Crop and straighten Images settings

Similar Questions

• Crop and straighten Script Enhancement

  As part of my work dealing usually 1500 or more images from one day to the next, I use the script Crop & Straighten included with Photoshop.

  The script works fine most of the time, but it seems to choose random small pieces of images that are recorded and should be deleted.

  I would use a Photoshop script to close images in a certain size of file/size of pixel to say, so I can eliminate the image fragments out until they are registered. I tried to modify the other scripts and write my own, but I'm not a programmer and make me nowhere.

  I was wondering if anyone would be able to help.

  
  Thanks in advance!

  Do you have the automated process economy?

  If this isn't the case, Script below could be adapted to save all these images that are not below the comprehensive measures.

  In any case, something like that could be used to close the images below certain widths and heights without saving any changes:

  Close the files below certain width or height in pixels.

  Use it at your own risk;

  #target photoshop

  var theDocs = app.documents.

  var originalRulerUnits = app.preferences.rulerUnits;

  app.preferences.rulerUnits = Units.PIXELS;

  for (var m = theDocs.length - 1; m > = 0; m-) {}

  var theWidth is theDocs [m] .width;.

  var theHeight is theDocs [m] .height;.

  to close the files below some width and height change. à &&;

  If (theWidth< 1000="" ||="" theheight="">< 1000)="">

  theDocs [m] m:System.NET.Sockets.Socket.close (SaveOptions.DONOTSAVECHANGES)

  }

  };

  app.preferences.rulerUnits = originalRulerUnits;

• Try to line up and the image of the product turn to all air essentially uniform - what is the best way to do this in a jackpot?

  Hi all

  
  

  I recently did a photo shoot with about 150 different, but very similar products on a white background totally blown away. Each is turned a little differently and positioned slightly differently than others. I want all upward line them in the same place on the chassis so that when you view a catalog online page they appear uniform.

  
  

  What I come up with so far is to bring them into a photoshop file stacked in the layer, then slide guides where each corner should be (they are roughly square, but turned to a sort of diamond) and adjust each layer and turn to adjust. Subsequently I toggle visibility on each layer and save it in JPG format.

  
  

  Any thoughts on a better process? I have the creative suite together to work with.

  
  

  Thank you!

  Without some of the images to test, the following is offered as a possible solution that spin, align and Center the image. It's the strategy:

  Write an Action that will be:

  1. open the file and garbage of the lock.

  2 Cmd + click click the new layer in the layers panel to place a layer underneath the product.

  3. return to the upper layer and double-click it in the layers panel to bring up the layer Style.

  4. in the section mixture if at the bottom of layer Style, move left until that disappears white blown in the illustration the high gray-scale slider to the right page. (It will be the same for all).

  5 layer > merge down (image precision silhouette is now a single layer and has a transparent border)

  6 file > Automate > Crop and straighten photos (since the skin is transparent, it will turn the picture. Selection not required).

  7. save the file

  Then:

  Load files into a pile

  Choose all layers

  Select the Options toolbar move and align on the center vertical and horizontal (or low) of each image

  Save layers as files

• How to get an original RAW image after cropping and openness RAW file?

  Hello

  I have a Canon EOS 350 d camera and now PSE 9.  I have taken a few RAW images & imported in PSE 9 OK.  I know that the original RAW image is preserved after the change.  However, after cropping a picture BRUTE of the editor and then "Open" and "save under" a PSD or JPEG, I then close the image in the editor and the cropped image appears in the Organizer.  This is as it should be, I think.  If I then want to start from scratch on the original RAW image, it seems to me that I have to manually remove the modified version and the .xmp file in Windows Explorer, and then double-click the RAW file in Windows Explorer, which then open correctly in the editor of PES 9 of origin.  Is this possible to PSE 9?

  When you open the original camera raw image, go to the context menu

  and choose default Camera Raw, which resets everything except the crop, straighten,

  and rotatate parameters.

  

  To get rid of the culture and/or straighten the settings, click on and hold on to the crop tool and choose the option clear crop.

  To reset the settings of Image rotation, you have the back turn manually using the image rotation buttons.

  

  MTSTUNER

• sequence right and export of settings in Premiere Pro CS6, video with still images

  I am trying to run a video on my site (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.

  This video is just 50 seconds, but when I have this turn in the format mp4, webm and ogg, get large files and the quality is not good.

  Could you please guide me to find good sequence and export of settings in Premiere Pro CS6 to get a video for the best possible quality on the web?

  A precise description of the parameters would be great.

  Thank you

  Silvia

  To export, set the resolution that you want to use on the web.

  Make the sequence of parameters in a way to export these settings

• How crop and save my image in layers?

  Hello! I would be grateful if someone could tell me how to crop and save the final image with I've worked on a lot of layers. I moved the guides on the edges of the image and want to register what is inside of them now. But he saves this medication what is on the screen ph.shop. Help, please!

  Thank you!

  Hi & Welcome to the forums.

  If you want to save something that is just within your guides, you can use the crop tool.

  Follow the instructions here: http://forums.adobe.com/message/4696690

• CS6 crop tool and the image disappears?

  I am new to CS6. Sometimes when I use the the crop tool, the picture I want to crop disappears from the display. Can not see where to place the crop so I end up with a blank screen/window. When I click on another tool, a window pop up asking me if I want to harvest? To which I click on the button 'not fit' and my image reappears. As soon as I click on the crop tool once again, the image disappears again.

  Why? What I am doing wrong? It happens not every time.

  Which sounds like you have a problem with video card driver (like a lot of similar positions in the general forum of Photoshop).

  Try to update your driver from the website of the manufacturer of the GPU video card.

• How to cancel a cropped and turned to ACR RAW images

  Can someone advise to return to the original RAW image once the image has been published in ACR.

  "Reset Camera Raw default" seems to do everything but undo crop and rotation of the image.

  How to cancel these or go back to the original unedited image?

  Thank you very much

  Delete the XMP files because they contain all never change instructions worn in ACR or other publishers such as Lightroom or Aperture.

  If you can find the CR2 file in Solution Explorer, right-click on it and select open with Photoshop Elements. It will automatically open in ACR. You can also use free software PLR that comes with canon cameras and has more tools than ACR.

• Sovereign CS5 and straighten tool

  I'm working on a large number of photos using the rule and straighten tool without any problem. Then, with no reason so that I can determine, although the images were always be straightened, they were no longer to be cropped out. I would appreciate if anyone has a solution for this. I know that I can always manually crop with the crop tool, but it's so much time.

  Thanks in advance.

  This is what will happen if you have now pressed the Alt key

  When you press the button to make it straight, so unless your holding alt or alt key

  is stuck or stolen by another program, reset of photoshop cs5

  preferences seems in order.

  Reset preferences in photoshop by holding down the Alt + keys Ctrl-Shift key at startup

  Photoshop and release the keys when a dialog prompts to remove the

  Photoshop settings file, click Yes.

  MTSTUNER

• Software Windows 7 and HP Image Zone

  I have a new Pavilion s5212y w/Windows 7 and a HP printer Photosmart 8450 that comes with the HP Image Zone software for image editing.  The software is not supported by Windows 7, will not be installed (tells me to upgrade op - sys).  Is there a work around for this or the software will be compatible with the new system?  Don't get me wrong, the printer works well, it's just that I can't use the software to edit photos before printing.  Thank you.

  I have HP Image Zone to work with Windows 7.

  1 login as administrator

  2. load installation CD.  Find setup.exe, do a right click, select troubleshoot compatibility.  Accept the XP mode.

  3. start the program.

  4. it takes some time to install the program.  Be patient.

  5 ignore all messages that the program may not have install correctly.

  6. once the program is loaded, click Next and save the settings.  Ingore the error messages.

  Once the program is loaded, you can copy the shortcut (s) of the Office of the administrator to other users or just create a new shortcut.

  Hope that works for everyone.

• Qosmio G30-154 and 155 - image Enhancement Utility does not work

  I read the

  wire https://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=21006
  as I have such a problem.

  I installed Picture Enhancement Utility and when I started the application I got an error

  * This application does not work on the current version of BIOS system * and stored program settings are not saved.

  My BIOS version is 3, 90 - WIN
  Y at - it the new vesion of work of image Enhancement Utility?

  Image Enhancement Utility came out for the Qosmio G20 series.
  For Qosmio G30 such utility is not out!

  I guess this is the reason why you get the error message: + "this application does not work on the current version of the system BIOS +.

• Satellite U400-112 - WoW problems and the image is not good

  Hello!

  My laptop is Satellite U400-112 and matching video Intel X 3100.

  When I play in openGL, 3D graphics on minimum and the image quality are not good. The same situation with Direct3D even worse. I have a guess - the game not installed, I copied the folder with the game on another computer, maybe I need to reinstall? I installed the latest drivers for the video of the official website of Intel.

  Maybe someone have the same problem and can help me to solve it.

  Hello

  This only happens on the world of Warcraft or in other games too?

  I'm a bit confused because you have set the minimum graphics and then you wrote that the photo isn't good in my opinion that's normal as the photo isn't good, if you play on minimum graphics settings.
  Maybe you can post a screenshot screen or something else.

  You also need to update DirectX version on your laptop that you can find on the Microsoft Web site.

• How to restore a picture to its original state? I've cropped and want a framing.

  Normally when I crop and press save records in a different document, so I still have the original.  Today as he registered under the same name so I lost my original image.  I can restore it to the original image or have I lost him forever?

  Normally when I crop and press save records in a different document, so I still have the original.  Today as he registered under the same name so I lost my original image.  I can restore it to the original image or have I lost him forever?

  ==========================================
  In general... If your original file has been overwritten (replaced) by the
  edited version there is no way to recover the original.

  What software did you use to crop the picture?

  If the software is still open... you could try to go to... Change / Cancel...

  Windows Live Photo Gallery archives (for example) a copy of the
  original file that you can return to but most editing software doesn't
  do not have this option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Emulator CVS displays bitmap color black and white images

  I use a VBAI2009 inspection on 1454 CVS which uses a camera firewire AVT Guppy F - 036C. This system is on a production machine inspect the product we make. VBAI uses the legacy IMAQ for IEEE 1394 on a CVS not the driver IMAQ-dx cameras. The VBAI script contains several steps function color inspection. To get the AVT camera to display the color, I had to install the files of MAX camera using the Bayer color tab because Bayer settings are not accessible from the driver on the CVS IMAQ. I'm no adjustment of the camera of the VBAI. This configuration works well and has worked for 6 months on the machine of production without any problem.

  Now, I need to edit the VBAI script but can't stop the machine to make the changes and test the program. I captured images bitmap using MAX during the inspection was installed 6 months ago and they stored on my host for just such an occasion. I am using these captured images and the CVS emulator in VBAI to make the changes to the program offline. I performed the inspection under the CVS emulator and the acquisition stage is configured to point to the captured bitmap images using the button Configure Simulation settings. The problem I have is that bitmaps are displayed as black & white in the emulator, even if these are images of color seen with paint. I can't find a way to fix this. Is - this problem as a result of using the parameters of Bayer to create the image color or something else in the emulator? The emulator, no installation of color image treats?

  Any help would be appreciated,

  Mark

  The stages of acquisition camera record video mode information used to acquire images. If you use these steps in emulation mode, it converts the type size and the image to match what has been gained for calibration and processing step use the same type of image. Looks like than the stage thought that the image was mono, even if you got it to be color. I will consider how it could have be saved incorrectly when you use the settings of Bayer. In the short term, you can disable the acquisition stage (don't delete so you do not lose the camera settings saved in step) and use a stage of acquisition of simulation or a new phase in the acquisition of 1394 and won't force the image size/type.

  Hope this helps,

  Brad