0x8000CCC0E__Cant find correct POP3 details for direct mail

Similar Questions

• setting password for direct mail

  my regular yahoo mail is password protected, but when I click on live mail it goes right into my direct e-mail, how do I password protect?

  Hi Gary,.

  This forum is for MSE and malware problems.  We do not manage the problems of Windows Live Mail.

  For assistance with Windows Live Mail, please see the following:

  http://windowslivehelp.com/product.aspx?ProductID=15

  http://windowslivehelp.com/forums.aspx?ProductID=15

  I hope this helps.

  Good luck!

• Unable to find the required details for SNS-UCS-TPM in the datasheet as rack unit size

  Hello

  I'm just trying to understand the dimensions of the SNS-UCS-TPM device and the same power requirement...

  Is - this 1 U device with 1 x 650W PSU? I think details power but I'm not able to get the size details with respect to the width, length, and width.

  Can you please share the good link that will offer all of this in detail?

  The Trusted Platform Module (TPM) is a module of small integrated circuits on the new network of Secure Server (SNS) 3415 and 3495 device models. They are based on the platform Unified Computing System (UCS) C220 M3.

  Both the 3415 and 3495 have the same physical dimensions, differing only by the number of processors, memory and hard drives installed in their breast.

  The detailed characteristics of the UCS C220 M3 are here. You can see a diagram of where the TPM is installed here.

• How can I put merge Toolkit and direct mail (for office) on a MacBook OS?

  How can I put merge Toolkit and direct mail (for office) on a MacBook OS?

  They don't seem to offer a Mac version. See https://www.mapilab.com/support/faq/system_requirements_outlook.html

  You can use the following to contact them to check that: https://www.mapilab.com/about/contact.html

• In order to recover the English spelling in OE6, I installed the spell checker for OE. I would like to find a similar tool to retrieve the spelling correction in OE6 for Italian.

  Checking spelling WinXP and OE6

  Hello, I use Office 2010 and Outlook Express 6 with Windows XP. In order to recover the English spelling in OE6, I installed the spell checker for OE http://www.snapfiles.com/get/spelloe.html. I would like to find a similar tool to retrieve the spelling correction in OE6 for Italian. So not the tools that spell everything I write anywhere, but one that works from OE6 allowing me to choose the Italian in the drop-down relative to the menu where to find English (United States) spell now. Can someone help me?

  Thank you

  Best regards

  I've been in the OE newsgroup & forums for nine years and I've never seen a third Italian spelling part for OE.

  If you have a copy of Microsoft Office 2003, you may be able to get that way.
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  1. What email program are you using?
  2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  Hi RobertKlaas,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows mail and runs under Vista, recently started asking passwords for e-mail accounts, I had defined for the years

  I have several e-mail accounts defined in Windows Mail (WM). In 2008, I created these accounts and WM has never had any problems email from their recovery. A few days earlier, a "Windows Security" pop-up appeared asking me to "Please verify that the user name and the password are correct for your mail server." I enter the user name and password and let the box 'Remember my references' checked. WM then recovers successfully by e-mail of this provider. I repeat this process to enter email ID and their password for each e-mail and WM account gets successfully mail from them all. Subsequent recoveries automatic email (that occur every 20 minutes as specified via 'Tools', 'Options' and ' check for new messages every xx minute (s) ' in the 'Général' tab) run without problem until I restart WM. So I must return all identifiers and passwords.
  I deleted the entry for one of the accounts, WM restarted and then recreated the account. Once more, it works fine until I restart WM, date on which the impulse begins again. It seems that WM has lost the ability to remember the ID and password between sessions.
  Comments for similar problems indicate that McAfee antivirus can be the cause of the problem. I use BitDefender Antivirus. I don't see how my AV product could be the problem because once I re - enter usernames and passwords, everything works fine.

  Thank you Gary, but I don't know why BitDefender or any other product of anti-virus (AV) would be a problem. As I said, once I entered the login details and passwords, I am able to send and receive mail several times without the prompt that appears until I restart Windows Mail (WM). I speculate here but I feel that the AV product would have not had invoked until there was the mail for her to analyze. This would not happen until AFTER WM was authenticated by the mail server, and then began to receive mail. The authentication command prompt was certainly appear BEFORE WM tried to contact different mail servers. I know this because I could see send/receive the WM status window, where it shows each email account and compares it to the coast after a successful login.

  In any case, when I started this morning at WM, it worked well! The only thing I can think of that would have fixed this problem as if by magic is that I applied the following Vista hotfixes yesterday:

  • Windows malicious software removal tool - January 2011 (KB890830)
  • Update security for Windows Vista (KB2419640)
  • Update security for Windows Vista (KB2478935)
  • Update definition for Windows Defender - KB915597 (definition 1.95.3662.0)
  Then I did the required reboot. I'm skeptical that these corrections have a direct effect on this problem because when I started at WM after the restart, he asked once more the ID and passwords. I did nothing with the AV product
  The key here is that WM works very well this morning in the same environment as yesterday, except for the above mentioned fixes. I consider this problem in the past, but I do NOT know what caused his in the first place or what fixed it.
  Thank you all for your help!

• direct mail advertising by intermittent connection and password

  Windows live mail intermittently will not connect to my accounts of att and bellsouth.  If I leave completely direct mail and back, sometimes it will search for emails.  I have double and triple checked that the settings are correct.   It began a few weeks ago.

  The message displayed is:

  Can't send or receive messages for the ** address email is removed from the privacy * account. An incorrect password was entered. The next time that you send or receive messages, you will be asked to enter your user name and password for this account.

  Server error: 0x800CCC90
  Server response:-ERR [IN USE] maildrop busy.
  Server: 'inbound.att.net '.
  Windows Live Mail error ID: 0x800CCC92
  Protocol: POP3
  Port: 995
  Secure (SSL): Yes

  Server response:-ERR [IN USE] maildrop busy.

  The message about passwords is a red herring.

  It may be a connection to a POP3 mailbox at a time box. If you access this account by any other means, for example from a smartphone or other mobile device, then if it is configured for push email, Windows Live Mail will not get a look in. Disable any other e-mail application that accesses the same account to see if the error in Windows Live Mail does not disappear.

  The fault can also occur if the polling interval is shorter that the server will allow. When you view your list of messages, press Ctrl-Shift-O for Options. What is the interval in the arrival of new messages every n minutes? If it is less than 15 minutes, do 15.

• Helps to configure the pix firewall 507e for e-mail access

  Dear experts,

  I called our provider cisco and ask for technical help regarding our current problem as we know on our set-up.

  She told me to convey my concern to the Cisco TAC. My friends told me to post it here under discussion Netpro.

  I am writing today to ask a few questions about my pix 506 firewall configuration.

  To give the implementation Details pls find below and attached seizures of the show tech command.

  We have subscribed the service DSL and Singtel give us 2 addresses valid public IP that is 203.125.100.246 255.255.255.252.

  I used 203.125.100.246 for my external interface of my firewall pix and singtel assign 203.125.100.245 to the DSL router. In this case, we will only use PAT for internet connection.

  Currently he works very well our Mail Server is resided in the Singtel Office having the ip address of 165.21.111.22. Not work that we can receive and deliver electronic mail on the internet, and we can also surf the internet.

  Now we intend to put our mail in our own network server, because sometimes we encounter slowness on receiving and sending emails. Pls check on the IP address below

  Our LAN IP address is 192.168.1.X 255.255.255.0

  default gateway, which is the IP address of the firewall pix inside interface is 192.168.1.1

  The new mail server IP address is 192.168.1.4.

  Here's what I've done so far.

  I created a static mapping for my mail server is here

  public static 203.125.100.246 (inside, outside) 192.168.1.4 mask subnet 255.255.255.255 0 0

  and modify the access list to allow smtp on our networks.

  192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any

  ACL_OUT list access permit icmp any host 203.125.100.246

  ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp

  ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3

  ACL_OUT list access permit udp any host 203.125.100.246 EQ field

  Access-group ACL_OUT in interface outside

  After doing it... I have loss all the internet connection, the email does not work... so I deleted immediately. because it causes network failure.

  I have rather edit it and create a static map like this.

  public static 203.125.100.246 (exterior, Interior) 192.168.1.4 mask subnet 255.255.255.255 0 0

  and modify the access list to allow smtp on our networks.

  192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any

  ACL_OUT list access permit icmp any host 203.125.100.246

  ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp

  ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3

  ACL_OUT list access permit udp any host 203.125.100.246 EQ field

  Access-group ACL_OUT in interface outside

  Saw what it did not cause a failure of network or interruption. I thought that it will already work with the config, I keep it and this is the current config now... But when I change the POP and SMTP settings so that it points on 192.168.1.4 which is the new mail server on our LAN. his does not work.

  To this day, we are in a discussion with my boss or not possible to create a static mapping on our new mail server address 192.168.1.4 to 203.125.100.246 which is already assigned as external IP address and is used for PAT.

  We are asking your help to know how to set up our internal mail server statically match our public IP address that is already used for PAT.

  Please check attached the tech release see the.

  Thank you very much!

  I'd appreciate your quick response.

  Your truth.

  Dennis Pelea

  Dennis,

  Can you please send to me your configuration full pix (unscrew sensitive information) to [email protected] / * /

  I am puzzled, why this configuration does not for you. I have several clients who use a public ip address for external intf more than several other services that use this single ip address.

  Thank you / Jay

• direct mail key 2011

  Running windows 7 64 bit.  I upgraded to live essential direct mail.  Everything was fine.  Some computer problems and fixed my techno and everything worked fine.  When I opened the bulk of messaging, all my email messages, files, etc.  where he.  My contacts disappeard and when I tried to display my messages, I would get an error that the mail could not open my messages.  I tried uninstalling and reinstalling with no luck.  I'm back to live mail, but I really miss the most!  I hope someone can help

  In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/solutions.aspx?productid=15

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Direct Mail installtion problems

  Hi, I installed windows live essentials on my laptop wife.s, everything seems to work properly with the exception of direct mail, when I try to open a box to come up with the following, C:\Program Files\Windows Live\Mail\wlmail.exe and the message... The application has failed to start because its side by side configuration is incorrect. check the log of events applications for more details.

  The Vista Home Basic installed on the Acer has always seemed very well, but it will not access windows live mail.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Direct mail adds underscore to extension of Word, i.e. docx becomes _docx

  Direct mail adds underscore to extension of Word, i.e. docx becomes _docx recipient can't open the document without save and rename.

  Direct mail add underscore to extension of Word...

  I think that if you look closely, the name given in the message source file actually contains more than one point (period, full stop, '.'). Because this used to be a problem in certain situations, at the time where alone was allowed in filenames, Windows, Windows Live Mail useful converted one of them into an underscore character (underscore, "_"). Unfortunately, it converts the bad, so instead of change of oldletter... docx to oldletter_.docx, he transformed it into oldletter._docx

  The obvious way to deal with this is to use the function "save attachments" to Save as, taking advantage of the opportunity to correct the file name.

  Another way to deal with it is to save the file with its current extension, undefined, ._docx, say, then use Open with from the Explorer to select the word to open the file with and always use this program to open this type of file.

  Often, the problem is because users allow programs select file names. Word, for example, will take the first line of a document or part as its file name suggested; If this is is be a title or a title that ends with a period, and then that dot will be included before the extension point is added.

  No amount of repair installation or uninstallation and reinstallation will have any effect on this flaw.

• Thunderbird 38.2.0 does not check for incoming mail, freezing

  I used Thunderbird for years without problem. Update 38.2.0 was so bad for me that I had to uninstall it. Questions:

  (1) would not check for incoming mail
  (2) popped up the windows of information that had no text and even not closing "x" in the corner (although I could click the right superior whiteness and she closed)
  (3) screen would freeze. At least the closing 'x' still - working but it's the only thing that makes.

  Every update I've ever had until this has been perfectly integrated. This one was painful.

  My question is when there's an update to correct these problems?

  Please update to version 38.3.0 which came out today. Will probably solve your problem.

  Is this better?