10 Windows Installer can't get the computer to connect the printer to the 8600-eAIO N911g.

Similar Questions

• WPC54Gv2 under Windows 98 - can't get the IP address on the network WEP?

  Hello

  I installed a WPC54G v2 adapter in a laptop running windows 98. I connected to work at a WPA network without problem. I came home and I tried to connect to the network, but you can't get an ip address.

  I know that the network has a WEP 64-bit password (I connected fine from another computer so I know that I have the right password). I compared the WEP key that the linksys client uses with the key in my router settings and they match. I can see the MAC address of the laptop as wireless to my router and linksys customer relationships it is connected to the router, but cannot connect to the internet.

  I tried assigning a manual ip address and using the automatic ip address with no luck. Any help or ideas are greatly appreciated.

  Thank you

  I think that I may have been too far from the access point to connect. I tried again today from another place and I am now connected. Thanks for the suggestions.

• Windows 7 can not get the fingerprint reader to show

  I have a T500 I removed Vista and installed Windows 7.   But now I can't the fingerprint reader will be displayed at sign in.   I think that I have installed the driver, but it does not appear.   I went into Device Manager and it seems to be responsible.   Any ideas?

  You need not fingerprint software from Lenovo. It's just another program that is running in the background.

  Windows 7 has all the functions that the software Lenovo offers. Whether you use it or not, it's up to you.

  in any case, to get the fingerprint logon to work, you must go into control panel > biometrics. Then you need to check "Allow connections to fingerprints" (or something of the sort). It will ask you to register to use fingers.

  The next time you start your computer/log, you will be asked to use your fingerprint to log. It works exactly as it would if the Lenovo program was there (with the sole exception of the sliding-finger-to-boot-computer functionality).

• 10 improvement of the way Windows Installer error then get the updates. ' FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  Hello community. I get the following error for 10 Windows Installer to upgrade. It gets stuck he display of 0% to get updates. What happens whenever I ran the media creation Tool.exe file in my computer. Someone out there has experienced this problem and found a solution? Thank you in advance. Should I disable the Antivirus and Smart Firewall Norton Security? Thank you.

  FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  It's the whole error line:

  2016-07-26 15:13:42:134 2992 200 Agent WARNING: has no rule Installed, updateId = {F9164872-3E27-4410-B4FC-038814549BB1}.105, hr = 80070490
  2016-07-26 15:13:59:978 2992 200 FATAL Manager: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  Try to upgrade manually:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

• Reinstalled Windows and can not get the video past standard vga

  I had to reformat my hard drive on my Studio 1749 and reinstall it from the disk operating system (which seems to have only the standard drivers on that).  Then, I went to the page of Support for drivers and installed the wireless lan driver and video driver.  But when I try to adjust the screen resolution, the only option for display is generic pnp monitor on standard vga adapter.  How can I get that back at the higher resolution and it supports?

  Thank you

  Dan

  First thing to do is determine whether you have an Intel or ATI video (BIOS - F2 at startup screen - will tell you).

  Make sure that you have installed the Dell system software

  www.Dell.com/.../Studio-1749

  Then install the video driver.

• How can I get the 8600 to print only black ink?

  How can I configure the HP 8600 ProPlus to print only in black ink?  I tried the option 'Enable' to black ink only under preferences / advanced, but it doesn't seem to work.  Retains color print.

  Have you set the option greyscale to black ink only?

• How can I get my computer to connect to the internet evey time that I boot it up without having to reset the network card?

  Whenever I start my computer I have to reset the network adapter or get new settings of IP so he can connect to the internet. When that I starts it connects to a LAN only.  I have cable internet. My modem works fine. I have Windows Vista and Internet Explorer 8.

  Hello

  See the following link, it worked for me. I'm sure that it will work for you as well.

  http://www.Vistax64.com/Vista-General/151727-connect-Internet-startup.html

• Sony VAIO Windows 7 can not get the most recent updates

  I have a Sony VAIO - VGN - Windows 7 and I can't seem to get 2 errors updates received up to this most recent need help in simple English please because. I am not computer savy and have spent more than 2 hours (really) trying to get windows answers continue to send from one place to the other. So far, I received 3 error 80080008-codes-50597-80070652 trying to get answers please help.

  Try the new June included in this update rollup, update client

  https://support.Microsoft.com/en-us/KB/3161647

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Don't forget to change your windows update settings to never check the updates, and then restart the computer before installing.

• Windows 7 can not get the KB971033 update to install

  CAN'T UPDATE KB971033

  Have you tried to download and install it manually? You can download it from http://www.microsoft.com/downloads.

  If its an update optional, you can hide and ignore it:

  Hide the Windows 7 updates that you don ' t Want never to install
  http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

  How to hide updates or restore the hidden in Windows Vista updates
  http://www.itechtalk.com/thread5013.html

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If it is a critical update, what you could do is to wait for Windows 7 Service Pack 1 was released on February 22, 2011, it could be included in this update.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• network not working not after you have reinstalled Windows, where can I get the drivers?

  I reinstalled windows xp professional service pack 2 on my HP and do not think that all the drivers downloaded bc I can't connect to internet or fix ip address.

  I have a hp and dell. I went back two of them to the original os. I have the discks for each of them. However, the dell has a disc to reload the drivers. All I have with the CV is the operating system, Documentation CD and CD of Diagnostics and restore hp more cd. I put restore plus CD first, then reloaded the operating system. I don't think that all drivers have been downloaded because I can not connect to internet. Any help with this?

  Please visit HP Support & software, enter your computer HP model number and click search for drivers Windows XP download.

• When changing the windows, how can I get the next window full screen?

  I double click on my ebay icon, it opens in a window that is minamised. How can I configure it to mount the best?

  Try this:

  Open it shortcut-> close all other windows internet Explorer-> drag the edges of the window to fill the entire screen-> close the window by holding the 'alt' key and clicking on the button close at the top right of the window (red with white "x" button), the next time that you open, you should remember its size when it was closed.

  I hope I could help

• I lost my product key of window how can I get the key to product again

  I bought Windows vista through the internetfrom microsoft I need to restart the system and I have lost the key ptoduct. can you help me

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista is still running and active, use the program above to find your product key.

  See you soon. Mick Murphy - Microsoft partner

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I have a compac using XP. I get "your windows installer is installed correctly" when I try to unimstall a program. That's happened? How can I get the installer working properly?

  I can't get the uninstall program to work properly in 'install/remove '.  I am told "windows install is installed incorrectly or it is in safe mode.  Another problem is that I can not transfer files on a CD.  I don't know if these issues are related.  I don't know enough to find the offending element.  Someone at - it response - I can fix it myself, or something I can download from Microsoft?
  Thank you.

  That is what the message really says or does mean something like these examples:

  When you try to install a program or by clicking on the button 'Edit' or 'Delete' in Add / Remove programs on an application already installed, you see a message like this:

  Windows Installer may be damaged or your computer is in safe mode

  or maybe this message:

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Contact your support team.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet.

  Look in the Services applet to see if the Windows Installer Service is still listed and you will find that it is probably not listed (but it should be).

  If the Windows Installer Service is listed, make sure it is not disabled and if it is disabled, change the startup type to manual.  You can't set it to automatic as it will start on its own when he needs start and you don't need it starts every time that you restart your system and execution of all the day when there is nothing to do.  The Service will start when they need start if she is able to start.  Enough-click OK to save your changes and close the Services applet, reboot your system to make sure the changes 'stick' and see how things look now.

  If the Windows Installer Service is lack of Services, you must add it as follows:

  Click Start, run, and in the box enter these commands one at a time by clicking on the OK button for each:

  msiexec /Unregister (or you can type: msiexec /unreg)
  msiexec/regserver

  Click OK after each command (there is no message about what happened)

  Check in the Services applet again to see if the Windows Installer Service is now listed, and the startup type is set to manual, reboot your system to make sure the changes 'stick' and see how things look now.

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.