multiple instances of ravbg64.exe

Similar Questions

• Explorer 8 opens multiple instances of rundll32.exe when closing

  When I close Explorer 8, rundll32.exe opens multiple instances and memory in the Task Manager go to more than 800,000 for each instance. After running this ram computer and virtually lock up the computer. If I stop the process, everything works normally until I opens and closes Explorer 8. It is repeatable and consistent.

  I use Vista Business, 4 concerts, Dell Latitude D830. Rundll32.exe have searched and found only one instance... located in C:\Windows\System32. I ran several programs of virus and malware and can't find any problems. Register is also good.

  I had similar problems with changing app crash of video files in a folder list to views of large icons.  I sent a problem report and in return had a fix, I unfortunately deleted after it corrected my problem.   I had to go to the command promp
  and in C:\Windows\System32 I had to modify the command that has been something like the pointed out below.

  Fault Module name: Mpeg2Parser.ax
  I think that if you send an error report that you receive a solution.

  It's because of the problem I had.
  Product

  Windows host process (Rundll32)

  Problem

  Stopped working

  Date

  18/06/2009 15:58

  Status

  More information

  Signature of the problem

  Additional information about the problem

  Bucket ID: 376914080

  Problem event name: APPCRASH

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: Mpeg2Parser.ax

  Fault Module Version: 1.2.0.79

  Timestamp of Module error: 38e280dd

  Exception code: c0000005

  Exception offset: 00006210

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

• Multiple instances of rundll32.exe in Windows 7 Premium using all RAM - no viruses detected by MSE but PC runs slowly

  Processor: AMD Athlon (TM) 9750 Quad-Core 2.40 GHz

  4,00 (3.75 usable) GB RAM

  System: 64 - bit OS with Genuine Microsoft Windows 7 Premium (purchased separately with distributor online PC)

  At startup, there are three instances of rundl32l.exe with no path name Image displayed in the Task Manager.

  The three were separated from the PID of 1624, 1634 and 1644.

  None has an associated user name.

  Used private working memory is listed as 128K, 344K, 520K.

  Commit size is listed as 1, 036 K, 1 864 K and 1 940 K.

  List page 717, 1 731, and 2 044 defects

  Note that the following persons have no associated user name, until I log in as an administrator:

  Csrss.exe, nwsvc.exe, until I log in as an administrator, date at which all are listed as belonging to the user of the system.

  There are two instances of csrss.exe after I login as an administrator to monitor the system.

  Note that as soon as I open MSIE (worm: 9.0.8112.162421 64-bit Edition |) Update: 9.05 (KB2647516) | Encryption level: 256-bit)
  The use of the RAM dropped to 1.04 BG of the GB available total 3.75, jumped but still once 3.14 GB and the balloons of the use of network.

  as soon as I logged as administrator.  There are multiple instances open for svchost.exe attributed to the system, network and Local Service.

  Since I use MacAfee and Microsoft Security Essentials and have found a problem, I wonder if there is a virus that creates multiple

  run32dll.exe and this according to the capacity of detection of these two programs.

  You know, it's more difficult to follow all the news - just to get a response.  I've restored as soon as possible, has got rid of the programs and the remains, then reinstalled MSE and updated, and, Yes, the computer is updated and better now with the improvement of power, video card and without an easy way to trace this information (you know a feature of Windows that would follow easily everything you ask?) - it seems a big eater of real-time , for questionable results.  I thought that Windows 7 Ultimate would have included more administration tools just to log on and view, copy, paste, rather than the back-and-forth necessary to fill out a form that is as unique as it is not shoot all the tools.  I see that much info required users, and where is the forensic tools easy to use a computer owner should have?  Malware authors certainly use them.  The average owner must be at least as good a handle on reports on what's happening, everything down to the core.

  Any tips?

• Photosmart 7510 running multiple instances of HPNetworkCommunicator.exe

  I have several instances of HPNetworkCommunicator.exe being run, but only 1 printer configured.  An escalation manager HP/engineer? connected to my PC to help solve a problem that I had with Efax.  He used a tool of the scrubber and left all instances previous HP printers I had and then reinstalled the PhotoSmart 7150 software.

  Everything worked fine after that.  However, Windows did an update on my computer and after that I could not the scanner, no printer software worked (to check the ink levels, scanner, etc...).  Responsible for the escalation, said there are problems with Windows updates because after the update, Windows does not see the printer as a scanner and it is a threat to the network, so it disables the scan from the printer part.

  He has reinstalled the printer that a printer wireless and then scan will work again.  However, he had several (3) instances of HPnetworkCommunicator.exe running after that.

  I went into the control panel and saw 2 7510 s PhotoSmart configured, so I deleted one of the printers.  I thought that's why there are several instances of HPneworkCommunicator running, and delete the redundant printer would solve the problem.

  I rebooted and checked everything was working on the printer.  However, I have yet 2 instances of HPnetworkCommunicator running.  Is this normal?

  Hello

  It is normal to have more than one instance running at the time sime because of several communication actions occouring simultanly (e.g. alerts of ink. Front panel to scan, the device status, etc..)

  This is the mode of operation of the specific software version.

  If you see the affected PC performance, it's another story.

  For such a question, I would recommend you to set the alert of ink as shown below, restart the PC and check any changes:

  http://support.HP.com/us-en/document/c03191239

  If performance is still affected, also disable the front panel scan option.

  If the software does not affect the PC somehow, you have really not hae any reason to take action.

  Kind regards

  Shlomi

• Multiple Instances of werfault.exe

  It is common to have 6 instances of werfault.exe runs?

  Hello Tom,

  Thanks for update.

  It seems that the problem is solved.

  However, if re-problem persists, you can run DISM.

  Please do not hesitate to answer, if you have any other concerns about Windows.

  Thank you

• On the task bar of Windows Explorer post work without creating multiple instances of explorer.exe.

  Hi, I tried the workaround solution where you enter "%SystemRoot%\explorer.exe: {20D04FE0-3AEA-1069-A2D8-08002B30309D}" in the target.  However, this doesn't seem to be a full working solution because it creates an instance of "explorer.exe" whenever you access.  I want a solution that allows me to open the 'Workstation' of the taskbar that creates instances fallacious "explorer.exe" (it should stay onlya singleinstance of explorer.exe).

  BTW, no, I don't want to pin 'my computer' icon so I have to hover over windows Explorer and then proceed to my computer.  I want the default location in Windows Explorer my computer and no libraries (which had the idea to do this? this person is a fool, because the majority of people never use libraries)

  -Dan

  Another alternative - using a VBScript script to launch my folder on the computer.

  Copy these lines into Notepad and save the file as "MyComputer.vbs".

  Set objShell = CreateObject
  objShell.ShellExecute "shell: MyComputerFolder ', ' ', ' ', 'open', 1

  Create a shortcut to the script including the full path, as below:

  C:\Windows\System32\wscript.exe "D:\MyScripts\MyComp.vbs."

  Change the shortcut icon, and then PIN to the taskbar.

  How is it a better alternative?

  The script takes 3K of memory (max) and duly ends after launching the folder desktop. It's better than the original situation where each instance explorer.exe taking 20 + K of memory and not end automatically.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• ! 00% CPU use due to Multiple Instances of WerFault.exe running on Vista SP2 computer

  I recently reinstalled Vista (reinstall clean due to the failure of the hard drive to the new hard drive) and SP2 and all updates available. I think WerFault.exe works sporadically (up to 5 instances at a time) using 100% cpu. This makes my system unusable. I end the prossess (s) by using the Task Manager, but they keep restarting. I tried the error report auto disablinf and made many analyses of malware with various reputable antivirus/antispyware programs that have all found nothing sinister. I do not have insalled all programs that I didn't have prior to reintalling Vista. I had never experienced this problem during the four years that I've been running Vista. Any suggestions?

  Werfault.exe is the windows error reporting service. type 'services' in the search from the start menu, right click on the "error reporting service Windows" and choose "Properties". In the drop-down list "Startup type", choose "disabled", then restart your computer.

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I hide/show toolbar again operate independently on multiple instances of firefox?

  I run two instances of firefox.exe. One for the left monitor and one for the right. There is a toolbar that I want to see on the right screen, but I don't want to see it on the left screen. This used never to be a problem, but it is now. It seems as if well now why show/hide toolbars are inextricably linked, and by changing or watching a toolbar on a single instance simultaneously causes the exact change even on the other open instance. I'm hoping that it could be a simple solution to this effect in the subject: config, however, I would rather not tamper with these settings until I'm sure that settings with the fix for this particular problem.

  Thank you for your attention and for taking the time to read this post.

  Sincerely;
  DC

  Toolbar settings are common to all windows open in this instance of Firefox.
  I don't know if there is an extension that allows to fix this dependent window, so you can check the website of modules.
  If you can't find one then you would use a second instance with its own profile.

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• How to force multiple instances of a process or program to run under XP?

  Sometimes, several instances of a program can execute without the user does something special, for example, you can open several instances of the Adobe Reader software if you click on the names of different files (but if you click directly on the .exe in Program Files XP opens just one instance).

  I am trying to run multiple instances of the Kindle for PC program, so I can display 2 different books or pages at a time. I guess that there is a way to do this by manually creating a shortcut or directly from the running of the KindleForPC.exe command line and play with command line parameters... someone knows it how?
  Thank you

  It really depends on how the application was written.  You can try to run as a different user and see if it works.  Right click on the shortcut of programs and select 'Run As.... "and use another user that the currently connected.  The user must have the appropriate privileges to run the program, for example a limited user may not be allowed to run the program or access any of its files or registry keys.

  John

• CF 11 Enterprise multiple instances are not created correctly with a separate service account.

  The company that multiple instances are not created correctly with a separate service account.

  The questions that I have are very similar to the issues identified in the link below.

  https://forums.Adobe.com/message/6584848#6584848

  My company of 11 CF will not create additional services for my sites of cold fusion beyond the initial service created during the installation process. My problems are compounded because when I try and uninstall the CF11 Uninstalling application crashes and generates the error below. I now have to try to manually uninstall to reinstall CF11. Any help or suggestion to get the problem solved is welcome.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: javaw.exe

  Application version: 7.0.510.13

  Application timestamp: 52b25e38

  Hang Signature: 0967

  Hanging Type: 6144

  OS version: 6.1.7601.2.1.0.274.10

  Locale ID: 1033

  Signing of additional blocking 1: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 2: 2cff

  Signing of additional blocking 3: 2cff32d5db809ac6ce8170a1d7ac1eb0

  Signature of blocking additional 4:0967

  Signing of additional blocking 5: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 6: 2cff

  Signing of additional blocking 7: 2cff32d5db809ac6ce8170a1d7ac1eb0

  I solved the problem with the implementation of Cold Fusion 11. I had to disable Windows server 2008 R2 UAC for all users in order to complete the installation with IIS as a web server. This also solves the problem with the inability to uninstall Cold Fusion.

• Running multiple instances of Flash IDE CS (6)

  I have a build machine compile my fla files by running Flash.exe command line and providing a JSFL file as a parameter. I want to run multiple instances of the IDE Flash to enable simultaneous generations on this machine otherwise it only one thread running on a build machine that is a waste of resources.

  So, is it possible to run multiple instances of the Flash IDE? Perhaps there is some sort of command line? I have Flash CS6, but there should not be a lot of differences with CC, isn't it?

  I don't think that you can run multiple instances of flash CS6 and CC.

  -Reynaud

• Connection of multiple instances of ColdFusion 10 to a single server Apache 2.2

  It is replicated from site "Server failure" StackOverflow. The CF community is under represented, so I post here also.  Sorry for "cross-post".

  It's on Windows 7 Home Premium edition.

  I had two instances of ColdFusion 10 (update 2): "cfusion" (the default) and "scratch."

  I had a single instance of Apache 2.2 running.

  In Apache, I've set up two virtual servers, each of which must be served by another instance of ColdFusion.

  Each CF instance serves files through an internal web server to Tomcat. Apache serves as vanilla HTML files too. If instances of CF and two virtual servers separately work OK.

  I can get wsconfig.exe to connect either of the CF instances to the Apache Server and serve files via Apache and this instance CF.

  However I don't find a way to connect the second instance of CF at Apache, so that two instances of CF are connected, each serving one of the virtual servers. WSConfig doesn't seem to understand the concept of "multiple instances of CF", and the changes it brings to the httpd.conf (via mod_jk.conf) does not seem to be implemented so as to take account of multiple instances of CF, speaking to a single instance of Apache, or several virtual servers. I will admit not being fairly confident with mod_jk (or even really httpd.conf) operation to be able to guess if I can change things to make it work.

  If I try to add the second instance of CF using WSConfig, I received a message "the web server is already configured for ColdFusion. Whatever it is... not the instance of ColdFusion - what I want to connect to. If I remove the connector in any instance is already connected, I can connect and then a no problems. Not that this helps, but it demonstrates that the CF can connect to Apache.

  All of this used to be relatively straight line fwd under older versions of CF and JRun :-(

  The docs just I found are on the page "Connect multiple Apache virtual servers on a web server to a single ColdFusion Server" (http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd 5 html), but that precisely only addresses a single instance of CF. There is no equivalent page for several instances of CF.

  I hope a little I can move some of the config of mod_jk in my virtual host entries in httpd - vhosts.conf (that's how it used to work for JRun), but I have no idea what to put where.

  I think I covered all the necessary info here? If not, sing and I'll add more. Thank you.

  Anyone?  See you soon.

  --

  Adam

  HA, in fact, I see the question ServerFault replied back right after you asked me: connecting multiple instances of ColdFusion 10 to a single server Apache 2.2 - Server Fault

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile