cq58: computer hp laptop to turn off mode
I forgot the password and now I get a disabled system 70111473. need help
Please enter
65879475
Kind regards.
Tags: Notebooks
Similar Questions
-
computer connect laptop tv turns off the color scheme
original title: computer connect laptop tv
When I connect my laptop to a plasma tv via the vga cord input, the color on the TV set is switched off. I have used other vga cables and it hooked up to TVs and it is always. the color is fine on pc and tv until the hook u both together, what should I do to correct this?
VGA is not the best way to connect them. If you have an available HDMI connection use.
-
I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: disabled
10/04/2013-17:44:54
MBAM-log-2013-04-10 (17-44-54) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 271656
Time elapsed: 43 minute (s), 42 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.(end)
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: enabled
10/04/2013 23:43:49
MBAM-log-2013-04-10 (23-43-49) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 269636
Elapsed time: 49 minute (s), 41 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.(end)
I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:
Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
WinSock statusattmpting error information to validate the Winsock base providers: 2
error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
user redirection of information in support of the appealDiagnosis of network adapter
Network location detectionInfo to help home Internet connection
Identification of network adapterInfo network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
Info both Ethernet connections and wireless available, ask the user for selection
required user input action: select network connection
Info Wireless connection selected
State of the network adapterInfo network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivityWARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
error could not make an HTTP connection.
error could not make an HTTPS connection.
error could not make an FTP connection.
Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.
Hello
Follow these methods.
Method 1.
Start the computer in safe mode with network and run a full scan of computer viruses.
To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 2.
If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.
Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software
What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 3.
You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.
How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
My Lenovo laptop not turn off or do anything I told him to do.
My Lenovo laptop not turn off or do anything when I hit restart, stop, sleep, switch user, log off, lock or Hibernate. I can not even use the keys CTRL + ATL + DELETE the order and I have no idea what to do. and I already uninstalled Norton due to previous questions posted here.
Hi DylanCole72,
· Did you do changes on the computer before the show?
· You get the error message?
· Which model of the laptop?
Follow the steps in the article.
You cannot log off, restart or shut down your Windows XP-based computer
Advanced Troubleshooting for shutdown problems in Windows XP
-
I have wrt160n v2 router wireless, it does not work for me.
If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.
If the laptop is turned off, I have no internet on the desktop, always connected via the router.
The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.
When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.
I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.
Can someone help me, I don't really have time to be on the phone for hours figure this all out.
Thank you
Jackie
go to http://audipages.com/router/ and follow the instructions
-
Recorded a few videos in mode low consumption. There is no audio signal in one of them. Low-power audio turn off mode? I'm a new user of iPhone still learning on the dev
Hello taneikab,
Thank you for using communities of Apple Support. It is my understanding that videos created on your iPhone in low power Mode are missing audio. I know his is a very important part of videos. I'm here to help get this resolved with you.
Low power mode disable audio, so you should be able to hear sound on records. I recommend that you test your microphone using the instructions and images in the link below.
Get help with the microphone on your iPhone, iPad and iPod touchIf the microphones work, but the problem persists, restart your iPhone. This can solve many unexpected behaviours. Follow the steps below to restart.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
Restart your iPhone, iPad or iPod touch
Here is some more information on what to expect in low power Mode.
On iPhone Mode low power on your iPhoneHave a fantastic day!
-
My computer it does not turn off when I go early and turn it off?
My computer it does not turn off when I go early and turn it off? u can help me, please!
Hello
· What operating system do you use?
· Did you do last changes made on your computer before the show?
If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:
You can't do a computer that runs Windows 7 stops or sleep
http://support.Microsoft.com/kb/977307
If you use Windows XP, see:
You cannot log off, restart or shut down your Windows XP-based computer
http://support.Microsoft.com/kb/831431
See also:
Turn off a computer: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions
-
can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop
You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK buttonMultiple monitors: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questionsSet up multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitorsUnderstanding multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors -
The computer screen does not turn off after the specified power Options
I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.
I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.
-
I would like to have my account for photoshop elements 9 off, because I changed my computer and didn t turn off it until I removed it. Can I do it myself or someone has to help me?
Moving to download, installation, setting up
Hello
Learn how to enable or disable Adobe applications refer
Hope that helps!
Kind regards
Sheena
-
Computer DV7-1825dx laptop screen turns off at least connected to the HDMI
I have a Pavilion dv7-1825dx running Windows Vista Home Premium 64-bit. The other day, I simply closed the laptop into hibernation. At the time, it was only connected to a printer and a wireless mouse. The next day, I opened the laptop and it turned on but the screen stays off. I shut down the computer by holding the power button and then turned back on. The screen appeared and asked me if I wanted to start Windows normally. Then, I got the loading screen for Windows. As soon as he was done loading, the screen turns off and the chime sounded for the login screen. I repeated again than having the same problem. I typed my password, but the screen stays off. Because I often hang my computer to our TV via HDMI, I thought I would try it, and that is, both screens lit. I then disconnected the HDMI cable and the computer screen exploded again. Plugged into the HDMI and activated. I went into options for NVIDIA and noticed that there is an analog display with the screen of television and laptop (up to three screens on the list). I restarted in safe mode, and the screen of the laptop works great.
Any ideas on how to solve this problem? That I can not connect my laptop to the TV whenever I want to use.
Thank you advance!
http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-285.62-WHQL-driver.html
Save the driver on the desktop and install it from there, not in a temporary folder.
Create a Windows restore point before starting.
During the installation of the new driver, click on "Custom" and there will be a link to uninstall the old drivers and all of your current settings, this before you install the new driver.
-
Satellite P10 - 802 - CD when the laptop is turned off?
Hello
Apparently, my laptop can read audio CDs while it is turned off using the audio buttons dedicated next to the cd player.
He says in the presentation of the product and also the manual.
I don't know how to do. can I just put it on a disk before you turn off the power (if not, I can't eject the disc)?Then I press play?
Hello
I think you should read carefully read the user manual, because you can find all the information on this subject in Chapter 4-8:
If your computer is on or off, CD/DVD/audio control buttons are locked by default. To unlock, press the CD mode / digital for more than 3 seconds. Press the CD / Digital again for more than 3 seconds to block them again. When the CD mode / digital is unlocked, press CD mode / Digital and digital briefly to switch between the CD mode. The system LED status indicator will show you how you are.
For more information see the user manual and if you n t have it you can download it on the Toshiba site.
Welcome them
-
Satellite A200-1CR - computer lights up after turning off
I have a strange situation. After the computer is shut down it turns on automatically. This situation occurs only when the laptop is powered by the AC. When using battery I can turn off. It seems that the reboot of the system.
Unfortunately if I want to swtich off I have to disconnect the power supply.
Has anyone had problem like this?
This happens if you Wake up on LAN enabled in the BIOS. Check the BIOS Wake on LAN and also disable USB Sleep & Charge.
I had the same problem on my PC and after that I disabled Wake up on LAN in the BIOS, it worked!
Check it! -
Hello!
I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.
Hi @Phanz,
Thank you for your inquiry.
I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number. You have removed the battery while the laptop is running. Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%. You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.
You did all your Windows updates?
Have you tried the troubleshooter in Windows?
First of all, I would like to try a Windows restore to before remove you the battery.
HP computers - using the Microsoft System Restore (Windows 8)
If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).
Then you can try the following steps.
HP laptops - test and calibrate the battery (Windows 8)
The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.
Step 1. Go to the Device Manager
Step 2. Select the stacks
Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
Step 4. Click on uninstall
Step 5. At the command prompt, put a checkmark in the box to remove the current driver
Step 6. Shut down the computerStep 7: Remove the battery for a minute and then put new
When the computer returns to the top it should automatically find the driver.
Step 8. Go to the Device Manager
Step 9. Select the stacks
Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
Step 11. Click "automatically search for an updated driver.Do the same thing with embedded controller compatible ACPI Microsoft.
Last option is to reinstall your Windows 8.1 Pro.
Good luck!
-
Computer Windows will not turn off
original title: pc does not want to swithc offPC does not want to swithc off
What kind of PC you are using? A desktop or laptop computer?
By "doesn't turn off" do you mean that you cannot close it in the start menu? or you can't even by pressing the button on your desktop/laptop?
If you can turn it off in the start menu then your power button is damaged, and if you can't spend it in the start menu then something is wrong with your operating system.I hope I helped!
Alex
Maybe you are looking for
-
HP 2000-425NR - data recovery HARD drive failure?
Sorry for the double posting, but didn't know what page to put this. I have a portable 11 day old who just today locked the windows logo. restart of takes me to the Startup Repair, which is no problem. system restore failed. ran test HARD drive and s
-
System is ask for administrator or connect password and its only accepts not that I put the password. Receive this 50675536 system deactivation code, please help.
-
This happens if I click on a file or a file that is already open. The opened file will blink in the taskbar, but does not open on the top of any page is currently on the screen. When I click on previously open programs bring them on top as usual. Ope
-
The E900 has the ability to act as a wireless bridge? If so, how I would establish that.
-
Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.
original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F. Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information