DirectSound Capture error. Meter will not work

Similar Questions

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

• program of streets & trips Microsoft will not work, keep getting registration error message how do I fix

  Microsoft streets & trips program will not work keep registration error message, how can I solve the problem?

  Hi, Long1950,

  See if that helps

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update XP KB2707511 and dos programs will not work. I get an error in NTVDM 'the parameter's imcorrect

  After loading the high windows update KB2707511 my BACK program will not work. I get an error in NTVDM "parameter is imcorrect" and the program closes.

  Original title: XP update programs KB2707511 and back

  Have you tried to uninstall it to see if that helps?

• My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  Hi John4452,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  Troubleshoot failures to find the new LifeCam hardware

  I hope this helps.

• Unable to Access Manager device and receive an error message saying "MMC will not work with a version of Internet Explorer prior to version 5.5.

  Original title: control Pasnel: Device Manager

  Trying to open Device Manager in Control Panel, I get the following error message:

  "MMC will not work with a version of Internet Explorer prior to version 5.5"

  OS Vista Home Premium 32 bit SP2

  There are conflicting answers on Google

  1 virus Infection. Recommendation: complete the recovery. I ran several anti-virus and anti-malware program that pretend that my system is clean.
  2. added Version 6.0.0.0 for a registry entry will produce a fix.

  The first suggestion that I consider as a last resort, but don't want to mess with my registry without help.

  Does anyone have experience of this 'mistake' and can talk me through a patch.

  Hello

  Please keep us updated.

  Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Error: COM SUrrogate will not work

  Hello

  All 5-10 sec. I get an error message with: COM Surrogate will not work.
  DivX is same day as windows.

  It has something to do with Media Player?

  starting from the How To Geek - http://tinyurl.com/3ahbyu MS - MVP - Elephant Boy computers - don't panic!

• The cutting tool will not work in trying to capture the menu drop-down

  I've recently upgraded to Office 2016 from 2013 and since then my Snipping Tool will not work correctly. I can always capture what I want except for the drop down menus. Eight other users are connected to my network of the company; all Windows 7, all Office 2016 and it works on all the computer but mine. I opened the Snipping Tool, click Cancel (tried to escape, too), and then open the menu drop down, press Ctrl + print screen and nothing happens. Can someone help me?

  I just thought of it myself. Used to work in previous versions using the Esc, then press Ctrl + print screen. Now, it's a little different.

  1. Your screen are preparing to capture you want, with the exception of the drop down.
  2. Open the capture tool and choose the type of capture you want (I use the Rectangle) and now the new part... Choose a delay for however many seconds you have to when you press New when you can open the drop desired down.
  3. Click new. (The capture tool will activate not to but the number of seconds you have chosen late.)
  4. Open your drop desired down and wait for the tool.
  5. Proceed as usual.

  Hope that helps!

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• Photoshop will not work. Error 16

  Photoshop will not work. I get an error 16. I'm running OS X, El Capitan on a Mac Pro Deskto, 2009.

  Close all Adobe applications.

  (1) right-click on the icon in the Finder and select ""Go - To Folder " option."
  (2) you will get a text box, type in the following command, and then press the 'Enter'.

  / Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Make sure the two currently logged in user name and administrator user accounts have read and write access.
  

  Important step : click the gear icon and select apply to closed. Close the dialog box information .

  

  [ Once we provide all permissions to the Adobe folder and select apply to included items options, access "Read and write" apply for all subfolders and files inside, the two Adobe PCD and SLStore files will be present inside the Adobe files and gets all permissions ]

  Then, launch Photoshop and verify.

• When I try to join my stylesheet css Dreamweaver gives me an error saying that my .css file seems to be a .html file and will not work. How can I fix this so I can join my stylesheet?

  I built a css style sheet in Dreamweaver. When I try to attach it to my website html, it prompt me that my 'css file seems to be a .html file and can not attach. I tried to remove the / * / as suggested by other forums, but this has not solved the problem. I was using stylesheets css without problem 2 days ago. Now, I get this error message. How can I fix this so I can join my stylesheet?

  What looks like the code in the CSS file?

  An external CSS file must be written in CSS only (no html tag like,,etc.).

  It must also have a .css file extension, if yours has an extension .html, that it will not work.

• The electricity in the Notification area meter does not work in my XP laptop.

  Original title: XP battery meter does not work.

  KIM I have Windows XP Professional 64-bit on my laptop. The battery meter in the notification area will not work. It shows that it is connected. I changed the profile of laptop computer power and nothing. The laptop came with Windows 7 Home Premium. Please do not ask me why I went to XP to 7, because who does not help me. How can I fix the battery meter? It worked until I installed my graphics driver, I don't understand why it does not work now.

  Thank you
  Mike
  HP G62-225DX 4 GB Ram 2.3 GHz Dual Core Pentium 4. 250 GB HARD DRIVE.
  XP Pro 64

  Hi, Mike

  Thanks for posting in the Microsoft Community.

  I'm sorry to hear that you have problem with the Power meter on your Windows XP computer. I would like to know more information, so that we can help you better.

  1 - is this problem started after the installation of Windows XP?

  2. do you get any error code or error message while starting?

  Let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Run the fixit in the following Microsoft FixIt.

  The problems of power consumption and extend the life of laptop battery:

  http://support.Microsoft.com/mats/windows_battery_power_settings

  Method 2:

  Try the steps in the following Microsoft article.

  How to display and use the icon "Power Meter" in the area of notification in Windows XP:

  http://support.Microsoft.com/kb/909606

  Please reply with the status of the issue, so that we can better help you.