! 00% CPU use due to Multiple Instances of WerFault.exe running on Vista SP2 computer

Similar Questions

• Multiple Instances of werfault.exe

  It is common to have 6 instances of werfault.exe runs?

  Hello Tom,

  Thanks for update.

  It seems that the problem is solved.

  However, if re-problem persists, you can run DISM.

  Please do not hesitate to answer, if you have any other concerns about Windows.

  Thank you

• Photosmart 7510 running multiple instances of HPNetworkCommunicator.exe

  I have several instances of HPNetworkCommunicator.exe being run, but only 1 printer configured.  An escalation manager HP/engineer? connected to my PC to help solve a problem that I had with Efax.  He used a tool of the scrubber and left all instances previous HP printers I had and then reinstalled the PhotoSmart 7150 software.

  Everything worked fine after that.  However, Windows did an update on my computer and after that I could not the scanner, no printer software worked (to check the ink levels, scanner, etc...).  Responsible for the escalation, said there are problems with Windows updates because after the update, Windows does not see the printer as a scanner and it is a threat to the network, so it disables the scan from the printer part.

  He has reinstalled the printer that a printer wireless and then scan will work again.  However, he had several (3) instances of HPnetworkCommunicator.exe running after that.

  I went into the control panel and saw 2 7510 s PhotoSmart configured, so I deleted one of the printers.  I thought that's why there are several instances of HPneworkCommunicator running, and delete the redundant printer would solve the problem.

  I rebooted and checked everything was working on the printer.  However, I have yet 2 instances of HPnetworkCommunicator running.  Is this normal?

  Hello

  It is normal to have more than one instance running at the time sime because of several communication actions occouring simultanly (e.g. alerts of ink. Front panel to scan, the device status, etc..)

  This is the mode of operation of the specific software version.

  If you see the affected PC performance, it's another story.

  For such a question, I would recommend you to set the alert of ink as shown below, restart the PC and check any changes:

  http://support.HP.com/us-en/document/c03191239

  If performance is still affected, also disable the front panel scan option.

  If the software does not affect the PC somehow, you have really not hae any reason to take action.

  Kind regards

  Shlomi

• The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

  My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

  * original title - why do I have two HpqPhUnl.exe race? *

  Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

  Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

  It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

  If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

• Multiple instances of rundll32.exe in Windows 7 Premium using all RAM - no viruses detected by MSE but PC runs slowly

  Processor: AMD Athlon (TM) 9750 Quad-Core 2.40 GHz

  4,00 (3.75 usable) GB RAM

  System: 64 - bit OS with Genuine Microsoft Windows 7 Premium (purchased separately with distributor online PC)

  At startup, there are three instances of rundl32l.exe with no path name Image displayed in the Task Manager.

  The three were separated from the PID of 1624, 1634 and 1644.

  None has an associated user name.

  Used private working memory is listed as 128K, 344K, 520K.

  Commit size is listed as 1, 036 K, 1 864 K and 1 940 K.

  List page 717, 1 731, and 2 044 defects

  Note that the following persons have no associated user name, until I log in as an administrator:

  Csrss.exe, nwsvc.exe, until I log in as an administrator, date at which all are listed as belonging to the user of the system.

  There are two instances of csrss.exe after I login as an administrator to monitor the system.

  Note that as soon as I open MSIE (worm: 9.0.8112.162421 64-bit Edition |) Update: 9.05 (KB2647516) | Encryption level: 256-bit)
  The use of the RAM dropped to 1.04 BG of the GB available total 3.75, jumped but still once 3.14 GB and the balloons of the use of network.

  as soon as I logged as administrator.  There are multiple instances open for svchost.exe attributed to the system, network and Local Service.

  Since I use MacAfee and Microsoft Security Essentials and have found a problem, I wonder if there is a virus that creates multiple

  run32dll.exe and this according to the capacity of detection of these two programs.

  You know, it's more difficult to follow all the news - just to get a response.  I've restored as soon as possible, has got rid of the programs and the remains, then reinstalled MSE and updated, and, Yes, the computer is updated and better now with the improvement of power, video card and without an easy way to trace this information (you know a feature of Windows that would follow easily everything you ask?) - it seems a big eater of real-time , for questionable results.  I thought that Windows 7 Ultimate would have included more administration tools just to log on and view, copy, paste, rather than the back-and-forth necessary to fill out a form that is as unique as it is not shoot all the tools.  I see that much info required users, and where is the forensic tools easy to use a computer owner should have?  Malware authors certainly use them.  The average owner must be at least as good a handle on reports on what's happening, everything down to the core.

  Any tips?

• Explorer 8 opens multiple instances of rundll32.exe when closing

  When I close Explorer 8, rundll32.exe opens multiple instances and memory in the Task Manager go to more than 800,000 for each instance. After running this ram computer and virtually lock up the computer. If I stop the process, everything works normally until I opens and closes Explorer 8. It is repeatable and consistent.

  I use Vista Business, 4 concerts, Dell Latitude D830. Rundll32.exe have searched and found only one instance... located in C:\Windows\System32. I ran several programs of virus and malware and can't find any problems. Register is also good.

  I had similar problems with changing app crash of video files in a folder list to views of large icons.  I sent a problem report and in return had a fix, I unfortunately deleted after it corrected my problem.   I had to go to the command promp
  and in C:\Windows\System32 I had to modify the command that has been something like the pointed out below.

  Fault Module name: Mpeg2Parser.ax
  I think that if you send an error report that you receive a solution.

  It's because of the problem I had.
  Product

  Windows host process (Rundll32)

  Problem

  Stopped working

  Date

  18/06/2009 15:58

  Status

  More information

  Signature of the problem

  Additional information about the problem

  Bucket ID: 376914080

  Problem event name: APPCRASH

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: Mpeg2Parser.ax

  Fault Module Version: 1.2.0.79

  Timestamp of Module error: 38e280dd

  Exception code: c0000005

  Exception offset: 00006210

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

• On the task bar of Windows Explorer post work without creating multiple instances of explorer.exe.

  Hi, I tried the workaround solution where you enter "%SystemRoot%\explorer.exe: {20D04FE0-3AEA-1069-A2D8-08002B30309D}" in the target.  However, this doesn't seem to be a full working solution because it creates an instance of "explorer.exe" whenever you access.  I want a solution that allows me to open the 'Workstation' of the taskbar that creates instances fallacious "explorer.exe" (it should stay onlya singleinstance of explorer.exe).

  BTW, no, I don't want to pin 'my computer' icon so I have to hover over windows Explorer and then proceed to my computer.  I want the default location in Windows Explorer my computer and no libraries (which had the idea to do this? this person is a fool, because the majority of people never use libraries)

  -Dan

  Another alternative - using a VBScript script to launch my folder on the computer.

  Copy these lines into Notepad and save the file as "MyComputer.vbs".

  Set objShell = CreateObject
  objShell.ShellExecute "shell: MyComputerFolder ', ' ', ' ', 'open', 1

  Create a shortcut to the script including the full path, as below:

  C:\Windows\System32\wscript.exe "D:\MyScripts\MyComp.vbs."

  Change the shortcut icon, and then PIN to the taskbar.

  How is it a better alternative?

  The script takes 3K of memory (max) and duly ends after launching the folder desktop. It's better than the original situation where each instance explorer.exe taking 20 + K of memory and not end automatically.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• multiple instances of ravbg64.exe

  After completing my process through my task manager, I found that I have about 5 instances of the same RAVBg64.exe running at the same time. I know that at least one of them are legit, but I don't know the others. Also, a lot of my steam games started having drops of solid chassis. Are these additional files virus?

  Sunbro

  This process is your realtek.  I'd install the most recent driver available, even if it is the same date because drivers become corrupt

  There are discussions quite a few issues in this driver.

  RAVBg64 . exe , Realtek HD Audio background process... who eats up to 13% of my system of 2.2 Ghz Core i7-2720 RtkNGUI64.exe.

• There are several instances of explorer.exe running in Task Manager (currently 7), each help between 10 and 40 MB of memory.

  Explorer.exe processes use resources cpu at different times.  I remember reading at the time that this could be a sign of a virus, but I did a full scan with NIS 2010 and nothing showed.  Can someone give me pointers where to begin to investigate?

  I did a clean install of Windows 7 Friday last-formatted disk HARD and everything, so he didn't have much time for something bad to happen!

  I discovered what is causing the explorer.exe hang... If you give ALL the arguments for explorer.exe in your shortcut/properties, to try to change the default of libraries directory, it crashes.  For example, simply using "explorer.exe C:\. "will cause a task explore hang whent you close it... to crash, I mean the window closes, but the process remains in memory.  I had 15 tonight explorer.exe...  There is advice on the net on how to get the default Explorer for workstation (which I have been using this trick - I HATE default libraries which I NEVER use)... so change your shortcut and remove all the arguments for explorer.exe.  See if it suits it!

  As expected, the support has no knowledge on what I see.

  PS - I just understand how default Explorer for workstation... Its strange, but it works...  Click right drag the icon from your desktop on the desktop on an empty space.  Create shortcut...  Now detach any Windows Explorer, you have in your taskbar... Now left click, drag your shortcut from the desktop to the taskbar.    Now, if you simply click on it, you go into libraries... BUT - if instead you right click, you will see the shortcut from the desktop and select this option, it goes into my computer... and there's never hang out of any EXTRA explorer.exe!

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Use of multiple instances of the same browser...

  Hi people,
  
  I have a question...
  I inherited a large APEX application, it uses Oracle SSO to log.
  
  We are migrating the application to a new set of servers and run regression tests.
  Testers are connecting using IE6 and multiple instances of the application both on the oldTest newTest servers and opening.
  
  If at some point, you can:

  an application Admin user (username ADMINTEST123)  logged into the application on oldTest
  an application Admin user (username ADMINTEST123)  logged into the application on newTest
  
  an application standard user (username TEST123)  logged into the application on oldTest
  an application standard user (username TEST123)  logged into the application on newTest

  Is this supported?
  
  Could someone tell me or direct me to the documentation or the thread that lists which is supported / unsupported for use of browser with APEX and SSO?
  
  Thanks in advance,
  Gus...

  So this can I conclude that what you say and the above results we could get questions if connection users and open new windows in this sense?

  Yes, if users connect or not, if requests for pages using the same session of apex are issued different browser instances, the results may be undesirable.

  Scott

• Very heavy use of the processor because werfault.exe

  My machine is extremely slow due to werfault.exe.  Manager tasks shows the use of the CPU to 100% all the time.  The processes tab shows 2-3 instances of werfault.exe using all of the CPU resources.  This continues indefinitely and a reboot does not fix it.  The only way I could do my usable computer is by stopping the Windows error reporting service.  However, I fear that this eliminates simply a symptom and not the underlying problem.

  I also met the very high disk activity.  I disable 'Run on a calendar' in the fragmenteur disk (after I did a full defragmentation) and I've also eliminated Super Fetch.  He did reduce significantly the disk activity, but there are always times when the hard drive is busy and I see no reason for this.

  You go to 'Services' to disable werfault.exe.  Click on the Windows button or what it is called in Vista (the thing that replaced the 'Start' button in XP).  Enter 'Admin Tools' in the search box.  Right click on "Services" and then click "Run as Administrator".  After that 'Services' opens, search for "Windows Error Reporting Service".  Double-click it, and then you can stop it and turn it off.

  I'm not having any luck with either.  Now as I type this, there are 2 instances of werfault.exe race and each consuming more than 40% usage.  "Problem reports" and Solutions show nothing.

  It started shortly after I had installed Vista.  I had finished not even install all applications - perhaps began after installing SP2.

  I think that I will reinstall Vista.  If the problem comes back, I'll have to go back to XP.

• Cannot install Windows Vista SP2 due to error code 0 x 80070490

  Original title: conclusion it is impossible to install the Vista SP2

  Hello. I'm trying to update my parents with Vista SP2 computer, but it's a disaster. It is a 32-bit operating system. First of all, I tried to install it with windows live update but got the error code 0 x 80070490. Then I tried to download it manually from the Windows Download Center, but this has led to the same problem occurs. I then removed all virus protection programs and tried again, but it still doesn't work. I then downloaded the Windows Update Readiness Tool 947821 KB but when I try and install it it freezes for hours constantly and will not install. I think of anything else to do and I was wondering if anyone can help. Thank you

  Hi CVinaccia,

  Follow the steps described in the article below, dealing with a similar issue

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

• I want to use my bluetooth jawbone headset microphone with my PC (Windows Vista Home Premium).

  I have a bluetooth headset jawbone I would use a microphone with my PC (Windows Vista Home Premium).  I paired the jaw with my computer.  Unfortunately, it is not recognized as a microphone by my computer.  Any suggestions?  I would like to used to make orders of recognition on my computer.  Thank you in advance for advice.

  Hi Hayekk,

  There are several things to try:

  ·      Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  ·         Make sure that the device is on and that the batteries should be replaced.

  ·         Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  ·         The unit may be out of range of your computer, or too close. Try to move closer or a little further away from your computer.

  For your reference:

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected when you click the item
  http://support.Microsoft.com/kb/960531/en-us

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Multiple instances do not have parallel job using scripts on Windows Server

  Hi all

  I download after effects template on my site, the user came and download the desired content.

  I'm updating the model using scripts with the content of the user and then video rendering and therefore user get video with his text/images uploaded etc.

  its working perfectly when I update a unique model, but when multiple users come at the same time, then they need multiple instances of sequels

  so I opened multiple instances of after-effects by using "m" with after having shortened the effects

  

  After looking at the windows Task Manager, there are two instances, but the problem is

  one continuous instance and the other stop, at the end of the trial the second still paused state

  

  I need 2.3 4 or any case to work in parallel without pause/stop

  I am using windows server 2008 R2 with installed XAMP

  It's a Setup completely unsupported in first place and you will be difficult to find someone who can help you. Probably, you will need to create separate shortcuts / files in batches and run them in separate instance contexts. AE itself always detects running instances and reuse.

  Mylenium