Zoom to the curved double windows

Similar Questions

• Dell Inspiron N4050 window 7 Home Basic Edition, sometimes he just Zoom in the page and task unsolicited

  I bought Dell Inspiron N4050 window 7 Home Basic just 2 months ago and since then had the Touch-pad problem, it takes a step that I must return to the dealer, I bought and they re - install back to the factory setting but the problem persists. This problem occurs most when charging the battery. Sometimes he just Zoom in the page and the unsolicited task etc. and this is very irritating. Pleas, help me... Thank you

  If the donor set it back to default settings and you still have this issue, I would take it back to them and tell them to set.

  I hope this helps.

• The installation of zoom on the camera of my curve 8250 blackBerry smartphones suddenly does not work...

  Zoom seems to be stuck at close to the top, the "scroll" key has no effect.

  8520. not 8250.

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try your zoom of the camera again.

• Is it possible to increase the size of the window of the CURVES?

  Hello

  I use LR 5 and love the CURVES tool.

  But I find it a bit small... is there a way to increase its size or even to send it to a monitor of many others?

  Ideas?

  Thank you!

  WITHOUT even dragging the wider Panel does not change the size of the box of curves, it puts just more gray space on each side.  I agree it would be nice if the box to expand when you change the size of the screen.

• With the help of Windows Live Essentials Screensaver

  Recently I have re-installed Windows 7/64 through the recovery partition on my model of HP Pavilion p7 - 1070 t

                                      
  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: Intel (r) CPU of Core i3-2120 3.30 GHz, Intel64 family 6 model 7 Stepping 42
  Number of processors: 4
  RAM: 6050 MB
  Graphics card: Intel HD Graphics, Mo-1988
  Hard disks: C: Total - Mo 703947, Free - Mo 638315; Total D: - 11353 MB, free - 1386 MB;
  Motherboard: PEGATRON CORPORATION, 2AC2
  Antivirus: Norton 360, updated and activated
  I had been using the Live Essentials screen saver before the re-setup, specifically the "Pan & Zoom" function, but now it is not available.  To access parameters, I am limited to a consecutive display of photos chosen by me, but without transition effects: poster photo for x number of seconds, then simply flicks and the next photo simply move on.  The words "this computer's video card can't play themes" obviously has something to do with it.  Any suggestions?  Apart from that, everything on my system works fine, and the device manager says the same thing.

  Hello

  This problem occurs if the graphics score card (Windows performance index) is lower than 3.0.

  I suggest you follow the provided methods to solve the problem.

  Method 1: update the Windows Experience Index Score.

  Follow the steps.

  a. click the Start button.

  b. open the Control Panel, click system and Maintenance, and then click Performance Information and tools.

  c. click on update my score. The evaluation will run for a few minutes.

  d. after the assessment is complete, open Windows Live Photo Gallery screensaver settings page to see if themes are enabled.

  If the problem persists, I suggest you follow the method provided.

  Method 2:

  a. Click Start, type Regedit.exe , and then press {ENTER}.

  b. navigate to the following location:

  HKEY_CURRENT_USER-Software-Microsoft-Windows Live-Library------slideshow

  c. double-click WinSATScore, select decimal, and set the data value to 300 (or more).

  d. quit Registry Editor.

   

  Note: Follow the steps and check if the problem still persists.

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  If the problem persists, I suggest you send your query on the Windows Live Forum.

  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• Hi I need to know how to expand the curves adjustment Panel. For example, the curves that I need to enlarge the graphic part, so I could show on a screen at the school. Thanks, Phil

  Hi I need to know how to expand the curves adjustment Panel. For example, I need to enlarge the graphic part so that I can view on a screen at the school and work from this Panel to expand. Thanks, Phil

  You can not. At least, not directly Ben Photoshop. For example, this can be done in Gimp and Photoline, and I had hoped that developers of Photoshop team would have done this allowance now. But no, we're still stuck with a tiny curved panel, which is a real shame, because in other applications, the user can be more precise with the curves.

  If you don't need to show close-ups during class time, use Zoomit in Windows, or turn on the Magnifier in the accessibility on a Mac option.

  https://TechNet.Microsoft.com/en-us/Sysinternals/Zoomit.aspx

• iOS 10 zoom causing the shift & blocking problem

  Hello

  I have several devices running iOS 10 ranging from a 5 iPad iPhone mini 4, to iPhone and iPad Air 2.  I noticed that when the zoom toggle in the settings is enabled (whether zoomed or not), I feel an enormous amount of lag, tactile and inaccurate affecting blocking problem.  No matter if I am completely zoom in or zoom out (double-tap with 3 fingers), a simple navigation creates all sorts of problems for me.  I will describe a few questions I meet below. ;

  (1) contact command will be sometimes not.  Even simple measures such as scrolling through the different pages on the homescreen to pinch to zoom in the image and Safari have problems

  (2) when zoomed in, many times, my button are inaccurate.  For example, a major problem that I have is that in the mail application.  If I drag to the left to remove an e-mail, I get sporadic movements.  In most cases, I have to slide slightly to the right of the line to do a full sweep.  In other cases, sometimes touching a button like 'OK' or by pressing another button would not register.  I may support slightly above, below, or around her to enroll.  It is extremely annoying.  In particular, I have this problem with my iPad 2 Air.  I'm leaning towards it being a defective scanner.

  Please note that when the zoom toggle is set to off in the settings app, I have no problem with delay or lack of response.

  Anyone else have this same problem?

  I'm having this same issue. Both on my iPhone and my iPad. The two running iOS 10 for now. The problem is not related to iOS 10 in my opinion, because I had this problem for awhile now.

  Affecting the zoom toggle OFF makes the question to go far, but of course that's not the solution. There is a reason why I need this feature to zoom. Deactivation of the zoom feature makes it very difficult for me to use my iPhone and iPad in some circumstances. So, I find myself constantly switch the zoom feature and LEFT. Very annoying. I hope that we will have a fix for it any time soon.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Why are the images in Windows Live / Skydrive photo albums not visible?

  The icons are gray.

  The photos are visible with IE9.

  Have you checked other possibilities in the article?

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  You can also try to 'Reset all the preferences for the default user of Firefox' at the start of Firefox to solve the issues in Safe Mode window.

  • http://KB.mozillazine.org/Resetting_preferences

• Tecra M2 mapping of the keyboard in Windows 2000

  Hi all

  I have a Tecra M2 on which the WinXP was removed and replaced by a new installation of Windows 2000 SP4 (I prefer not to go into detail as to why this took place).

  My problem is that the keyboard mapping is not correct under Win2000, for example if I press shift + 2 I get a @ and not a '. '. The problem exists with almost all the characters of Maj (' |,-,', ~,', ', @, #, etc..).

  Note that I don't use any software that remaps the keyboard.

  Does anyone know how this bee fixed?

  Thank you very much

  Hello

  I have the same problem on my laptop, but I don't have time to look at the problem until I saw this ad...

  Here is the answer for Windows XP, I guess it's the same for Windows 2000, because the systems are similar.

  Under start/setting/control panel, you will find the icon "regional and Language Options". Double click it and you get a new window. Select the folder "Language" then "Details". A new Windows pop up and from there you can select 'Add' services 'install '. Select your language to enter the menu drop-down, then click on 'OK '. Ensure that the value "default input language" is correct, then click 'OK' and click on 'OK '.

  Normally, the operating system needs to restart to set the hardware!

  Your keyboard should work correctly after the next system startup.

  Let me know if it works for you

  Rusty

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• Error in the Interactive execution window kills CVI

  Consider the following code:

  #include

  Double y;

  y = cosh (1000.0);

  (Properly), it gives an error ERANGE. If this code is executed in the interactive performance window a popup appears the recoverable run error at the time of the declaration. So far so good...

  However, if you choose now, select 'Continue' in the window of the ICB complete disappears from the screen - the only chance to continue is to use the taskbar icon and select "close this window". This farm CVI. Quite boring.

  Note: If the window of the contained source code modified code not saved, the changes are saved without asking. Usually, if I want to close CVI I wonder that if I want to save changes - obviously, the taskbar icon does not ask...

  Hello Wolfgang,.

  Thanks, as always, to report bugs and suggestions on how to improve LabWindows/CVI. I studied the issue and has been able to reproduce. I wrote a CAR for her, id #438733. I might suggest two workaround solutions: right click on the taskbar of the CVI button and select 'Show windows' or turn off the "Hide windows when the application is running.

  This bug seems to occur in older versions of LabWindows/CVI, and it is indeed annoying. It should be fixed in a future version of LabWindows/CVI.

  Best regards

  Nelu F. | National Instruments.

• I can't install the drivers in Windows 8

  I installed Windows 8 Developer preview but I can't install the drivers, even in compatibility mode. They were fully compatible with Windows 7. It's really disturbing, because I can not connect to the Internet and to develop applications.

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  From the download page:

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Given that Windows 8 has not been released yet not all drivers will work with him. Some drivers are very precise on the version of operating system, you may need to wait until the manufacturer releases Windows 8 drivers (if they make it to your model).

  If the compatibility mode option does not work, some drivers may be available by using Windows Update.

  Troubleshoot Compatibility
  This can help with some (but not all the) programs/drivers:
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in Windows 8.

• This update of the 7 week window do not work

  This week I have 3 update for Windows 7 pro, but ther are not working
  every time that I have try tell me to reboot is not to stop computer as update are installing
  evil
   
  Bring it to 14% so tell me it failed and goes back to the old ver of window before the update
  I try it a few times now with the same result, and once he scare the _ out of me like he jam just your job don't move any of this because of their update
   
  updated IE8 KB978506
  Windows 7 KB976972 update
  update of window 7 KB 977074
   
  something is very wrong with them to update

  Well I finally got the update no work - no thanks to window update - after is not bad some time I tried to download all 3 at the same time, but that did not work well seem ther love to be installed one by one - out further and it works after a lot of testing

  I've opened Incident of Service Support Microsoft online

  and here what ther me has said - but not a bit of it worked for me

  Microsoft online please contact the Support Service.

  From your description, I understand that there are 3 updates failed to install. If I misunderstood your concern, feel free to let me know.

  I understand the inconvenience that this matter has caused. Rest assured that I will do my best to help you solve this problem.

  This problem may be caused by the following factors:

  1. some third-party programs affect.

  2 corrupt Windows Update temporary files.

  In order to narrow down the cause of this problem and solve it, please refer to the following steps. After completing each step, please check the result again on the Windows Update Web site.

  NOTE: Some third-party programs can affect the Windows Update service. If you run third party applications such as web accelerators, Internet or Spyblocker (programs designed to improve the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend temporarily disable us or to stop and then try to access Windows Update later, please understand that we are disabling these programs only for troubleshooting purposes and we can re-enable these programs after that we finish troubleshooting.

  Step 1: Clean boot

  ==============

  This method will help us determine if this issue is caused by a loader program or service. Please, perform the following steps:

  1. click on the "Start" button, type "msconfig" in the search bar and press ENTER.

  Note:, please, click on continue if the "User Account Control" window appears.

  2. click on the 'Services' tab, check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).

  3. click on the 'Startup' tab, click 'Disable All' and click on 'OK '.

  Then, restart the computer. When the "System Configuration utility" window appears, please check "don't show this message or launch the system.

  4. check if we can upgrade the system to boot.

  Note 1: Temporarily disable the startup only, group prevents the loading at startup, startup programs. This should not affect the system or other programs. We always run manually these programs later.

  Note 2: We can check on start up Normal in the general tab to return to the Normal Mode after that we get this issue is resolved.

  If the problem persists, please continue to try step 2.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  ================================================

  This problem may occur if the Windows Update, software distribution folder was damaged. We can refer to the following steps to rename this folder. Please note that the file will be re-created the next time we visit the Windows Update site.

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Note: Please look at the cmd window and make sure that it is said that he was arrested with success until we try to rename the folder. However, if it failed, please let me know before you perform other measures and include any error messages you may have received when it failed.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this folder.

  8. still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates.

  Note: Please look at the cmd window and make sure that it says it has successfully launched. However, if it failed, please let me know before you perform other measures and include any error messages you may have received when it failed.

  If the problem persists, please collect the following information for further research.

  How to capture a screenshot

  ======================

  1 when the error appears, press print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my email

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  The file will be saved to your desktop. Please send the file

  Note: When you attach files to emails, the process will vary depending on the used e-mail application. While you compose the message, the most applications will provide you with a 'Join' button or paper clip icon click to attach a file. After clicking on this button/icon you need to navigate to the file you want to attach and select it by either double clicking on it or by clicking on it once, then clicking on the button "join".

  If please try my suggestion and let me know the results soon. If you have any other questions, feel free to let me know.