10.11.4 update has a weird connection

Similar Questions

• Satellite L850-18 t has problems to connect to new wireless router

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  Posted by luka_10
  

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Windows Update has encountered an error unknown coed 80072EFE

  Windows Update has encountered an error unknown coed 80072EFE

  Hi Larry,

  I suggest you follow the link and check if it helps.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
   

• Vista has ceased to connect to Internet while XP works fine

  I was able to connect laptop computers XP and Vista desktop for a few years.  This week my Vista desktop becomes suddenly as a local connection to 'unidentified network' wireless so no Internet.  When I plugged the Vista desktop with a cable, that I could not he was looking for a username and password for the ISP to allow the connection.  Verizon technical support could not fix the problem - says no user name or password is required - with the lack of connectivity wired and wireless.  Is it just a Vista problem?  A recent update Windows change something that has caused this problem?  I noticed that this seems to be an unsolved problem here and on the Verizon forums.  It seems that this must be a Vista problem, due to the fact that XP has no problem connecting.  Thank you.

  Hi TinTheBear,

  Thank you for using answers Forum.

  In the future, I suggest starting your own thread about your question to get the right support.
  :]

  You can check for third-party wifi software that may have been installed with your network card.
  If it is running and you try to use Vista to control network and password/password encryption settings, they may sometimes conflict and causes this problem.

  Since your able to login in safe mode, I'm curious to know how you did the clean boot, you mentioned in your message.
  "Disable programs and services at startup"-copied from your post.

  Here is a method to try:

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• From a Windows 'auto update', I can't connect to my wireless router more? Any ideas?

  Automatic update has occurred about 7 days ago, and since my laptop restarts then it does not connect to my router Sagem "sky provided. I spent 40 minutes on the phone with technical sky earlier and tried loads of things, but without success. The result was that the laptop and the router were in communication but not allow me to use it effectively. But with the ethernet connected, all right? When I checked "what update" it seems above all to do with "Windows defender" - so I deactivated it and no change. Tried a 'system restore' but for some reason, the only points, he's going to give me are only 2 days ago and the update was on 27 February so that they are of no use. I'm stuck, I left mouth gaping sky and don't know what I can do. Can someone please help? !!

  Reinstall your wireless network card drivers. Find them in the website of your computer laptop mftr... Change your Windows Automatic Update to "notify me when ready" and to review the updates before installing them. Do not install the drivers from Windows Update. MS - MVP - Elephant Boy computers - don't panic!

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• 14/01/2016 of each update has failed me

  Original title: update 01/14/2016 of each update failed me , I do not know what's going on , but I'm really weird.
  

  01/14/2016 of each update failed me , I do not know what's going on , but I'm really weird.
  

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-AU/Windows/which-Windows-updates-installed#1TC=Windows-7
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  How to ask a question:
  http://support.Microsoft.com/kb/555375

• HP 3050 has failed to connect to the router Thomson SpeedTouch ST585

  Hello world.

  I bought a wireless printer in order to print from my laptop to every corner of my house.

  The installation procedure gently and the printer 'feel' my router, but all of a sudden he ejects a screenshot advising HP 3050 has cannot be connected possibly due to MAC filter enabled in the router.

  It is not so. My router, provided by my ISP, automatically recognize each wifi device (last week, I connected a smart TV without problem).

  The report of wifi 3050 a conferms that stage the MAC filter control has not been transmitted. There is no IP address associated with the printer.

  The ST585 menu is very poor and I can't find anything to activate/disconnect able to solve the issue.

  Please help me before I get this printer to the store (consider that I am not native English and not so good at on networks).

  Thanks in advance.

  Nost

  Hi Nost,

  I understand that you have a problem getting your printer on your wireless network. I will do my best to help you solve this problem. Could you please call your ISP to make sure that the firmware is updated, to ensure MAC filtering is off and if there is no reason why the printer is not connecting.

  I am also including this document to install the software of the printer for a wireless network connection.

  I hope this helps, let me know if you need more assistance.

  Thank you

• ASA-SSM-20 error: update automatic exception: failed connect HTTP

  Automatic update has worked for years, but it's not.

  I checked the sensor establishes a connection with the peer to https://72.163.4.161//cgi-bin/front.x/ida/locator/locator.pl

  ORC creds have not changed.

  What is happening here?  I have two sensors behave this way, btw.

  Thank you.

  John

  I had this at one of my clients. I dug into it and discovered the following:

  Cisco updated their SSL certificates certificates signed earlier this year to use SHA2. They are signed by a different root certification authority (Verizon if I remember correctly) and the IPS system image must be updated to the latest version (7.3 (5)) to approve of this CA root certificates.

  This is mentioned in the IPS 7.3 release notes (5):

  http://www.Cisco.com/c/en/us/TD/docs/security/IPS/7-3/release/notes/rele...

  • You need IPS 7.3 (5) to use the automatic update, global correlation and the participation of the network after the migration of the Certificate SHA-2 on Cisco websites.

• Java update has not completed windows error code 1603

  When I try to update Java on Windows 7 Pro 64 bit, the Setup program ends with an error message "Java update has not ended. Error code: 1603. Please consult the Help Center Java to correct that information or contact your system administrator. »

  Java Help Center is not useful. It indicates that this is a known issue and is being researched. This status is apparently true for over a year with no resolution, it seems as if not enough resources are devoted to research. The subject alluded to the possible incompatibility with Microsoft MS14-049 KB2918614 security update.

  I uninstalled KB2918614 and still the same error.

  I uninstalled Java 7, rebooted the PC and tried to install Java 8 and got the same error. Then I installed the update of Java 7 79 and it worked, but I can't go beyond Java 7 for an evolutionary support for Java edition.

  
  

  These all fail:

  JRE-8u45-windows - i586.exe

  JRE-8u45-windows - x 64 .exe

  JRE-8u60-windows - i586.exe

  JRE-8u60-windows - x 64 .exe

  
  Favorite using your search engine Internet web searches will bring up many people having the same problem, but no final solution. Variations on uninstall all versions of Java and re - install, change the language to English settings, remove KB2918614, use the Offline Installer, use the installer of auto update online, hack the registry, etc., but it's as if all of this is purely by accident lucky work around solutions and there is no real real an official answer as to what is happening. I tried them all and I still can't get Java 8 to install. I can't update Java.

  1. What is the solution to the 1603 error?
  2. If I stick with Java 7 forever?
  3. And although my OS 64-bit computer, must I install the i586 or x 64 Java, or both?

  
  

  Screenshots of the error:
  

  

  

  On a whim, I disabled McAfee VirusScan 8.8 and Alto! installing Java 8 worked.

  There is no message in my logs VSE VSE was the cause. However I saw messages clearly connected "would be blocked by an Access Protection rule (rule is currently not applied)" but in fact, they are apparently put into force and prevent the successful install Java 8. Or at least that's my theory.

  What's new on Java 8 and VSE VSE to prevent installation of Java 8?

  27/08/2015-10:32:03 would be blocked by an Access Protection rule (rule is currently not applied) NT AUTHORITY\SYSTEM C:\Windows\system32\MsiExec.exe common standard Protection \REGISTRY\MACHINE\SOFTWARE\MozillaPlugins\@java.com/JavaPlugin,version=10.79.2\MimeTypes\application/x-java-applet;version=1.7\Description: Mozilla & FireFox to protect the files and settings blocked Action: create

  and

  27/08/2015-10:32:04 would be blocked by an Access Protection rule (rule is currently not applied) NT AUTHORITY\SYSTEM C:\Windows\system32\MsiExec.exe common standard Protection \REGISTRY\MACHINE\SOFTWARE\MozillaPlugins: Mozilla & FireFox to protect the files and settings blocked Action: write

• New update has changed the behavior of the anchor points on the ellipses - frustrating!

  The new update has changed how anchors work on ellipses (at least - maybe other forms, too). It was I had the area around the ellipse and with the selection tool, I could drag the 4 anchors around the ellipse for the shape I wanted. Now anchors on both sides are working this way, but the other two across the entire ellipse! Is there a way to recover the old anchors?

  I also get a lot of weird behavior when copying and the adjustment of the ellipses. Sometimes the bounding box is around the new ellipse in that I paste. I have to go back and forth between the select and direct selection tool, and finally he will come to the top. :-/

  Thank you!

  Matt

  Yes, I see that they make in an arc/ellipse tool where you got the opportunity to make a thing of pie-chart-in searching for Pacman.

  In addition, reset the rectangle enclosing do not work on this thing.

  The answer is, they are slowly but surely adding more robust features for 'shape' elements in Illustrator. The difference between a 'form' and just a path in the shape of form, it's that a 'form' is made with a tool of shape as the Ellipse tool or a Rectangle, polygon, etc.

  Or a form can be made to take a path that meets the criteria: for example, a rectangle of any rotation that has 4 points at all the right angles. You can experiment by drawing your own rectangular path and lining up all the points so that your angles and lines are perfectly straight and using the object > shape > convert to the form menu item. However, if you add even one point back to the sides of the rectangle, the form will automatically extend to return to the regular way - which will be exactly the same in terms of the look you see on the screen.

  The difference between paths and shapes is that forms give you additional properties, which you can change using the area at the bottom of the transformation Panel. For rectangles, it's just the corners and the width/height, but for ellipses, it's now this pie thing.

  Anyway, even if I can't find any options to create shapes already developed using the shape tools, you can scale your ellipse using the transform tool manual (E) which dimensionnera the horizontal ellipse, or you can use the object > shape > menu item to expand whenever you make an ellipse. This could be done more quickly by recording an action and assigning a shortcut key, so you can convert out of any shape in a simple path.