10 data kech. / S for 28 channels

Similar Questions

• No data in WMC EPG for some channels after Microsoft abandoned zap2it to Rovi Corp. as a supplier EPG

  I received no data after July 21 in my EPG WMC of zap2it.  I have reset the TV signal using a slightly different zip code.  Now, I get ABC and Fox, Rovi data instead of zap2it, but not NBC, CBS and CW, which is a secondary string of the NBC Channel.  NBC and CW are 5 RF channel and CBS is channel RF 11.  These strings are not in the original configuration, I guess because they are not in the database of Rovi EPG for my region, Tri-Cities, TN-GO TNT antenna.  They are a search for additional channels and the signal strength is 100%.  But there is no data to guide them.  When I try to change the source of the list for the channel, it is said ' Don't Show no ads for this channel.

  the right people read reports on Connect. I know people are frustrated. I can't support, sorry.

• 2% USB 6361 C sampling for 8 channels

  What is the maximum rate for playback at the same time 8-channel USB 6361 map?

  I read the specification, and there is a line that says:

  Example Maximum rate... 2.00 MS/s single channel,
  1.00 MS/s multichannel (aggregate)

  When I tried to read 3 channels with sample rate 1 MECH. / s I have error: "Conversion ADC tried before the prior conversion was complete.
  I did some tests and it seems 500KS/s is maximum for 4 channels and 250 kech. / s max for 8.

  Am I missing something or is this how it works?

  aggregate refers to the total number of samples.

  This card uses a multiplexer to switch AD converter between the channels. SO not really simultaneous reading!

  One channel, no switching, fast 2 ms/s

  several channels: 500ns time to pass & set between channels, up to 1 ms/s left altogether, but you can read CH0, CH0, CH1 and CH2 that would give you 500kS/s CH0 and 250 kech. / s for CH1 & 2

• Windows Media Center lost information Guide for some channels, but it is still on zap2it

  Why Windows Media Center (WMC) is no longer a information Guide for some channels, when she used to have?  WMC uses the information from zap2it.com and zap2it.com still has the elements of programming for these channels.  The Guide has "No data available" for all the hours for these channels.  For Los Angeles area broadcast, channels of first importance are 40.2 by 40.5 (40.1 is very good, as evidenced by the correct include titles and descriptions).

  Please let us know

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298

  Please mark as answer if that answers your question

• How to find dates of purchase for Portege R200?

  We currently start laptop computer ownership with our machines Portege R200 and need to know the dates of purchase for these. We have our serial numbers and we owe it to the place where or what website to go to type the serial number and to know the purchase date of the machine with this serial number. How is that possible?
  Please email [email protected] with any help. Thank you!

  Hello

  I think that this can be managed by the Service of Toshiba partner.
  If the user has saved the unit so usually the service partner should be able to verify the date of purchase.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• PXI 2720: Conection for Multi channels

  Hello

  I put implement the multiple channels with resistance adjustment at the same time.

  It is good to use '2720 Soft Panel', but I couldn't find the way to set up on my own Labview program using 272 X reference live

  For example, I want to implement chan0 (80 ohm), (120ohm) chan1, chan3 (100ohm) etc.

  I tried on one channel at a time. This is to give the new unstable resistance...

  Is it possible to using X 272 screw reference?

  Should I use "palett Ni272x-> advanced-> ni272x relay control multipe" fuction for their implementation?

  Thank you

  Insuk

  Hello Insuk,

  The NOR-272 x Resistance.vi for example is a good example of how define a single channel - to set multiple channels, call the 1Chan resistance ni272x 1Samp.vi to write for each channel you want to adjust.

  Make sure you that you connect also each channel to the connector had TO plug into the front panel when you need to use it.

  Here is an excerpt that should define a multiple channel resistance and connect these strings to the façade had TO connector:

  

  Note: you can set the resistance without connecting to the connector HAD / DMM and then only connect to the connector HAD / DMM when necessary.  I noticed that the '272 x Soft Front Panel' does not display the resistance of the channel if its not connected to a connector - the code snippet above to display the correct resistance in 272 x Soft Front Panel, but will also each channel link to the front panel.  Make sure what you want to do this before starting the extract.

  Make sure that you aren't opening and closing of the session each time you call the resistance VI write, this could cause you reset the unit each time, which would be left to zero all the other channels.

  momo2013 wrote:

  I tried on one channel at a time. This is to give the new unstable resistance...

  I don't understand what you mean by «Who does give the new unstable resistance...» "If the code snippet above does not work, can you clarify on what is happening.

  -Marshall G

  National Instruments

• How to get the date of deployment for the RT code?

  I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?

  Thank you

  Martine

  Hi John,.

  You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Definition of various mitigating factors for each channel on the virtual bench MSO

  I'm trying to measure two very different signals, using both channels of the 8012 virtual bench programmed in LabView. The signals are very different amplitudes, which means that the definition of the vertical range for the largest signal is not truncated causes the smallest signal to become very agitated that the resolution today is very low. The only way I know to use two channels simultaneously is to index the waveforms with channel number when the measurement is complete. This means that both channels of parameters are defined at the same time by the same command sequence. Is it possible to set separate settings for each channel during intialize?

  I enclose my referral program that there is much more than just this part. If someone need clarifications just ask!

  Thanks in advance!

  Kai

  I thought about it. If anyone runs into this problem let me know and I can show you how I did it

• Update fail, have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.

  I have Windows XP Home Edition Version 2002 Service Pack 3.  I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.  Is it possible that updates sent me are for the 2003 Version?  Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?

  CrystalBall © SEZ...

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• Impossible to change the Data Execution Prevention for a specific program

  Original title: Data Execution Prevention

  Hi, can't seem to be able to change my Data Execution Prevention for one of the programs that I'm running. I followed the instructions from microsoft, but nothing happens. Can someone help? Thank you.

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an addon or another program causing the problem and you
  must verify that 1.

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If a doubt
  program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and
  run - not all are bad but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and which would be
  stands with Prevx running except for a cookie of occasional low level (not a big deal), the update
  and then execute it as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  Data execution prevention Internet Explorer Windows 7 included - several methods here difficult
  http://HubPages.com/hub/data-execution-prevention-Internet-Explorer

  Feature Data Execution Prevention, or DEP in Windows Vista & Windows 7 - see also the links to the
  at the bottom of this page.
  http://www.WinVistaClub.com/F33.html

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program of Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Options - Advanced Options - Internet Security Section - clear the check box enable memory
  Protection to mitigate the attacks online - APPLY - OK close and restart IE

  Hope this helps. |

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• lost sound for a channel of tv media Center in vista

  Hello world
  Have had my cable is split into a TV and my computer.  My computer using Vista and is updated.  This Setup has worked well over the years.  A few weeks ago a tv in media center channel lost his.  All other channels are fine.  My TV has sound for all channels.  I replaced the splitter and still the same problem.  I think media center units must be reloaded in my computer.  This problem can be corrected by removing and reloaded in my computer?  Or is there another place I have difficulty?
  Thank you

  Hi 01starsky,

  Cause of this problem

  This problem occurs because the Media Center always tries to play an (Arc consistency #3 algorithm) AC3 (Dolby Digital 5.1) audio stream that is present in a show. The AC3 audio stream offers the best quality audio experience. Some stations broadcast the required primary stereo stream and the AC3 audio stream option. If Media Center detects that an AC3 stream is available in the broadcast, Media Center selects that available stream. Some broadcasters may broadcast empty or muted AC3 stream. So, if a broadcast contains an AC3 stream, but no audio is present, Media Center has no sound for that specific channel.

  Currently, Windows Vista doesn't have an option to force Media Center to use the main audio stream when a muted AC3 stream is present. However, you can contact the broadcaster and report the muted AC3 stream.

  Reference:

  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound

  http://support.Microsoft.com/kb/929515

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

  Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

  In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

  My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

  Suggestions have greatly accepted.

  I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

  The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

  Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

  I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

  Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

• Auto date and time for London is1 day and coming 7hours. How can I change?

  Auto date and time for London is1 day and coming 7hours. How can I change?

  Original title: Date and time

  Hi JoannaHerriott,

  I suggest you to see the following link on the pendulum to the point options Windows 8.1.

  Windows 8.1 and Windows RT 8.1 clock options
  http://Windows.Microsoft.com/en-us/Windows-8/clock

  Post us the results after trying the steps above.

• I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  Please see the compatibility on each module table because not all will be compatible with PS CC 2014 and therefore do not list in the extensions under this version of PS Manager.