1 analog input cannot display this video mode

This seems to be a popular error. I read through many of the posts but can't find those specifically related to my problem.

I have a 4400 Dimension which has had a hard disk crash. I replaced the drive and loaded the Dell supplied successfully recovery disk. I leave then automatic patch run updates, and whenever I get to the installation of SP2, I get the error above that flashes and reboots the PC. I tried to load the patches manually and they work up to the point where you need to charge the cumulative SP2.

A local PC engineer ran a diagnosis which suggests that it was an error of e/s on the motherboard. I think that can be a distraction but it included for completeness.

Any help with this problem would be greatly appreciated.

See you soon,.

Steve

I know that answers to and old post, but after all the time that I lost, I thought I could save someone else some time. My scenario is different, but I'll put it here because my s, I received this error after literally years using jointly the same 1905FP monitor and laptop. My scenario is different, but I'll put it here because my monitor and the laptop are the two Dell. The only time wherever I received this error message was when I closed the laptop during the race and attached VGA/SVGA cable to your 1905FP monitor.  Always worked until I have connected my laptop to my TV and then returned to the screen.  Instead of unplugging the VGA to TV cable, I got a different to connect to the screen.  BIG MISTAKE.  This is then the error began.  The cables were indeed different.  If you get this error when nothing changed, check the monitor cable.  I'm not a cable expert so I don't know a VGA cable to the other / mine was an elder who did not have the extra cylindrical piece just above the caps.  The cord was also thinner.  It's only differences.  Give the other plug on, correction of the error.  Wasted several hours trying all the other suggestions.  Hope that this can save at least a person some time.

lkot

Tags: Dell Desktop

Similar Questions

  • Hi I have a new monitor but when I turn it on it turns on but then disappears and the middle of it, he says display something cannot get the video mode so u can help me change

    Hello

    My name is Karen, I just got a new monitor used, but when you turn it on, it turns on, but then you can't see something that he disappeared and in the middle of the screen it says u can not display this video mode, your help would be great thanks.

    Hi Karen,.

    Welcome to the Microsoft community. According to the description, you are not able to get the display on the monitor.

    ·         What is the full error message?

    I'll help you with this problem. I suggest you follow the steps in the article.

    Troubleshoot monitor and video card

    I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Computer stuck on error at startup "this program cannot display this webpage".

    Original title: Computor stick on error.

    When I start my windows xp, it goes through the normal process and goes straight to the "this program cannot display this webpage". Then, it freezes on it. How can I erase this.

    Hello

    I'll start by saying that, although I have met exactly the conditions you describe with the PC to one of my clients just yesterday, what may not be your problem.

    The problem was my client was caused by the weelsof.c Trojan horse.

    Attempts to start in SafeMode only a restart after a few seconds. Isn't the same case for you? Normal boot gave exactly the symptoms you describe.

    Somehow, I suggest that you look for the virus. I couldn't do it with the infected PC, so I had to remove the hard drive and a disinfection in another PC. I checked for the virus in turn with MSE, SAS and MBAM. The MSE analysis found and removed two files associated with the Trojan horse weelsof.c. The SAS and MBAM scans showed no malware. After re-installing the drive on the original PC it started as a customer would normally expect and another scan MSE (after leaving it connected to the internet for several hours) was also negative.

    If you cannot start in safe mode to scan malware for yourself, my methods may be practical for you, in which case a repair shop is your best bet, ideally one that you can get a recommendation for.

    Tricky

  • Web page display 'cannot display this page' not

    Hi - regular problems when trying to book tickets online etc - details are entered and submitted - pending the outcome "cannot display this page, check web address is correct, look for the page with your search engine, refresh the page in a few minutes and resolve connection problems" appears constantly.  This is happening almost every time I tried to get from my laptop was backed up 2 days ago.  Before saving, I've known a few occasions upon completion of online payments, the page fails as well - makes me very nervous as to if the booking/payment etc. crossed.  Why is it happening - I had an error message to check internet options for TLS and SSL are activated - do these options must be enabled I selected default TLS 1.0 and SSL 3.0 - can anyone help it's very frustrating

    Hi Crocker,

    Do you use Internet Explorer to visit Web sites?

    Deleting the browser history and check in mode no-addons will help you to solve the problem in most cases.

    Perform the steps mentioned below, if you use Internet Explorer to access the sites.

    "Internet Explorer cannot display the webpage" error

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Answer please if you have any questions.

  • After installing CF10, I get this error msg, "cannot display this page".

    After installing CF10, I get this error msg when I try to access the page administrator, "cannot display this page".

    I am on Window Server 2003, 64-bit with IIS 6.0.

    Before I installed CF10, I uninstalled CF8.

    Thank you Charlie for your entry. Len and we have understood, whether an authorization to issue mainly. After you have configured the permissions, we found later that IIS is configured in 32-bit mode (as suspicious as well by you) and CF is running in 64-bit mode.

    @Len: Please refer to http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/405f5bb5-87a3-4 3d 2-8138 - 54b75db73aa1.mspx? mfr = true

    Kind regards

    Anit Kumar

  • Satellite C660: message "this program cannot display this webpage".

    I need to use my phone to send what I have a problem with a laptop, I had barely a month ago
    Basically, when I start it up it automatically goes on a page and says "this program cannot display this webpage".

    It does not use Internet Explorer and it happens even when I'm not connected to the internet
    I can't get into the Task Manager or control panel is just a whole page with it.

    Hello

    Looks like you get a malware or a virus.
    Should start your anti-virus software and scan the system for some malicious software, etc.

  • Pavilion a6430F desktop: cannot display this page

    Read a recent post on "Apps does not connect to internet" and felt that I had a similar problem.

    I am running Win7, SP1, 64-bit, on a desktop Pavilion a6430F with 6 GB of RAM on an AMD Phenom triple core processor.  I frequently get "cannot display this page" on this machine on some pages.

    This does not work on my laptop HP DV2620 old Win7 32bits or my most recent HP Slimline 400 Win8.1 64 bit machines running.

    Here's a url for example that works on units of the latter, but not on the first.  http://www.Samsung.com/us/support/FAQ/FAQ00059191/81528/

    There is a link to live chat on this page: https://sales.liveperson.net/hc/49151746/

    When I click on this link I get the "this page cannot be displayed" on the unity of 6430.

    Is happening in other places, like the links recommended on research such as Ask or Google pages, albums, but this one lately not on the search page.

    Accordingly, I find only a specific computer that deliver the 6430.  Check a number of parameters against the DV2620 and apart from differences of 64/32 bit, all the settings in the following areas is the same: the settings of the firewall, internet options in the settings of compatibility, SmartScreen and IE11, withdraws. However this particular page is properly on the 2620.

    I turned all add-ons, on and outside (separately or in the past), reinstalled Java to the latest version, also added the url to trusted sites, and remove and reinstall IE 11 completely (remove personal settings) with the feature of Control Panel...  Don't know what else to try.

    There is no unusual apps or software installed. And it has worked before. Now I don't know if a fix IE 11 Microsoft may have changed something?

    Anyone who might have ideas, I'd be happy to exercise this operating system little more.

    Thanks for your time and your thoughts!

    Well, is there more to this story than meets the eye... my eyes anyway.  For those of you who like to do things to protect your computers, you can install an application called HOSTS BLOCK of MVPS.ORG.  Beautiful small DNS utility of blocking that keep a little of the junk in the side frames to display in web pages.  However, most of the reputable places have found ways to circumvent the blocking of the HOSTS file, so I don't see a lot of value for those who are really paying attention to their web browsing.

    BLOCK HOSTS. I overlooked the possibilities this would be the source of the problem. But, as I reset the HOSTS file in windows > system32 > drivers > etc fashionable original and empty the cache DNS (run ipconfig/flushdns) the universe turned right upward and the error message no longer appears.

    Also, you need to return the DNS services on 'automatic' If you choose to remove the MVPS HOSTS file.

    It's easy to do in the command run by typing "services.msc" (without quotes) click OK at the prompt and get off at "DNS Client".  Right click and select 'Properties' then click on the drop down arrow for "Startup type" and choose "automatic". Apply or OK, and then restart the computer.  Pretty easy.

    In any case, BH thank you for your help.  After I thought about it, it was bit of a duh, but I guess it was easily overlooked.

    BTW - if you want to continue to use the blocker HOST MVPS, there is a utility on the MVPs.org site called HOSTMAN who allows to turn the blocker host MVPS and disable. I have not installed or tried this, so I can't vouch for it. Maybe someone else can do?

    All this to say, everything seems to be in order.  Hope this helps someone else.

    Good day and Merry Christmas - happy holidays

  • Internet Explorer cannot display this webpage for any Microsoft Download or update

    Whenever I try to downloads or updates on Microsoft.com, I get the message "Internet Explorer cannot display the webpage" is for any download of windows updates to install silverlight, I am frustrated because some of my programs require the update!  Help please!

    I am running Windows XP, Internet Explorer 8

    Internet Explorer cannot display this webpage
     

    Andrea,

    http://support.Microsoft.com/kb/956196

    also, a FULL scan with MalwareBytes and SUPERAntiSpyware. (Free Home edition)

    http://www.Malwarebytes.org/MBAM.php 

    Reset

    http://www.SUPERAntiSpyware.com/

    Reset

  • Internet Explorer cannot display this webpage

    Internet Explorer cannot display this webpage, it is my problem. as a side note, I can use OE and play games online without any problem. On the same computer with a 'new' profile, I can navigate without problem but cannot use OE or OUTLOOK, I am running XP Pro service pack 3 with MS Security Essentials and Malwarebytes on a daily analysis. I reset IE8, (that is to say, options, advanced, reset) I ran the BHO Remover which is so widely recommended here on the forums without any problem. I ran sfc/scannow as admin also ipconfig/flushdns nbtstat nbtstat - RR netsh int reset r all netsh int ip reset netsh winsock reset deleted browsing history and made sure that doubling that all cookies are gone. Ran disk cleanup, then everything is represented. Still having the same problem after a 1 successful logon and browsing session. Suggestions out side of the nuclear option of reformatting and reinstalling?

    Assuming that all is well in the new user account, it can be easier to copy the data from the old to the new user account, and then delete the old.

    How to copy data from a corrupted to a new profile in Windows XP user profile
    http://support.Microsoft.com/?kbid=811151

    Alternatively, you can open a free support case by clicking on the link "Submit a case support" on this page: http://www.microsoft.com/security_essentials/support.aspx ... and then clicking on 'Submit a support case online' on the next page.

    PS: any particular reason you use OE and OL?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My computer says I am connected but my internet says cannot display this Web page

    Vista connection problem

    I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

    Hello, Scottyookiss00,

    Launch IE without Add-ons

    Start > type Internet Explorer

    Select Internet Explorer (No Add-ons)

    You are able to access the site now?

    If so, reactivate the modules one by one to determine the origin of the problem.

    Try the steps here:

    http://support.Microsoft.com/kb/956196

  • Problems connecting to the Inbox in Windows Live Mail email get "cannot display this page".

    Experiencing major problems in email inbox but no other problems with internet connections. Internet Explore doesn't keep saying "cannot display this page" it has that started happening in the last few days and is produced also from other friends so assume this isn't just a problem with my computer. Is that what I can do to fix it please.

    Submit all Live queries on the forum right here:

    Windows Live Solution Center
    http://windowslivehelp.com/

  • I keep looking for livingthedharma.eu, but says that internet Explorer cannot display this webpage.

    I keep looking for livingthedharma.eu, but says that internet Explorer cannot display this webpage. Why is this? There had to be a broadcast around the world from this site and I can't get it. What can I do?

    I keep looking for livingthedharma.eu, but says that internet Explorer cannot display this webpage. Why is this? There had to be a broadcast around the world from this site and I can't get it. What can I do?

    I keep looking for livingthedharma.eu, but says that internet Explorer cannot display this webpage. Why is this? There had to be a broadcast around the world from this site and I can't get it. What can I do?

    Try livingthedharma.org .

    If no go, take a look at the following MS Help & Support, which includes a Microsoft Fix It program:
    http://support.Microsoft.com/kb/956196

    t-4-2

  • "I can't access"https"sites using my Windows laptop, 8; I get "cannot display this webpage". error ".

    I have a new laptop (Sony) with Windows 8.  Straight out of the box with all the settings still on the default value of the factory.  But I can't save the laptop or set up as a computer built because trying to any Web site secure (https, IE) causes the nessage 'cannot display this webpage ".

    Original title: cannot access https

    Hi Bruno.

    I finally worked it was my anti-virus software that has a parameter for block access to https and the default value is 'on '.  Not useful.

  • Error message: no Start Page cannot display this Web Site no Start Page has been configured.

    Hello.

    I work with my client technology company to point their domain on the newly published site hosted on Adobe Business Catalyst. They get the following message when they try to point the domain to ABC...

    "No Start Page cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information. »

    This who should I tell them to do. Thank you.

    In the admin of the web site, change the page to the default page and set as start page.

  • "Cannot display this Page".

    Web site arrives as "cannot display this page" when trying to download Adobe Photoshop elements 11. Why would he do that?

    Hi SueZeeQ15,

    Photoshop elements 11 is no longer available on our site to download the latest version is v12

    Please try to download the direct download links available at: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

    But make sure you follow the very important instructions on the page initaiting before downloading.

Maybe you are looking for