0x737D and installation of SP3 KB970892 failure error. Proposed solutions do not work. No quick fix out there?

Similar Questions

• 0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  Hello

  (1) what is the exact error code that you get?

  (2) service pack you have installed for XP?

  Method 1: Verify that the services are started
  Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
  2. in the list of services, click on automatic updates, and then click Properties.
  3. in the startup type list, click Automatic, and then click on apply.
  4. If the service status is stopped, click Start, and then click OK.
  5.right - click Background Intelligent Transfer Service, and then click Properties.
  6. in the startup type list, click Manual, and then click on apply.
  7. If the service status is stopped, click Start, and then click OK.
  Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144
  
  For reference:
  How to troubleshoot a service that crashes in Windows XP
  http://support.Microsoft.com/kb/934650
  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018
  Method 4: How to reset Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Note: You may need the XP disc for some functions in the steps above.
  I hope this helps!

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• I start the download for my CS5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  I start the download for cs5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times

  Hello Tracy,.

  How exactly you are trying to download and install updates?

  Is it a mac or windows?

  Manually download CS5 CS5 download products

  Download the updates manually CS5 for Windows here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows

  Download the updates manually CS5 for Mac here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh

  Concerning

  Jitendra

• I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  Hello

  Just sent you a personal message

  Let me know if you have any question.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Get error "this application does not work without Google play services"...!

  Hello

  I use google maps in my application and be able to install the apk from file in the BB device. But after installation when launching the application, I get an error "this application does not work without Google play services.

  How can I get google game services to the BlackBerry device.

  Kind regards

  NGO.

  The BlackBerry Runtime for Android applications does not support Google Maps (or Google Services play). If your application uses Google Maps, there are two ways that you can support mapping in your application. One option is to replace the library card theGoogle with a WebView that integrates the web version of Google Maps.

  For more information on this process, see using a WebView to view Google Maps.

  Another option is to replace Google Maps with OpenStreetMap, which is a free card all over the world.

  For more information on this process, see Replace Google Maps with OpenStreetMap.

• DirectSound Capture error. Meter will not work

  Since I have Windows 7 I was not able to play the Midis on my computer... I gave several times on this because I was never able to produce any type of error in relation to it.

  When I press play on a midi in Windows Media Player, only the "drum" seems to play and nothing else.

  So, today I thought I would get a Midi player and had Midi SoundFont player and when I turned it on. I got this error:

  ---------------------------

  Midi player

  ---------------------------

  DirectSound Capture error. Meter will not work.

  ---------------------------

  Ok

  ---------------------------

  and the files it plays does the same thing that any time before only a barrel, no music.

  I hope that this error message can help get for lunch again.

  How can I fix?

  -as an aside, that may or may not be linked there are times when headphones are plugged into the front panel of my computer that all constantly emits a white noise that I do not notice it when the music plays.

  Hello

  Thank you for the update.

  The question is limited to any file in particular?

  Windows Media Player supports midi files.

  I suggest you run the fix for the Player Windows media related question library and check.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Now try to read midi files and check.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• When I select emails in Windows Live Hotmail, I want to remove the delete button and all the other buttons in the same row do not work.

  When I select emails I want to remove the delete button and all the other buttons in the same row do not work. This not only with hotmail, it seems to be with other applications, including on this page at the top where you have "Home, office, int explore" etc...  It happens to be in this part of the page, which can make? I ran anti mailware, anti-spyware and Windows Security Essentials found nothing and they all date please help

  original title: send probs

  Hi cooljae,

   
   
  The question you have posted is related to Windows Live hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
  http://windowslivehelp.com/product.aspx?ProductID=1

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• I have Dreamweaver CS4 and you have upgraded to Mac 10.11.1 - Dreamweaver, stop working for me.  Is there an upgrade available?  Do I have to buy a new one?  If I have to buy a new version it keeps all my files?

  I have Dreamweaver CS4 and you have upgraded to Mac 10.11.1 - Dreamweaver, stop working for me.  Is there an upgrade available?  Do I have to buy a new one?  If I have to buy a new version it keeps all my files?

  You're better off with the latest version you can buy on a monthly payment plan. See here the new features Dreamweaver CC | Buy Adobe Dreamweaver CC

  All your files will be retained when you install a new version. Indeed, Dreamweaver CS4 will remain on your system if you wish.

• Export as Adobe PDF does not open automatically, and the downs of drop on all my options do not work... Help, please

  Export as Adobe PDF does not open automatically, and the downs of drop on all my options do not work... Help, please

  I need to be able to easily convert PDF into word documents, which is why I got it, but in the acrobat reader software recent update/upgrade the export to PDF option doesn' automatically open, nor the dropdowns work to "create a pdf" "change pdf" etc.

  Hi howardr59083057,

  Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the pdf Export service help Acrobat Reader | Export PDF to Acrobat Reader DC.

  You can also use this service online at https://cloud.acrobat.com/exportpdf

  Kind regards

  Nicos