Windows Embedded Standard Service Pack 3
I use Windows Embedded Standard Service Pack 1 in my pos machine. I want to install a new application that is supports only Windows embedded standard service pack 3. I am trying to get the service pack 3 for windows embedded standard.
I can't find something. Is it available?
Please please someone help me.
Hi Omar,.
Since then, the query is related to Windows Embedded Standard Service Pack 3 installation. I would say that contact their support site to improve assistance:
http://TechNet.Microsoft.com/en-us/windowsembedded/dd632975
Thank you and best regards,
John
Tags: Windows
Similar Questions
-
LabVIEW Runtime engine on Windows Embedded Standard 7 P 32 / 64-bit?
Any who tried never to install and run the LabVIEW Runtime Engine (2011 or later version) on Windows Embedded Standard 7 P 32 / 64-bit?
I'm trying to figure out if this will work, for example on a CX5120 PC Beckhoff embedded. I have to have some TCP/IP communication simple to exchange information with another PC, but nothing else, i.e. drivers, etc...
I hope that someone tried to do already. I don't have the right equipment now to check it out.
As NEITHER sells touchscreens with WES7 installed here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210551 it's pretty safe to assume that they used the RTE on WES7.
But yes, it is done.
-
I have more than 10 thin clients with Windows Embedded Standard 7 with IE8. We are running a web application that crashes with IE8. I tried the upgrade to IE9 or IE10, but during the upgrade process, it stops and fails to install. I also tried installing various other browsers such as firefox and chrome, but they fail during the instalation.
Is there a limitation with the installation of other browsers or IE upgrade with windows embedded standard 7?
Hi Billy,The question you posted would be better suited in the MSDN Forums. See the link.Hope this information helps you. -
Windows XP Professional Service Pack 2 CD
Hello
I have Windows XP and try to use the regional and Language Options to 'Install files for the languages of Eastern aZion.' However, I said that I need the CD of Windows XP Professional Service Pack 2. It gave me this computer and do NOT have the CD. I also read that "Windows XP Professional Service Pack 2 CD" is not good and I need Windows XP Professional Service Pack 3. I need advice, I need to buy Pack 3 oou should I download it? I'm really confused.
The SP2 and SP3 are .exe files, then download and burn each Service Pack for its own CD.
Windows SP2 download (WindowsXP-KB835935-SP2 - ENU.exe)
http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=enWhere to download the SP3 Setup file:
(The file is large but only installs the components required by your PC)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=enNever be afraid to ask. This forum has some of the best people in the world to help.
-
How long windows xp with service Pack 3 continue to get help
Windows xp with service Pack 3 will continue to get the updates and supports after the deadline next Windows xp with service Pack 2.
Extended support for WinXP SP3 ends April 8, 2014. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3. I don't know how to solve this problem. Thank you.
Hi torito63,
Error 0X737D while updating Windows means that a previous update of Microsoft SQL server does not complete the installation.
To complete the installation, follow the steps below:
1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
2. Select Microsoft SQL Server 2005 and then click on edit.
3. from currently installed programs, select Microsoft SQL Server 2005 and then click on edit.
4. in the selection of the components, select database engine and then click Next.
5. in the maintenance of function, select database engine and then click Next.
6. in the installation of Microsoft SQL Server 2005, click Next.
7. in the System Configuration check, click Next.
8. change or remove an Instance, click on complete the suspended installation.
9. by error and usage report settings, click Next.
10. in the ready to update, click on install.
11. in the course of a configuration, click Next.
12. click on finish.
For more information, read the messages in the thread titled I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this?
Check if it works for you. Post back and we do know.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
-
Download for Windows XP Professional Service Pack 3 .iso?
I searched microsoft.com for the download links for Windows XP Professional Service Pack 3 .iso so I can complete on my old desktop Windows XP Professional installation instructions. Unfortunately, I could not find the file or the file itself. Is anyone able to provide a link to the file?
The link doesn't seem to want to work more. But the link posted below someone seems to work:
Microsoft Update Catalog
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=SP3%20XP%20%20%20%20%20%20%20%20
-
When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.
I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation. Everything suddenly it asks for windows professional service pack 2 CD. where I go to get this information from?
Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.
Thanks for your response.
Luke
See this link from a previous thread for advice and information.
-
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941
The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.
Also, tried installing IE8 on one computer and run windows update, same error.
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.Also, tried installing IE8 on one computer and run windows update, same error.
Relax and breathe.
FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.
You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:
Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Download at least Internet Explorer 7 (if it is not Internet Explorer 8).
Install it.
Reset.
Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.
Back - let everyone know if it worked for you.
-
Windows XP Pro, Service Pack
Reloading Windows XP Pro, 2002 moose.
Should I load SP - 2 first, then Service Pack 3?
Are you sure SP-1 not necessary, States of your website http://support.microsoft.com/kb/322389 SP-1 must be loaded, SP-2 then, SP-3.
Please confirm.
Thank you
To avoid confusion and duplication of effort, please post a follow-up later all replies to your original thread, Paul => http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-xp-pro-service-packs-12-and-3-down-load/b422d601-9646-49c2-bd95-363dcb914b0b
-
Windows XP 2002 service pack 2 does not have internet explorer 7 or 8.
Recently, I took out my old laptop. Windows XP 2002 Service Pack 2. I was using internet just fine, then when I went to a Web page (don't remember now).
He said that my computer needed update to IE 7 to the support page. I tried to load this (update) over and over again withno luck. Then I lost internet all together. He said it was impossible to load it and said to go to www.//go.microsoft/fwlink/?LinkID=106440. This address has not yet been loaded.I did extensive research on the question/answer of windows page.What can I do to make it work again? I still have a lot of memory etc left on the computer.The biggest problem is that I have NO internet now on this old PC, to do something about it. I use my laptop more recent to askThis question.Thank you for your help :)JenniferHello
1. do you get an error message?
2. what happens when he tries to open Internet Explorer?
You can perform the steps mentioned in the link below
How to troubleshoot network connectivity problems in Internet Explorer
http://support.Microsoft.com/kb/936211
You can check this link:
Windows wireless and wired network connection problems
It will be useful.
-
Need info on installation of Windows xp on windows 7
I have a laptop dell inspiron 14r n 4110. in which family Windows 7 premium preinstalled. I want to install windows xp professional service pack 2. is it possible or not? If possible then how? Please tell me.Go to the Dell support web site and search for the Windows XP drivers are available for your specific model number.
Using your Dell's Service tag number is the fastest way to get the correct drivers.
http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=GenIf there is then Windows XP Download drivers to a folder on your hard drive and install all of them.
starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, USB, Audio, Etc., and so on.If there is no driver XP not listed then you model does not support XP, you can watch mode "XP".
===================== Windows XP Mode ====================================
How to install and setup Windows Virtual XP Mode in Windows 7:
http://www.SevenForums.com/tutorials/8247-Windows-XP-mode-install-Setup.htmlNote: XP mode requires either Windows 7 Professional, Windows 7 ultimate or Windows 7 Enterprise.
Note: If you have Windows 7 Home Premium, look at the "Anytime Upgrade" options--------------------------------------------------------------------------------------
Create XP Mode for Windows 7 home & Vista Versions
http://www.howtogeek.com/HOWTO/11060/create-an-XP-mode-for-Windows7-home-versions-and-Vista/--------------------------------------------------------------------------------------
Windows XP Mode now accessible to more than PC
http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx
(Windows XP Mode will no longer need technology hardware to run virtualization)-------------------------------------- Anytime Upgrade -------------------------------
Upward to a more powerful edition
http://www.Microsoft.com/Windows/Windows-7/get/anytime-upgrade/Home-Premium.aspxUpgrade to another edition of Windows 7 by using Windows Anytime Upgrade
http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade--------------------------------------------------------------------------------------
Installation and use of the XP Mode in Windows 7
http://Lifehacker.com/5245396/set-up-and-use-XP-mode-in-Windows-7Install and use Windows XP Mode in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7#section_3Virtual Machine Manager: Frequently asked Questions
http://TechNet.Microsoft.com/en-us/SystemCenter/VMM/bb871039.aspxBefore installing XP mode:
Control Panel of configuration/programs & features/Turn Windows features on or off / Windows Virtual PC: 'ON' before installing XP mode
Have no security "Enabled" when you are prompted during the installation.Also:
http://www.howtogeek.com/forum/topic/virtual-XP-cant-be-created-as-administratorWindows Virtual PC evaluation guide
http://TechNet.Microsoft.com/en-us/library/dd744684%28WS.10%29.aspxXP Mode Alternative - Virtual Box from Sun:
http://www.VirtualBox.org/Microsoft Virtual PC vs Sun VirtualBox
http://www.vistaclues.com/Microsoft-Virtual-PC-vs-Sun-VirtualBox/Install Windows 7 on Virtual PC VirtualBox vs
http://www.brighthub.com/computing/Windows-platform/articles/29183.aspx=========================================================================
J W Stuart: http://www.pagestart.com
-
I need a "windows XP Professional service pack 3 cd" to replace a DLL file? where can I get this? He came not to this pc purchase.
Of
http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-Windows/
Windows XP and Windows 2003
To enable the display of Hidden files follow these steps:
- Close all programs so that you're at your desk.
- Double-click the icon for my computer.
- Select the Tools menu, and then click Folder Options.
- When the new window appears, select the view tab.
- Put a tick in the box display the contents of system folders.
- Under the section files and folders hidden , select the radio button Show hidden folders and files.
- Remove the check mark from the Hide extensions of known file typescheck box.
- Remove the check mark from the box that Hide protected operating system files.
- Press the apply button and then the OK button and shutdown my computer.
- Now your computer is configured to show all hidden files.
Now, go to this site:
C:\Windows\System32\dllcache
See the missing file by accident? If so, it can probably be safely copied to this location:
C:\Windows\System32
Oh, and what's the name of this file? And what is the make, model and model number of your PC?
-
I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer
See you soonThe site is authentic. You have two options when you do your relocation:
Method 1
- Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
- Reinstall Windows with your original Windows XP CD.
- Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3. Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.
Method 2
- Download SP3 from the Microsoft site and it wake to your Windows XP CD.
- Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.
The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP. If this seems too daunting then use method 1 to install Windows.
Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs. While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation. You can create the SP3 cd now and do it ready and at hand for future needs.
John
-
Update windows XP with service pack 3 evil - the updatebr.inf file is invalid
original title: update windows XP without service pack 3 problem
When the download of service pack for Windows XP, I get an error "the updatebr.inf file is not valid" Please help?
Hello Karla Sawchuk,
Thanks for your post. Take a look at this thread for a possible solution to this problem TechNet.
See you soon
Maybe you are looking for
-
That is the antivirus soft is best for ios9?
MY Bank suggested I have an antivirus application installed on my iPad 2 Air before using it to access my bank account. What is the best?
-
I am running Windows XP sp 3. Maybe it's a matter of HP, but I wanted to check with you first. Area of the image has worked at a given time. I have not used for some time and now when I tried, I got the above message. Thank you
-
I can't send anything I get this error message. Thanks to all who can help.
The connection to the server has failed. Topic "backpack".Server: 'smtp.comcast.net '.Windows Live Mail error ID: 0x800CCC0EProtocol: SMTPPort: 25Secure (SSL): No.Socket error: 10013
-
Boyfriend computer formatted with the illegal version
Back there, I had a great work Toshiba Satellite with a legal version of Windows Vista, don't back up drive. Then a few months ago my boyfriend thought he could do me a favor, as I was to get groceries and install its version of Windows 7 (which is l
-
Order BGP prefix-lists and maps-
General question about BGP. Taking this config: 1.1.1.1 neighbor prefix-list MY_PREFIX_LIST in 1.1.1.1 neighbor MY_ROUTE_MAP route map in MY_ROUTE_MAP allowed 10 route map the local 110 AC value IP-list of prefixes MY_PREFIX_LIST seq 5 deny 2.2.2.2/3