1.4.1 date of issue?

Similar Questions

• Store data related issues.

  Hello
  
  I am new to ODI. I have a couple of store data related issues. In fact, I am facing some problems, so I would like to have clarification.
  
  1. I imported the definition of a database table in a model. Later, I added a few columns to the database table. However, after having overthrown the model the new columns did not appear as a column in the data store. When I click on view the data, I could see the new columns. I expect that the new columns should have been displayed in the model tree.
  
  2. the key constraints have been defined in the database schema before reversing the model. However, these do not appear in the model. However, primary key constraints are listed.
  2A. I manually created the FK constraints in the model. On the definition tab, I gave the same name as it appears on the database. Also, I chose the type of the constraint as a reference database. And I checked activate on the database check box. These three steps are correct? The columns tab was completed as one might expect.
  
  These questions really (1 and 2), or am I missing a step? If I miss the point 2, to create the FK constraints manually, are my steps like 2 correct?
  
  I use ODI 10.1.3.5 and Oracle 11 g 2.
  
  Thanks in advance,
  
  Maury.

  Yes. You can install ODI 11 g at the same time at ODI 10 g.

• Oracle EPM Planning 11.1.2.3.500 data loading issue

  We do a load all night at our project and dimensions of a csv file. We use a unix shell script command to build to start this process.  First, we conduct a dry using the / N command, if this is successful we then update and save our contour using the / C command. The problem is that dry running checks only the file to make sure that it is valid, it does not test the file against the contour.  I was wondering if anyone knows of an order, that I can use to test against the contour csv file WITHOUT saving it. This way if there is an error in the file, it will not update our plan with incorrect data.

  Thank you.

  I agree with Sunil.

  You will need to run the file through a few scripts to check some things that you are looking for.

  I had a similar problem to another client, they also check that their wasn't any what issues/releases (alias) for the construction of the dimension when running on the day the day.

  The solution came us up with a (do not know if it would work in your scenario), we have treated our generation of dimension file towards the end of the company.

  So we had a race the night before and if there are problems they are sorted before the race every night. Minor problems that could be corrected using fact, how if there were too many questions of a change in the hierarchy, we not treat of the day to the next and get the company to fix their hierarchies before we reconstructed again.

  Concerning

  Jimmy

• Flashback Data Archive issue

  Hi all

  There is this issue on the web:

  Q: identify the statement that is true about Flashback Data Archive:

  A. you can use multipletablespaces for an archive, and each archive can have its own maintenance time.

  B. you can have an archive, and to eachtablespace which is part of archive, you can specify a different retention period.

  C. you can use multipletablespaces for an archive, and you can have more than one default value archive by retention period.

  D. Si you specify an archive by default, it must exist in onetablespace only.

  Everyone says that the correct answer is b. isn't it supposed to be a?

  Specified retention period to the archive flashback level not tablespace, then B is incorrect.

• Date performance issue

  Hi guru,.

  I use 11.1.6.8 OBIEE. One of my report is to have performance issue when I dig in that I found that the date filter not applied in the code SQL generated for send DB, due to which there is table scan, but strange thing is that when she displays data based on the Date range filter. It only occurs with the date dimension, all other dimensions are working properly. I'm not sure what he is missing.

  Thanks in advance.

  concerning

  Mohammed.

  I found the problem, it is in the characteristics of the DB. I click query to get the DB position it works now.

• Data loading issue

  Hello
  
  I have question about the same name of a member in a different dimension, for example, I have two dimensions, both the name of the Member called test
  
  Repair status
  30 + parts
  
  Delivery status
  30 + parts
  
  I have activate a member copy lights. I got error when loading data 'Member 30 + parts not found in the database '.
  
  So different size can cause same name of the Member to enable duplicate member turn on? or is the ths issue of data?
  
  Published by: user8091395 on August 22, 2012 09:05
  
  Published by: user8091395 on August 22, 2012 09:06

  When you use the method of "Reference" described in this tutorial, you can specify the "reference size". Have you tried?

  Vicky - members duplicate names can also exist in one dimension without be shared members.

• LoadVars data access issue

  Hi all
  
  Earlier, I posted a similar topic, the issue has been resolved... but I decided to go back and rework my code because it was a mess and I needed to simplify it. Of course, now when I try to make a base LoadVars(); I encountered problems. I am loading a single variable text file, and I want to be able to access the results outside the onLoad thereafter. The trace inside my onLoad handler file returns what to expect, but my track in the end returns an empty string (as defined in my variable declaration) instead of the variable of my text file.
  
  Is there a way I can access this data outside the onLoad handler? and then put it back in my loadWords function?
  
  Thank you
  
  ScottieBitter

  first of all, if you want to use a variable outside a function, do not allow a local variable. (IE, not the prefix of the name of variables with var.) Second, if you have to delay execution of code (outside the onLoad() method) to the loading of the external/values variables is complete, use setInterval or onEnterFrame loop continuously check if the variables/values have finished loading.

  Thus, for example:

• Date filter issue

  Hi all
  I want to filter my report with two date, you get dashboard quick presentation variable and others, I'm subtracting 7 days from the date of entry.
  
  Here I use the filter in advance as sql
  
  "Display alerts. STATUS_DT < = ' @{SDate}'
  
  "Display alerts. STATUS_DT > = timestampadd (sql_tsi_day,-7, Date'@{SDate} "")
  
  I get the error of date format, here's the log
  

  Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
  Odbc driver returned an error (SQLExecDirectW).
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 5/26/2009 does not match the specified format. (HY000)
  SQL Issued: {call NQSGetLevelDrillability('SELECT "Alerts View".REVIEW_ID saw_0, "Alerts View".LAST_ACTVY_TYPE_CD saw_1, "Alerts View".STATUS_DT saw_2, "Alerts View".STATUS_DT saw_3, case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end saw_4 FROM "Common Productivity Reports for Alerts" WHERE ("Alerts View".STATUS_DT <= timestampadd(sql_tsi_day ,0 ,Date''5/26/2009'')) AND ("Alerts View".STATUS_DT >= timestampadd(sql_tsi_day ,-7 ,Date''5/26/2009'')) AND (case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end = ''Week'')')}

  Help me please if anyone knows.

  Hello.

  How to add zeros after selected value in a calendar dashboard prompt:
  http://108obiee.blogspot.com/2009/05/How-to-add-leading-zeros-after.html

  Concerning
  Goran
  http://108obiee.blogspot.com

• The level of data security issue

  Hello gurus:
  I'm having a problem with the level of data security.
  I have copied my Production RPD and Webcat in Test, changed the DSN connection pool and username/password.
  Now the problem is, a user has the same rights in Prod and test, is to see properly in Production, but sees nothing in the Test.
  
  I use a block of initialization of the Siebel CRM Application. If clients are assigned to users based on their responsibility to S_RESP and S_USER.
  on this basis, users can see the list of customers. Authentication is LDAP server even for production and testing.
  
  Now, a user sees correctly assigned in Production, but not in the Test list. I don't know how to solve. I searched query logs and other things, but cannot find anything.
  Please help me how should I study this issue.
  
  Thank you.
  Vinay

  Hi Vinay,

  I guess that your problem is due to the ORGS session variable. Can you open the repository and test the block of initialization for Associations? I'm sure that it contains no value of Test.

  On the logging level. I think that it is very convenient for you to have a user who logs level 2 or higher, in order to verify the physical SQL. But you use the same LDAP source for Test and Production, which makes things a little more difficult. So I would advise you to add an LDAP variable to fill the session LOGLEVEL variable. Create a user test with loglevel 2 or higher, and then set the loglevel for all users in 0.

  Kind regards
  Stijn

• How can I determine what digital data was issued last with the regeneration?

  Is there a way to determine the last digital data output if you are running a quick revival and regeneration?  Right now I use a digital channel not used by the channel with the same clock that I use for other data capture. It works very well and I know that the data I receive are correct, but there is something wrong with burning a channel for that. The data I am regenerating changes several times during the trial for counting samples to determine where I was in the buffer would make my code more complex and the chances of a mistake to increase.

  I have a mixture of material that I use for a cDAQ-9172, a box of series M and a PXI-1033 USB.

  Hello Tom,

  There is absolutely something wrong with having to use one of your channels to monitor what you're out, however, it's the best we can right now.  The problem is, when you set a buffer until the release, the access card to this memory stream location it will regulate.  It's speed leaving and overall card design.  There is no way back on the material for do what you are looking for and no software to interact directly with the location of the buffer.

• Turning off data roaming issue

  I'm leaving for the Canada in the morning and Verizon (after an hour on the phone with them) said that my account has been "too new" to offer any unlimited data plan.  So, it would cost me $2.05 / Mo, if I want to access the data.  GRR!.  Needless to say, I want to turn off while I'm there.  I swear it was obvious (for example, there is an option under settings / wireless & networks with a marked checkbox "activate data roaming" or something to that effect).  Now, under settings / wireless & networks mobile/network/system select this option, there is an option to "auto" or "original only".  I guess I want "original only" to turn it off, but since it might cost a small fortune to err, I thought I'd ask.

  BTW, how's that bury deep into the parameters and labelling it as somehow more useful than a simple checkbox to enable or disable?  I just don't understand.

  Go to Settings - Data Manager - the delivery of data - and uncheck data roaming.

  You may also uncheck data enabled since you don't want use given here right?

  Someone here struggled with just roaming data disabled during a trip across the world, so I would be closed completely data if it was me.

• Date of issue?

  Date is not assigned properly, as in the same no picture. Milis are equilaent to September 6, 2011, but it shows an incorrect date? Why is this

  resolved, probably the data was wrong...

• Date formatting issue

  Hi, I have a few incoming data as a string, but it must be converted as datetimestamp in 24-hour format. The problem is that if the day or month is lower at 10 it passes a single digit and I can't use to_date ('val', mm/dd/yyyy hh24). This works if the incoming value is to have two numbers for the day of the month and two digits for the month. Question: How can I format the date based on the incoming value dynamically. This means that if the single or double digits I should be able to convert without any error. For example. 2015/01/26 22:00 or 22:00 26/01/2015 or 2015/12/01 22:00 must be converted to the format mm/dd/yyyy hh24:mi:ss. Can you please suggest some methods?

  Thanks in advance

  It shouldn't matter. Oracle is smart enough to cope since the date parts are separated by a slash:

  SQL > select to_date (' 26/01/2015 22:00 ',' dd/mm/yyyy hh: mi am') of double
  2.

  TO_DATE (' 1/26/20151)
  -------------------
  22:00 26/01/2015

  SQL >

  SY.

• Creation date '1969' issue.

  Hello-

  I just posted a question in another thread, so I apologize for flooding the forums.

  I just came across a really strange problem in my archives. It seems that almost all my scans old film who live within Lightroom have had their year 'creation date' changed in 1969.

  Just to give you some information on my machine:

  I run a 2008 Macbook Pro 5.1 wit 8 GB of ram, 128 GB SSD for my boot drive and a 256GB in my old optical Bay that I use as a storage drive. I have Lightroom and all my apps on this disk "storage" for the storage of large files.

  
  

  I ran simple copy and paste backups for a while and then started to use Chronosync two years ago. I know that this problem occurred last year and I am sure it has something to do with Lightroom because of the information I could do appear in the metadata Panel.

  
  

  I have attached a bunch of screenshots below. I'd appreciate any help I can get with this... This is a really strange question. I'm fine with it now because all the files, that this problem has affected always have the correct creation date in their modification date. The files were also renamed by their created some time ago. It's only going to cause a problem when I try to sort records by year in bridge and which do not.

  
  

  All files problem (which is actually my catalog of films together Lightroom) waiting to be a big key Word session and DNG conversion. Then, I was planning on moving them to an archive player where they will live out there. I'm not too comfortable with letting go files in an archive with the incorrect date information... even if file names reflect the exact date... I feel just like it could cause a problem on the road.

  
  

  Please let me know if you need more information from me.
  

  
  

  

  

  

  
  

  The symptoms that you observe have nothing to do with LR.

  There are two different sets of associated with a photo date/times: times file managed by the operating system (Mac OS) and the time of metadata that is stored in image files and are defined by cameras and software applications as LR.

  The Finder shows you the time of files - the time that the file was created, and when it has been changed by an application.  Different applications handle the time of creation and change differently, and not all backup/synchronization programs maintain the time of creation and modification.  The creation time, shown in the screen shot, 31/12/69 19:00, is a time special is 01/01/70 0:00 UTC (assuming that your computer is currently configured on the zone IS), which is represented in many programs with the digit 0.  This suggests that one of the programs that allows you to copy your files has a bug and set the time from creation to 0.

  LR does not set file times - when it creates a file or it changes, Mac OS will fix the time of creation or change automatically at the present time.

  LR tells you the time that are stored inside the metadata of the image files, and the most important of them is what LR calls "hour of capture.  Cameras to set the time of capture of their built-in clocks, and LR metadata allows you to change the capture time by using metadata > command change the Capture time.  LR shows the capture time in the right metadata Panel and next to the thumbnails in the library.

  If an image does not have a metadata capture time, LR will use the file's modification time (older versions of LR used at creation time).  Scanners generally do not set the capture time, so, in that your screenshot above, LR shows the modified next time thumbnails.

  In general, it is dangerous to rely on the file times to represent information about your images - too many programs will do unpredictable things with those moments.  Use programs like LR allows to define the metadata of image capture time (when the shutter is pressed in the film).  Industry standards has also set a time of additional metadata, usually called "date/time digitized", i.e. when the original image has been digitized, that is converted to digital bits by a scanner.   LR does not all orders for digital time keeping (it is for the images captured by digital cameras), so if you need to maintain also digitized date/time, you will need to use another program like Exiftool (free).

• Apex 4.2: really simple SQL date of issue

  Hello
  
  Anyone can get this SQL query with the correct date for Apex syntax?
  
  Select * from table
  where datecolumn > ' 2010-03-31'
  
  I tried with #2010-03-31 #; I tried the dd-mm-yyyy; I tried the backslashes; I tried to use a date() function; and I tried cast() and I'm stumped.
  
  As far as I remember, I put the global date format in dd-mm-yyyy.
  
  The column that I need to analyze will finally be a timestamp with time zone column (for a plugin works).
  
  However at this point, I can't do a simple working either date column, so it's just a problem of syntax newbie.
  
  Help appreciated!
  
  Thank you
  Emma

  Hi Emma,
  because you use a literal string, you must specify the format;

  select * from table
  where datecolumn >to_date( '2010-03-31', 'YYYY-MM-DD')
  

  Kofi

• data center issues

  I have two data centers in a virtual Center and there is no communication between data centers. But I need to transfer at distance a V/M to a datacenter to another and vice versa... Can I download files from datacenter1 to the virtual Center and virtual data center 2... How is it possible... Please let me know if there is another way to transfer files from one data center to others...

  Aman says:

  I have two data centers in a virtual Center and there is no communication between data centers. But I need to transfer at distance a V/M to a datacenter to another and vice versa... Can I download files from datacenter1 to the virtual Center and virtual data center 2... How is it possible... Please let me know if there is another way to transfer files from one data center to others...

  Are you sure that datacenter1 cannot communicate with datacenter2 on the network?  What datacenter is the vCenter Server?

  Your options:

  1. turn off power the virtual computer and perform a migration of cold in all of your data center.

  2. power off the virtual computer.

  -Use the database browser to download the VM folder and store files on the vCenter server.

  -Using the browser from data store to download the folder and files in a data store in the second datacenter.

  3. you can use a tool third 3rd as Veeam FastSCP or WinSCP to copy the files and folder VM to a data store in datacenter1 in a data store in datacenter2.

  4. you could also use VMware converter to V2V the virtual machine then it turn off and remove from the source data center.

  If you provide more details or have any questions, I will be able to go further in these options.

  Robert