j
Earlier patched versions were 35 nd d. where are replaced by the foregoing.
It might be worth you checking the other orders above well (except the name of the firmware a file).
n.b.: operation automatic mode by default and does not show in the running configuration,
(HS control vdsl 0 contains "DSL Config Mode: AUTO ' well)
and "modem ukfeature" - you can see in the output of
'show controller vdsl 0 console [number]' after the trains of modem DSL;
you see something like: -.
Force UKFeatureBit SET
There was once a link to the doc to the following, but I think it's a dead link now.
-
HA sensitivity of host isolation
Hello
I was wondering if it is configurable to meanings?
When you test the abduction of a switch of my kernel stack, I found that battery restarted in response, resulting in a failure full of about a minute. This is why I really need to configure somehow HA to react only after, say, five minutes for the isolation of the host.
Thank you very much
As I understand it, das.failuredetectiontime should be what you are looking for.
See HA Deepdive for more details
André
-
LAN-Free backup of snapshots VMDK of ESX Cluster
My intention is to perform a backup outside shots VMDK of ESX Cluster to VCB Proxy Server LAN.
I have a scenario where I have 3 ESX servers with 3 x 800 GB LUNS in a storage group separate on a CX 310 SAN box. The Ids., (HLUs) host these 3 LUN LUN are 0, 1, and 2. All these three LUNS is a VMFS volume each on the ESX Cluster and all three LUNS are visible to all the ESX servers.
I have a physical host that boot from SAN (the same box of CX 310 SAN) and this host will be designated as the VCB Proxy Server.
Now, I'm going to add a 1 TB LUN to the storage group as the LUN 4 ESX servers and the Id., (HLU) host LUNS for this one will be 3. This logic unit number will be added as the 4th volume of the cluster ESX VMFS. It will also show all three ESX servers in the Cluster.
I'll create a Windows VM 'VM2K3' on ESX Server 1, and I intend to add the volume (1 TB) entire VMFS 4th as "D:\". "drive"VM2K3 ". I'll share this disc "D:\". "and it will be mapped as drive"T:\ ". "on the VCB Proxy Server. This disk 'T:\ '. "will be the target for the storage of the VMDK to snapshot backups, in a compressed format. I use VizionCore vRanger software connection to this effect on the server VCB Proxy itself.
Question 1.
This scenario will provide the backup off LAN of VMDK instant?
Question 2.
In the case of a failure full 1 ESX Server, VMotion will be or a manual movement of the virtual from Windows "VM2K3" machine would affect the LAN-Freee of instant VMDK backup? If so, how will this affect and what will be the impact?
Question 3.
The "C:\". "Logic of the VCB Proxy unit number will be a 30 GB SATA LUN and the total size of the RAM on the VCB Proxy Server is 8 GB. The ability to drive "C:\". "30 GB will be sufficient to make faster given the fact that I have about 45 VMs at this point in time?
Any help or suggestion or two in this case would be very useful.
Hello
A physical machine cannot directly access a VMDK in a VMFS. There may directly access LUN, that LUN could then accessible by a VM with RDM or virtual RDM mode. But why would you do it is really beyond me.
The VCB Proxy running W2K3 and you present all your VMFS volumes (make sure that you don't have a letter assignment drive automatically enabled when you make this presentation). See http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_vm_backup.pdf for assistance with this.
VCB proxy then read this VMFS and copy data from it to your T:\ drive (MON).
Remember that no two hosts can access the same logical unit number unless you use a clustered file system.
Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
I was not able to find out what my quota is supposed to be. (There is a way to limit the number of days I want messages that should stand, but I've never used). I have several folders for messages, but when I tried to transfer some of the messages to those (messages I had to record), I've always had the memo "Inbox is full." The message also said that I could compact the Inbox, but I don't know how to do, either. I've always been happy with Mozilla, but I need your good help!
Deleting messages only marks them for deletion and mask them. The space is not released until you compact the folder. You compact individual records by clicking on the folder and select folder Compact or you compact all folders by selecting the Compact on the file menu.
-
Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure Mode (failure mode). Can anyone help?
Hello
Click Edit > Preferences
Go to the interface tab and check the font size: it should be automatic.
Press enter
Restart the Lightroom
Thank you
-
An old message is stuck in my Inbox. No matter what I do it not delete and I can no longer receive email on this computer because I get this message: there is not enough disk space to download new messages. Try to delete old messages, empty the deleted folder and compacting of your e-mail folders, and then try again. I erased my delete and send files and greatly reduced my folders, but the same situation applies. I tried to compact manually, but then I get the message that it can not compact as another process is running. However, on my iphone, or on another computer, I can still get an email update.
try to take the file offline Thunderbird (Alt + F) menu > offline > workoffline
Close Thunderbird
Restart your computer
Restart Thunderbird and try compacting while Thunderbird is still offline. -
Invisible messages to Outlook Express 6 after failure "compact all folders.
I start Outlook Express 6 XP. On closing yesterday that I was invited to compact the folders - said yes, but he hung up at halfway and locked the PC and I finally had to force a power down. PC started today to find any message in most folders, including the Inbox. DBX files are visible and of reasonable size, and their properties say they are those that are used by OE, but show in OE as "There is no evidence at this point of view". Help, please, anyone?
Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact
Why mail disappears:
http://www.insideoe.com/problems/bugs.htm#mailgoneRecovery methods:If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.To restore a folder bak on the message store folder, first find the location of the message store.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
If you have not then bak copies of your dbx files in the Recycle Bin:DBXpress run in extract disc Mode is the best chance to recover messages:
http://www.oehelp.com/DBXpress/default.aspxAnd see:
http://www.oehelp.com/OETips.aspx#4A general warning to help avoid this in the future:Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3And backup often.Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Compact Messenger has cleared my inbox full and subfolders
While the compact Messenger was occupied the dead stopped PC and I turned off. When I opened Outlook Express I noticed it was empty as well as all subfolders of Inbox - I then looked at the basket and found all related e-mails I pressed and then RESTORE all and he scratched all and did not restore.
It has nothing to do with Messenger, it's a thing of OE.Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact
Why mail disappears:
http://www.insideoe.com/problems/bugs.htm#mailgoneRecovery methods:If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.To restore a folder bak on the message store folder, first find the location of the message store.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
If you have not then bak copies of your dbx files in the Recycle Bin:DBXpress run in extract disc Mode is the best chance to recover messages:
http://www.oehelp.com/DBXpress/default.aspxAnd see:
http://www.oehelp.com/OETips.aspx#4A general warning to help avoid this in the future:Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3And backup often.Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit
I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.
Or try Dell Support/Forums:
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
Dell's Support Forums at the link above.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
G72 laptop: black screen
The screen will turn black when you move the cover forward or backward. Sometimes I have to hit the cover of the screen lights up. What would be the most likely cause?
-
Support for my Satellite U840W-107
Hi guys! Since it is impossible to contact Toshiba Bulgaria in any way possible, that I am forced to use this forum. Can someone tell me how do I solve a problem with the Intel Management Engine Interface 9.5.24.1790? When you start the computer, I a
-
HP ProBook 430 G2: Helmets with Sockets audio combo?
My G2 430 ProBook comes with an input jack audio combo. I can not connect normal headphones with two plugs (one for sound out and another for the sound in). Can I connect a USB headset, but there is not a lot of available USB headsets and they are us
-
Indicator of e-mail blackBerry Smartphones
I used to have a small red star appearing next to the email icon, but it has now disappeared. How can I get it back?
-
I know on XP 2000, the paint program was a lot many features like the one I'm looking for. However the default Windows 7 drawing program doesn't have the option of the curve to modify a line.