Satellite U400-112 - WoW problems and the image is not good

Similar Questions

• Satellite C850D-11 q - keyboard and the Touchpad does not

  The laptop is a little more than a year and worked ok until recently.

  Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

  He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

  Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

  Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

  Any ideas appreciated?

  Thank you

  Hello

  > Finally cleared the HARD drive and restored windows 8 only
  I hope that you created before Toshiba recovery disks you have formatted the system.
  Did you?

  The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

  > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
  Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
  That is why in most of the cases the keyboard problems could be the causes of physical problems.

  However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

  > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
  BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

  I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
  But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

  So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
  Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

• Try to burn images on a cd to make them playable on home dvd player. the computer will burn on the cd and the images will not play on a DVD player? any help would be great.

  Try to burn JPEGs on a cd in "master" mode to make them playable on standard dvd players. the computer will burn on the cd and the images can be viewed on another computer, but cannot be viewed on a DVD player? any help would be great.

  Hello Lackyboi,

  ·         How you try to burn the pictures on your CD?

  ·         What is the burning software CD that you use to burn the discs?

  I suggest you burn your photos using Windows Media Player.  You can read this article which will give you information on burning media with Media Player:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  1. in Windows Media Player, on the Tools menu, click Options.

  2. in the Options dialog box, on the devices tab, click the name of the reader of CD - R or CD - RW you use and then click on the properties button.

  3. in the Properties dialog box, under the recording tab, select a slower write speed.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• Satellite U400-112: impossible to format the local drive (damaged MFT?)

  Hello!

  I had a pretty serious problem with my HARD drive.
  250 GB HARD drive
  C: 116 GB - NTFS - Windows XP (Vista initially)
  D: 1, 5 GB - NTFS - (Vista Recover?..)
  E: 117 GB - RAW (was NTFS prior to crash)

  Local drive E: MFT have been damaged because of the virus attack (I hope not because of my madness!). It's NTFS, now it's RAW. I got all the necessary data partition with program ZAR, but all my attempts to recover or just the format E: remained unsuccessful.
  None of the defective sectors found on the HARD drive. Standard Windows tool to format the disks fails: 'it's impossible to finish the formatting of E:

  Before this problem with the E: drive, I had several problems with HARD drive. I have never divided re discs, to Partition Magic from the beginning he identified incorrectly. I tried Partition Magic 7 and 8.
  Link: [error screensaver | http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]

  The problem is that the special programs (I tried "find and Mount") also could not identify partitions to correct the defective MFT. I thought that low-level format can help me, but I heard, that the use of all applications for other producers can probably destroy my HARD drive. Are there only special applications of Toshiba developed for such cases? Or you can advice me something else?

  Thanks for your help!

  P.S. These applications did not help me:
  Find and Mount (can't find the HARD drive)
  Acronis Recovery Expert (does not find the HARD drive)
  OnTrack EasyRecovery Professional (does not resolve the error, but help to recovery data)
  HDD Regenerator

  Thus you get back all your important data?

  I would like to just launch Recovery to restore the HARD drive to its factory condition. If the recovery fails, you can try to delete the partitions with FDISK from a startup MS-DOS disk. Free bootdisks can be found at www.bootdisk.com

  FDISK can also repair a Master Boot Record by running this command: FDISK/MBR
  But it is not 100% reliable, it could cause more harm than good.

• Change the text and the images do not recognize a particular photo such that an object cannot therefore replace image

  All other photos are recognized as images. It has no higlighting and you get just 'Select All' when you right click, so it is obviously considered as text. The photo is not different from those who can be replaced. The photo is recognized as an object by the object Inspector that gives all the details.

  Thanks Bill & Michael. Yes, I would say that it is somehow connected to surround the text. I found a solution via the edit object tool. There were about half a dozen of these photos of problem in my book that had more than 100 photos. Although the text tools change & objects does not work, the tool change object Print production. Instead of an option to replace the Image, you get an option to change the Image, where you can change the resolution (which is what I wanted to do) via the Photo shop. So, even if we do not know the reason for which these photos with their text mГЄlГ surrounding, we now have a convenient way to solve the problem. Thanks again to you all.

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• Satellite C70D-B-310 - Webcam and the Microphone does not

  Cannot get my mic and the webcam doesn't work on Win7 64.
  Drivers are not available on the download section of Toshiba.

  That please?

  Toshiba Satellite C70D-B-310 PSCLEE.

  All the essential and necessary Win 7 64 bit drivers for Satellite C70D-B are available on the Toshiba UE driver page.

  The only webcam driver isn't available because AFAIK the Toshiba value added Package already contains the necessary driver to get the webcam working.

  The microphone part of the webcam and to be selected in the Panel? sound? Recording tab

• Absent from the bar spots and the screen is not good

  Original title: move screen up

  How can I move the windows screen?   Can't see my bottom toolbar?  There is about 1/2 space black above the windows open or even the windows page.   I have also two windows superimposed in facebook.   I can't click on the rear window to get rid of it.   When you play games farmville, pioneer trail, etc.  I have to click on things about 1/4 inch to the right of the object.   At the top of the screen is about 1/2 inch on top and to the left.   How do I get this all to move to adapt to the screen?

  Any help would be appreciated.

  I got the problem fixed with the double screen to upgrade my Intel HD Graphics Family.

  I use windows 7 on a HP Pavilian laptop g6.
  The only problem I have now is that I connect the laptop to my gateway FPD2275W TFT LCD Moitor as its bigger and easier to see.   Now on this gateway monitor I have space black above the scree so unless I do my toolbar on the largest background I can hardly see it.  I used for the button on the side of the monitor auto fit my picture and it runs for about 2 seconds and then it lowers the screen again.  I have the resolution set on this 1680 X 1050 monitor, which is the recommended setting.   If I liked I receive frequency out of range.
  All this began after I clicked on the key in google and went on google chrome and it updated something.
  Those that this isn't a big problem is possible to raise the screen on the monitor so that it is using the entire screen and not to leave about 1/4 to 1/2 black space at the top?
  Thank you for your help.

• I got a message "Firefox security" that my computer was full of viruses, asking if I wanted them to correct the problem. The address was not good as Firefox. I thought it was a fake. Anyone know?

  He could have said "Mozilla Security", but the address line was not Mozilla. I think it could be a new virus, so I didn't click on it. Today, it is the first time I saw it. My antivirus software is up-to-date and working.

  It will be a fake, there are malicious sites that use this method to try to get people to install malware. Mozilla does not search for viruses or send messages like that.

• Can't use the product key to install Vista on my Satellite U400-112

  HI, GOOD DAY

  I BOUGHT TOSHIBA SATELLITE U400-112, WINDOWS VISTA, I FORMATTED MY COMPUTER LAPTOP THEN I INSTALL WINDOWS VISTA, BUT WHEN I INTRED PRODUCT KEY (THAT OF THE LAPTP THUMBNAIL), A MESSAGE WILL APPEAR AND SAY THE P K IS NOT VALID!

  ALSO, MY WINDOWS VISA IS A VISTA ORIGENAL CD COPY, IT CAN BE RENEWED BUT DOES ' T ACCEPT MY LAPTOP PRODUCT KEY!

  WAIT FOR HELP, THANK YOU.

  Thank you for this return of experience and the posted answer! :)

  Good day!

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• Audio driver does not work on Satellite U400-112 with Vista 64-bit Buss

  Hello

  I installed Win Vista Buss. 64-bit on my Toshiba Satellite U400-112 but the original driver for the Toshiba site does not work properly, honestly does not at all. The only driver that works is a winner. Vista driver but when I plugged in her headphones just got pregnant shape, but there is no sound in headphones.

  Can someone help me, please?

  Hello!

  I have a Satellite U400 with Windows Vista 64 bit also, and I used the driver on the Toshiba site (Conexant 4.36.7.0).
  It works without problems, I can hear sounds with the speakers and headphones.

  Maybe you have an old BIOS. After the installation of Windows Vista, I made an update of the BIOS so try that too.
  The BIOS you can find also on the Toshiba site.

  Good bye

• Can satellite U400-112 - I switch to Windows 8

  Can I upgrade my Satellite U400-112 Win8?
  I have 4 GB of RAM and today I am running win7 Ultimate 64-bit

  Thank you

  Hello

  Visit http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and that compatibility of Toshiba with the list of all matrix them currently supported models of laptops.