10 8 ThinkPad windows sim card

Similar Questions

• SIM card cannot be detected on thinkpad 10

  I have 10 Windows installed on my thinkpad 10 PN 20C3001QAU Australasian model. Sierra mobile network is installed. The system does not detect the SIM card installed, but the Device Manager indicates that the mobile system works properly. I tried the SIM from my phone, but with the same result. This is the first time a SIM card has been inserted in this cushion. Wireless details are

  Model: EM7345 4G LTE

  Firmware: FIH160_V1.1_Modem_01.1349.12

  Type of GSM network

  Help with this problem would be appreciated gratefuuly.

  A problem has been identified where a SIM card cannot be detected in systems equipped with an adapter WWAN of EM7345 on Lenovo ThinkPads. For this particular issue, no SIM card is never detected.

  For help on this issue, please contact the Service of Lenovo for support and Service TIP #SF16-T0076 of reference / HT # HT501750.

  Thank you

• Windows 8 Yoga 13 have slot for sim card?

  Guys, dose windows 8 yoga 13 have slot for sim card...?

  Thank you 1 million for your time

  Note from Moderator: Edition subject to the content of the game.

  No.... this computer has no capabilities of 3G / 4 G/LTE... Just Wifi and bluetooth.

• Problem window appeal while clicking on the sim card

  Greetings of the day
  One issue that I am facing as the day I bought my Xperia peripheral aqua IE double m4 is
  Whenever I try to call, after you have selected the contact or call the number at the time of simcard selective option, it uses still stuck there, this selection of simcard en window flashes and disappeared, and then I need to select the contact and I'll choose the SIM card (where I have to call) this new pop-up flashes and turns off Sometimes I put one on 2-3 attempts and sometimes 10 to 20 times too much is not enough.
  So this is my humble request to you guys, please look at this and make me a solution or a software update with the solution, because I love this phone and Xperia devices, so that this question will not be able to force to that extent where I throw the phone out of the window I never want.i am a student and I have invested my hard earned money on this phone, I think that now you can get an idea of my attachment with this phone, so guys please help me out of this problem.
  You are looking for a positive return as soon as possible.

  Thank you

  Follow this link, you can read how to start in safe mode:

  https://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/TD-p/348008/jump-to/first-u...

  In short, safe mode is a special way to start your phone on without load the extensions or app at startup. It's the best way to check what the problem with the phone as no apps will interfere with the operating system and the device.

  If the phone act normally in safe mode then the question is an application installed on your phone.

• How to use the sim card that comes with my thinkpad tablet 3G version?

  I got my tablet from newegg and my Tablet comes with a sim card AT & T, how to use this map? I have to go to the AT & T sign a contract and activate store? I'm in the United States
  Thank you!

  At & t will put you on a laptop data plan which is more expensive than a plan of "ipad." If you can, find an IMEI of an Ipad and use the sim card number and the IMEI number of the Ipad for you sign up for a plan of cost reduction. Call them to implement. Using an online form or walk into a store At & t will be very frustrating.

  PS: it is there no contract that your device is not supported by anyone - you own. It will be a month of service. If you don't sign up, free of charge.

  What, the bonus is a kick butt gps integrated 3G wwan card. Enjoy!

• ThinkPad Edge with card WWan Gobi-2000 (no sim card installed)

  When I put a SIM card in the card holder. The software Lenovo says "no SIM installed".

  It's a card SIM KPN (dutch). If I look on the internet I can only find information on this controller to work with Vodafone cards. What is my problem?

  Is that what all do I have to change my settings, or whatever it is? When I use the SIM card in another USB WWan device it asks to enter a PIN. When it's the lenovo, it says that "no sim card installed."

  I hope someone can help out me.

  Thnx for the support.

  OK I found the solution on my own!

  It works fine now. After a while of search x_x

  It was just the sim PIN code. There was a pincode 0000 on the chip stock. I had to remove the PIN that using my cell phone.

  Now, I can finally use my Wwan card!

• X 230 technology Ericsson mobile broadband works only with 3 SIM card

  I just got my ThinkPad X 230 (which is adorable!) and bought a 3 SIM card to use with the Ericsson mobile broadband, I've specified with it. Lenovo access connections displays the transmitter 3 and tries to connect, but I was not able to work at all. Any ideas? It starts by not being able to find the provider, but changing 3 3-3 GPRS, EDGE, HSDPA, 3 G only results in a connection failed and the log of the errors below. Any ideas? I don't know if there is a problem with the hardware, SIM card or something else:

  connection status: not connected
  Cause: DHCP server does not.
  Error code: 031
  Recommended action:
  The DHCP server on the network has failed to demand of your system for automatic configuration of IP address. To force another query, click on repair. If the problem persists, contact your network administrator.

  If the problem persists, contact your network administrator and information troubleshooting below.

  Card details
  ***************
  Name of the H5321 gw Driver Mobile Broadband adapter
  WAN adapter type
  Adapter speed 7.2 Mbps
  Enabled the card status
  Connection status disconnected

  Internet settings
  *****************
  Internet Explorer settings
  Homepage
  The proxy settings
  Automatically detect settings? Yes
  Use the automatic configuration script? NO.
  Bypass the proxy for local addresses? NO.

  Information System
  ******************
  System model 2320CTO
  G2ET32WW of the BIOS version (1.12)
  Version of the operating system Windows 7 Service pack 1
  Version of dial-up connections 5.95

  Global settings
  ***************
  Network
  -------
  Allow Windows users without administrator privileges to create and apply location-> No. profiles
  Allow the radio wireless LAN off when idle-> No.
  Activate autodeletion of unused profiles-> No.
  Disable the community function of Peer to Peer-> Yes
  Turn on SMS-> No.
  Allow selection of location with Fn menu profiles + F5 On Screen Display-> Yes

  Notifications
  -------------
  Display the ThinkVantage Access Connections status icon in the taskbar-> No.
  Display the icon in the taskbar-> wireless status no.
  Show the progress indicator window when a profile is applied-> Yes
  Access connections see the gauge in the taskbar-> Yes

  Preferences
  -----------
  Enable sound effects-> No.
  Enable animations-> Yes
  Do not display the connections system tray icon tooltips to-> Yes
  Do not display ToolTips for gauge-> Yes logins

  List of switch automatic location profile
  *****************************************

  Register automatic switching Ethernet connections and prompt me to save the Ethernet ports-> Yes
  Favorite place of the WLAN-> No.
  When there is no other connections, connect via the WAN wireless or WiMAX-> Yes
  WAN or WiMAX profile name-> Broadband Mobile
  List of priority wireless
  ----------------------
  Name of the priority of selection command connection connection details location profile
  ------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log file
  ********

  Debug log is disabled

  Have now resolved myself:

  (1) create a system restore point
  (2) uninstall the mobile broadband and centrino ultimate-N driver in Device Manager, but keep the files
  (3) restart
  (4) access Lenovo Connections connects to mobile broadband. It is then just a matter of go and connect to the wifi also.

  Everything works beautifully now and switching between wifi and mobile automatically. I think it was just damaged TCP/IP settings in one or two adapters.

• Built-in SIM card problem

  Anyone heading the question where they took contact with care of apple and the representative on the other end does not have the product you are calling for?

  I recently had to replace my iPad 9.7 Pro at a local Apple store warranty. There was a glimmer of hope in the quadrant display cooer right. It was not extreme, but once I have the sewing, my eyes always went straight to the it later. Given that the unit was only a few months, that I wasn't old too satisfied to "just deal with it" then I won him in and ultimately they replaced. There is one thing that I like Apple, they really take care of their customers. Then I proceeded to drive home and get on the phone with AT & T to activate it, because the iPad was originally purchased at home and put on my plan.

  After getting nowhere with AT & T customer service they transferred me to Apple Care because I didn't have an ICCID under settings/general/to words. After connecting the Apple Care representative I explained the problem. To my surprise, he had no idea on the SIM Apple integrated and kept asking me where was my old SIM and I need one to get cellular service. Now, I knew that this was not correct and I've tried very carefully explain that there is no SIM external it was enabled on the embedded SIM card, however, they guy fought me on it and sounded quite confused throughout the call. I also tried to activate it under the iPad option settings/cell/Add cell phone carrier/transfer again. This option does not work for me, because it has to do with a different plan type (I have or the representative didn't know) he says also my user name and password are incorrect, but it wasn't. I logged in full on the site without problem. As a result of this he told me to change my password for AT & T and that has not worked, it wouldn't have worked anyway, but now I know, it's just so that you can see the traces of events here. I was then left on hold for 15 minutes be say I have to call my service provider.

  Just for the forum of reference for the iPad all Pro (to the United States at least) are made with a built-in SIM card, but also have a nano SIM tray for travel abroad. For those who don't know no way "embarked", it is built in the electronic device and is not removable. Why do that and do all sorts of confusion? It is designed to allow a smaller unit and is supposed to give more options for the selection of a carrier.

  To resolve this problem, I took my replaced iPad 9.7 Pro at my local AT & T store the next day (today) to configure the built-in SIM card. They had me past in less than 5 minutes. Namely, if someone runs into his question, you need to tell the person you talking if theres no ICCID then its either one wifi device or if you are using a device with a built-in SIM card. They will have the provision to the CSN, which is a very long alphanumeric number located in settings/general/to comments made by verses the low only with the IMEI (obviously).

  I'm just surprised that the 'experts' Apple Care had no idea what the hell I was talking about. I am an engineer 'EM and work on industrial equipment. Also, I have a technical support for hardware, software, networks and applications, so I have a bit of history and know how to get my message. I too am a former user of Windows and Android who migrated to apple for its ease of use, robustness and quality, and outstanding customer service. I now own the iPad Pro, mini iPad 9.7 4, Apple TV (3rd generation) and Mac Mini (late 2014). All of which are excellent products that I use every day and that he loves her. I also participates actively in the public beta program Apple with iOS 10 and Sierra of MacOS. Apple, if you listen... Take note that when a supervisor does not know the iPad Pro is manufactured with a built-in SIM, theres a problem.

  What do you think?

  * Comments *.

  'Use the form below to send us your comments. Read us all the comments, but please note that we cannot respond to the comments you submit. »

  http://www.Apple.com/feedback/iPad.html

• HP Compaq mini 110 c-1010ER: Connector for SIM card in the laptop

  My friend gave me a Compaq mini 110 c-1010ER. Looking at, I found the connector for the SIM card. I inserted the SIM card, but the system does not detect. Please help to run it.

  I tried, but on Windows 8.1. I install Windows XP and try it.

• Portege Z10t-a - SIM card is not detected after Win 8.1 upgrade

  Hello world

  I have a Z10t-A. Portege Toshiba Pro win 8.1 recently, just upgraded to 8.1 Win.
  Before the upgrade, I could use the sim card to connect to the VPN, but since the upgrade the sim card not detected. I use an application called "AirCard Watcher".

  I tried the latest version of the driver 'EM7305 '.

  Visit the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here:
  Laptop
  Portege
  Portege Z series
  Z10T-A Portege
  All the
  8.1 Windows 64-bit
  LTE pilot

  Now you should see two pilots LTE (5.2.1401.4045 and 3.5.1308.3911)
  I recommend you test the two drivers.

  Before you start the installation of the driver, the former current driver should be deleted.

• Portege R500 with 3G - Instructions for the insertion of the SIM card

  I have a model PPR50E R500 which I think has built in 3G. Howevere I can't find documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM card is inserted behind the keyboard. Can someone point me to some training documents please?

  Unfortunately there is no documentation available. (Maybe in the user manual, but if there is nothing, then you won´t find anything)

  Here are some instructions on how to swap the SIM card on a Portégé R400, so I think that since both machines are quite similar, that the guidelines would apply to the R500 too:

  Perform the following steps to insert/remove the SIM card:

  1. close the machine OFF completely. Make sure that the POWER LED is not lit.
  2. remove the AC adapter, battery and all connected cables/devices.
  3. open the screen.
  4. remove the keyboard cover with a small screwdriver flat blade in the small hole on the edge of the cover and pulling gently out.
  5. remove the two screws that hold the keyboard and knock it gently over the keyboard. (Use a small cross-slot screwdriver to unscrew the two screws).
  6. to activate the keyboard down, take the upper end of the keyboard, pull gently upwards and place the keyboard with the keys down on the palmrest of your machine.

  * ATTENTION: *.

  {color: #ff0000} + do not touch the keys on the keyboard to return back. Make sure that you hold the keyboard on both sides and ask gently down on the palmrest. +
  + The keyboard is connected to the machine with a flat cable. Avoid pulling the cable on the connector or damage! +
  + Avoid dropping objects (such as paper clips, etc.) inside the machine. A metallic object can cause a short circuit on the motherboard, which would cause serious damage to your machine. +
  {color}

  7. search the card slot SIM on the upper right corner of the machine.
  8. slide the locking mechanism of the SIM card with the fingernails or a small object slot to the left to unlock. (You can also use a small flat blade screwdriver)
  9 pull gently until on the SIM card slot.
  (10 a) Insertion: insert the card into the SIM card slot. The filings of the SIM card must show an upside.
  (b) removal: remove the SIM card from the slot

  11 turn the slot down and block it by sliding the lock to the right.
  12 insert the keyboard by placing the clips on the bottom of the keyboard into the grooves on the top of the palm rest. Rabat the keyboard gently downwards and fix it by screwing the screws into the holes. Make sure that no screws were dropped on the inside of the machine!
  13 install the support of keyboard on its position and push down to fix its position.
  14 attach the adapter sector, battery and all cables/devices.
  15 enable you wireless device by pressing "FN + F8" when you work on Windows.

  * I must warn you, it s on your own risk and if you do not feel comfortable with the installation procedure can put the machine to an authorized Service provider, which can make the installation of the SIM card for you.*

  Good luck my friend :)

• Release of subsidy, without the use of another carrier's Sim Card. ?

  I thought that I ask or ask this question, coming from Blackberry in general what you were doing was passing by AT & T, they unlock you in contact with the Dept, they you some inputs enter keys and you got the unlock screen, enter the Code and its been bingo...

  I am planning a trip abroad and want to unlock the phone before making the trip.

  Obviouslly Android is different from Blackberry. Anyone know if its possible to unlock the Atrix2, without having to install an another SIM card from another carrier, is there an enter key sequence that gives you the opportunity to do?

  Thank you in advance!

  I finally received an email from a senior to AT & T about the unlocking process and a process. There is no 'touch' in order to access the unlock window

  You must power down, place another carriers SIM card in the Atrix2 and the power upward, it will present you an Unlock window. When you do that, you enter the code to unlock.

  Gives you 5 chances to do so, otherwise, the phone is locked permanently in the AT & T networkand at this moment it's undoable.

  Thank you

• Carbon X 1 SIM card not detected (Sierra EM7345 WWAN modem)

  Dear all,

  I have a X carbon 1 with Sierra EM7345 WWAN modem. It is that everything installed perfectly - drivers etc. But id does not recognize the SIM card. I googled a bit and I can say that:

  (1) I have the drivers OK, I the WWAN etc network adapter.

  (2) I inserted the SIM card

  The SIM card works perferctly if I use the key USB 3 G stick instead. So the problem is not the SIM card.

  In my view, there are a few configuraiton Sierra modem that should be done - to switch to 3G / 2G or something.

  Please help - one of the main reasons to buy this laptop was the integrated WWAN.

  Thank you. Here are some screenshots with the config:

  

  Win7 is a better OS in our case for troubleshooting.

  Do you see a broadband network connection manager window (VAN UI)? Check the APN settings.

  Could you install Lenovo's Access Connections on the laptop?

• X 201 use of the SIM card

  Hello

  I use X 201 laptop Thinkpad, type 3680.

  1. I would like to know if the WWAN card is pre-installed?
  2. If not, would like to know if there are any available location that allows easy installation?
  3. If the laptop must be opened, please suggest a link as a guide to install the WWN card.

  I apprecite your help.

  Thank you!

  Hello

  1. go into Device Manager, point to adapters. Or look at the Lenovo support site (http://support.lenovo.com/en_US/downloads/default.page?), press 'Edit', type in your mobile MTM. If the word "WWAN" persists in the brief decription it means wwan card shoul be preinstalled. If you will see "WWAN option" or "WWAN ready" it means laptop a wwan and only SIM card antennas. If you will not see the items as I mentioned above, you must install wwan AND wwan card antennas. I'm not sure that the sim reader, in this case, persists or not.

  2 x 201 a wwan slot, mini pci-e

  3.1 hardware Maintenance Manual - http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x200_x200s_x200si_x201_x201i_x201s_hmm_en...

  3.2 x 201 video service is not loaded on support site. But there are x 200 video course, I hope that it will also be useful.

• How can you unlock or implement an iPhone without a sim card

  How can you unlock or implement an iPhone without a sim card & apple computer laptop?

  You need a SIM card, and if the phone is locked to a carrier, the SIM card must be that carrier. It doesn't have to be an active SIM; It may be one that has been disabled. You don't need a laptop Apple; You can activate Windows 7 or later, or Mac OS X 10.7 or higher.