Z70 - 80 - [AS] Windows 8.1 - Service Lenovo - New Installation

Similar Questions

• Restore saved the Windows Mail Messages in the New Installation of Windows Mail

  I found the following on this forum thread. Further to this review in the second paragraph, I was able to move a message to the empty folder. But I was unable to move the other messages in the folder. The files I tried to move appeared as attachments in a new message. The .eml files and not marked read-only. What should I try next?

  TIA,

  Michael R

  Windows Mail does not dbx files.  Copy the store directory of all message on the desktop of the new machine.  Then right-click on the file and go to properties and make sure that they are not read-only.  Then go to file | Import | Messages in WinMail and choose the format from Windows Mail 7 and point to this directory.   See also here for general information: www.oehelp.com/backup.aspx#wm
   
  If you can not always get messages in folders, you can create a new folder in WinMail and open it so that it displays a list of empty message.  Then, open up one of the subdirectories containing eml files in Explorer and drag an eml file on top of the list of message empty folder and drop and you will see it is embedded in the file.  Once you get a job, you can drag and drop all eml files at a time, as long as they are only the eml files.
   
  Steve
   
  wrote in message email: removed privacy news ...

  I'll have to re - set up my Windows Mail after the death of my old hard drive. I am trying to import my old files from my Windows Mail Backup in my new Windows Mail. I was able to transfer the former folders of the backup but when I go to import it recognizes not all files. The error reads: "no messages are located in this folder or another application is running...". "I read several threads and it seems I also have to transfer via a file called folders.dbx, but it is not a list. I did a complete search on my C drive and nothing. How can I get these old records imported without this file?

  Thank you!

  They are attachments because you drag another file in addition to the eml files.  When you select the eml files to ensure that they areonly the eml files and then it will work.
   
  see you soon,
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I found the following on this forum thread. Further to this review in the second paragraph, I was able to move a message to the empty folder. But I was unable to move the other messages in the folder. The files I tried to move appeared as attachments in a new message. The .eml files and not marked read-only. What should I try next?

  TIA,

  Michael R

  Windows Mail does not dbx files.  Copy the store directory of all message on the desktop of the new machine.  Then right-click on the file and go to properties and make sure that they are not read-only.  Then go to file | Import | Messages in WinMail and choose the format from Windows Mail 7 and point to this directory.   See also here for general information: www.oehelp.com/backup.aspx#wm
   
  If you can not always get messages in folders, you can create a new folder in WinMail and open it so that it displays a list of empty message.  Then, open up one of the subdirectories containing eml files in Explorer and drag an eml file on top of the list of message empty folder and drop and you will see it is embedded in the file.  Once you get a job, you can drag and drop all eml files at a time, as long as they are only the eml files.
   
  Steve
   
  wrote in message email: removed privacy news ...

  I'll have to re - set up my Windows Mail after the death of my old hard drive. I am trying to import my old files from my Windows Mail Backup in my new Windows Mail. I was able to transfer the former folders of the backup but when I go to import it recognizes not all files. The error reads: "no messages are located in this folder or another application is running...". "I read several threads and it seems I also have to transfer via a file called folders.dbx, but it is not a list. I did a complete search on my C drive and nothing. How can I get these old records imported without this file?

  Thank you!

• Windows 7 update after the new installation fails

  This becomes a serious problem. I do not believe that Microsoft would intentionally vandalize their own operating system but, that's what I'm thinking... everything to force us to Windows 10. I do a fresh install of Windows 7 Pro x 64 bit on a regular basis and this is a question. The first time that I started to meet it, I studied the problem to find that I had to install some updates before letting Windows try one it automatically. Fine, problem solved. Then, I started having the same problem again. Search again and find ago now more updates, I have to do before letting Windows Update automatically. So now I am back to the drawing board with the SAME FREAKIN PROBLEM. Seriously, Microsoft has to stop screwing of update Windows 7 system. I DO NOT PUT AT LEVEL 10 CRAP! One who knows the most recent updates, that I need to download before you let Windows Update automatically, please post a reply. I currently install the following: KO... 947821, 3078601, 3083710, 3087039, 3102810, 3109094, 3138612, 3145739, 3161664. If I'm missing anything please let me know... also, the system refuses to load the 3172605 (July/August rollup) indicating that it does not apply to the system, even if it should. Yes, I ran the update problems... Yes, I went to COM and reset the appropriate services... Yes, I ran SFC/scannow... No, none of them doesn't help.

  There are essentially 3 updates necessary for a clean installation of windows that you have updated until April 2016

  KB3020369 & KB3172605 and KB3125574 that can all be downloaded from the catalog of $ M using internet explore
  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  To manually install them you will need to ensure that the built in windows update service is stopped, first the Manual value.

  Once you have completed the service back to default, switch

  

• G7 2233 pilots missing after windows 7 ultimate 64-bit new installation

  Hi - I received the computer modeled above with 8 pre-installed windows. I installed a clean install (wiped readers) and installed the operating system Windows 7 Ultimate 64-bit. When I did, none of the internet connections would even work. I since found (somehow) a pilot who was consistent, which deals with the missing wifi adapter, but I still need the following items:

  Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_184B103C & REV_05

  PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01

  UNKNOWN DEVICE: ACPI\HPQ004

  I can't find these anywhere, PLEASE help.

  When you request support, please provide the HP model name and/or product the full number of the computer in question.

  Assuming that you have a HP Pavilion laptop g7-2233 cl, specifications, other than the CPU, the RAM and the size of the screen, seem to be the same as my sister-brother g6-2210us laptop HP Pavilion computer. Drivers 64-bit of Windows 8 listed for two computers are the same. I installed Windows 7 64 bit on his computer about a month ago and used the following drivers of multiple origins;

  Drivers for Chipset AMD (Chipset, USB 3.0, SATA/RAID)

  AMD Catalyst Display Driver

  Realtek FE family LAN Driver 

  Card reader driver Realtek PCIe RTS5229 

  HP sp54972 Atheros 5xxx/9xxx WLAN Driver

  HP IDT HD Audio Driver sp59620

  HP sp58539 touchpad driver Synaptics PS2

  HP CoolSense sp60051

  and from Windows Update "HP Mobile Data Protection Sensor.

  It is possible that the WLAN chipset on your machine is different and may require different drivers.

  I've also updated updated the Synaptics driver to v16.2.21 on Synaptics site. Some of the factors above may require the HP sp59202 software framework. In addition, the WebCam requires the package of "VideoCM" of the "SWsetup" folder in the original installation of Windows 8 and CyberLink YouCam sp59986.

  When you are finished, there is no unknown device on its system.

  Please send Bravo

• Not able to connect to APEX Administration Services after new installation

  Hello

  I installed oracle database 11g (11.2) and apex 4.2.3 in my laptop.  I did all the steps and now I'm at the stage

  "Create a workspace and add users of the Oracle Application Express".

  When I'm starting to apex, I get just blank page.  Don't know what the problem is.  If anyone can help.

  http:// localhost : 8080 apex_admin/apex/apex_admin

  There's no problem in logging into Oracle.  I faced a problem when setting up "Embedded PL/SQL gateway.  Not sure if this causing issues while opening apex.

  . Loading images directory: C:\Anand\APEX\apex_423\apex\images

  Created directory.

  declare

  *

  ERROR on line 1:

  ORA-22288: file or LOB FILEOPEN operation failed

  The system does not have the specified path.

  ORA-06512: at "SYS." XMLTYPE", line 296

  ORA-06512: at line 16 level

  PL/SQL procedure successfully completed

  Thank you and best regards,

  -Anand

  Hi Jariola,

  Don't know why my my configuration of the embedded PL/SQL gateway failed after repeated tests.

  I uninstalled APEX completely and then kept my "apex" installation folder under "c:\temp".  Then run under-

  @apex_epg_config.sql C:\temp

  This time he succeeded without any problem.  I am now able to connect to the apex

  The only change is the folder when I kept my installation of apex.  Earlier, it was "C:\Anand\APEX\apex_423" and now "c:\temp\apex".

  Platform

  APEX version: 4.2.3.00.08

  DB version: 11g Release 11.2.0.1.0

  Web server: EPG

  System operating system: Business Windows 7 64 bit

  Browser (s) / version (s): Google Chrome: version 31.0.1650.57 m

  Thanks to all who tried to help.

  Kind regards

  -Anand

• Windows Embedded Standard Service Pack 3

  I use Windows Embedded Standard Service Pack 1 in my pos machine. I want to install a new application that is supports only Windows embedded standard service pack 3. I am trying to get the service pack 3 for windows embedded standard.

  I can't find something. Is it available?

  Please please someone help me.

  Hi Omar,.

  Since then, the query is related to Windows Embedded Standard Service Pack 3 installation. I would say that contact their support site to improve assistance:

  http://TechNet.Microsoft.com/en-us/windowsembedded/dd632975

  Thank you and best regards,

  John

• 5.0.3 new installation of Windows 7 x 64 black massive flicker!

  New MacBook Air on OS X with Intel HD 10.8.4 5000. Installed VMWare Fusion 5.0.3 and import a virtual machine since version 3.1. Install a new copy of Windows 7 x 64 as from a physical device. Here's a video (attached) of what the screen whenever the mouse passes over the top of the VMWare window, with the old and new installations of Windows. Note that it is not a problem when VMWare is not the active window, and the flicker follows the mouse vertically.

  So far, we have tried

  • Disabling 3D acceleration
  • change the mouse pointer
  • VMWare running in troubleshooting mode
  • VMWare update
  • relocation of the VMWare Tools
  • check Windows Update for a new video driver
  • VMWare running with compatibility of version 3

  Found the solution in this thread: scrapie form with merger 5.0.3 on no later than 2013 (Haswell) MacBook Air

  Must manually edit the .vmx file and add the line mks.vsync = "1" "

• Error code: 8007000D when running Windows 7 on a Lenovo 200 - Windows Update is not running automatically.

  I'm running Windows 7 on a Lenovo s 200 and Windows Update does not run automatically.  I manually installed the preparation tool to update Windows (KB947821) and KB978258 but no fix has worked.  Any help would be appreciated

  0X8007000D ERROR_INVALID_DATA

  Suggestion: 8007000D - Error_invalid_data.  Corruption in the folder C:\Windows\SoftwareDistribution.  Rename the folder % windir%/Softwaredistribution.

  TaurArian [MVP] 2005-2010 - Update Services

• Version OEM Dell off of Windows 7 on a Lenovo laptop

  A month ago, I bought a copy of Windows Home Premium from a Web site selling Dell OEM DVD because it was cheap. They don't advertise that the software was software OEM; I found out about it after that it was delivered. My laptop is a Lenovo SL500 but I thought that I could install the OEM Dell version anyway and then install the Lenovo drivers and finally, make a RAM upgrade. Everything worked fine with laptop Windows 7 newly connected after upgrading RAM. The system now says that my version of Windows is not genuine. When I go to the Microsoft support website and run the ActiveX control to locate the product id, it says my product id are not supported in my country of origin.

  What I don't know is if its due to the RAM upgrade or because installing a Dell OEM of Windows version on a Lenovo laptop is not allowed. Also, I would like to know if there is any recourse? Please notify. Thank you!

  Here are the results of the genesis of Microsoft Adv. Diag. Tool:

  Other data-->
  Office details: {190EF3BD-9B62-4007-ADFD-4CFA624895E4}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1867733954-2651067566-1353673874LENOVO 2746CTOLENOVO6AET64WW20101201000000.000000 + 000B0443607018400F804090409Time(GMT-05:00) Standard is03LENOVOTP-6a 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-1982012
  Installation ID: 019384240831735763415741638054822540467921820603589921
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: Notification
  Reason for the notification: 0xC004F07C.
  Remaining Windows rearm count: 3
  Trust time: 16/08/2012-22:07:01

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 7:17:2012 22:34
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OAAAAAEABQABAAIAAAACAAAAAgABAAEAln2aa9GMDJCo8OQsen9glNB5ZD/A9tSn1F9CBJDNRso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP - 6A
  FACP LENOVO TP - 6A
  DBGP LENOVO TP - 6A
  HPET LENOVO TP - 6A
  BOOT LENOVO TP - 6A
  MCFG LENOVO TP - 6A
  SLIC LENOVO TP - 6A
  CO-SUBMISSION LENOVO TP - 6A
  LASRYVITRAGE LENOVO TP - 6A
  GSCI LENOVO TP - 6A
  SSDT PmRef TP - 6a

  This isn't fully WGA report... it would help if you post the entire thing...

  However... the key that you got is cannot be used with the exception of dell machines.  These keys are not yet legally for sale.

  I demand a refund from the seller.

• Why I can't install windows XP on my lenovo 3000 N500 4233-53U?

  Hi everyone I need help, why I can't install windows XP on my lenovo 3000 N500 4233-53U? When I boot on win XP and after he load some files it still stops & it become blue screen? Thank you...

  Hello, has the same task these day´s. This is my solution.

  1. create a custom Win - CD installation with nLite, www.nliteos.com and
  include Win Service Pack 3
  2. change the Bios setting from AHCI to IDE harddisk
  (Native WinXp doesn´t truly support AHCI Mode)
  3. when the installation of XP is complete, download and install the "Intel Matrix Storage Manager Driver for Windows XP, Vista (32 bit) - ThinkPad" http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70477
  Follow the instructions "If you don't have a floppy drive...". »

  If this does not work with the step 1 and 2 and that you still have a blue screen during the installation, including the drivers of your installation of nLite CD

  Currently, there are problems with the download of the drivers on the Lenovo site...... so if you can not download the driver package... send me a message I´ll send you it by e-mail.

  Best regards
  Christian

• Windows 7, update services does not work

  I have a problem to update software in windows 7.

  I have a HP G72 laptop.

  I replaced my hard drive. 350GB, Western Digital 750Go digital West.

  -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

  The new disk hard there however any possible updates of windows. (the bar is red on the left).

  -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

  -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

  -Checked the status of services: windows update is statred and in automatic mode.

  N ' tried microsoft 'Fix - it' no results.

  -updated the drivers intel, no results.

  -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

  Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

  Do a clean boot, without result.

  Does anyone know a solution to this problem.

  Thank you.

  Ed.

  Windows 7, update services does not, RESOLVED.

  The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

  For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

  Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

  Good luck to solve you yours it took me two weeks to find it.

  Ed.

• Where to find the key of Windows 8 on DVD Lenovo?

  Hello!

  Recently, I had problem with booting and installing Windows 8 via the Lenovo installation DVD. I downloaded Windows 8 Microsoft Official site and created the bootable USB key.

  My Windows 8 is still not activated, because I can't find the key on the cover of the DVD or DVD itself. I only got the number P/N on DVD.

  How to find a key on my Lenovo Win8 DVD's? Maybe it is recorded somewhere inside files on DVD?

  Any help appreciated.

  I found out I got the DVD, Lenovo were only Windows 8 drivers and no OS. Therefore, there is no KEY to be found.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 Ultimate Service Pack 1 (64-bit) will not download completely stuck at 95%

  I tried to install Service Pack 1 of Windows today on my laptop.  On one of my laptops with Windows 7 Home Premium 32 bit operating system Windows Update downloaded (with 4 other updates) in about an hour and installed successfully during the shut down and restart.

  However on my laptop main used with Windows 7 Ultimate 64-bit Service Pack 1 stops downloading (although he says he always download or seems to be) to 95%.  The first time that I tried to download with 3 other updates to Windows, and it stuck.  I finally stopped after about 7 hours with it stuck at 95%.  Isolated, the other downloads and downloaded and installed after the reboot and did it in less than 15 minutes.  Then began to try to download only the Service Pack 1.  It has now been underway for six hours and is still stuck on download of 95%.

  Another forum on the web had a message that the Service Pack 1 with Windows 7 Ultimate 64 bit will not download if you have installed language packs.  (Those who took me about 3-4 days to install and download due to make them one at a time because as a group they would get hung up.)  So I hope that I did not remove the language packs to get this Service Pack 1 installed on this machine.  I hope that Microsoft would have tested on a computer in Windows 7 Ultimate 64 bit with language packs installed but maybe not...

  
  

  I HAVE THE SAME PROBLEM. I GAVE TO MY VISTA NOW, I HAVE JUST AS MUCH TROUBLE I DID BEFORE.  ABSOLUTELY, NO DOWNLOAD FROM ANYWHERE.  I WOULD BE HAPPY TO RETURN TO XP.  DEE

  I feel for you Dolores it was extremely painful and tedious experience.  The final fix for my computer was going back to the origin by default with Windows Vista Home Premium on my computer.  Then load the software Windows 7 Ultimate.  Then the installation of updates about 100 + Windows which took place including Windows 7 SP 1.  All this has been done before loading another software (except Firefox and Chrome) on my computer.  I did it too before my security software loading, which – incidentally, roughly double the speed of downloads and other features of the computer.  Then after all the updates for Windows 7 has been done, I loaded with Microsoft Office Applications and its many updates.  After that I loaded my security software and checked for viruses.  Then rebuilt all the other features, software customization, etc. of this computer.  Literally, it took over a month to return to the same functionality that it had before the Windows 7 SP1 crashed the computer.  All I can say is thank God that I am religious about backing up files and folders, so I think I got about 95% of my files, folders, etc.

  Since the reconstruction, I didn't "major" problems with Windows 7, but I cringe when I update Windows 7 via their process of updating every Tuesday.  I also try to update not updates at the same time or too large sizes in the updates, even if it takes more time to do it this way.  I also reboot after each update whether necessary or not.  I run two registry cleaners different at least once a week, or even more often as since the failure of catostrophic SP 1 of the operating system.

  I will say this though, a lot of programs/software, I had that wouldn't work with Vista, all of a sudden work again with Windows 7.

  Good luck!

• Windows Task Scheduler service is automatically get disabled

  Could someone can let us know the resolution of this issue that windows Task Scheduler service is automatically disabled minimum once a day, OS is 2003. Thanks for posting so any resolution.  Thanks, Chavigny.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server.You can follow the link for your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/