1000 HP no. 11 mini laptop model: fatal system error mini computer laptop hp 1000
I need the error code fatal system please
Enter e9lof3po73 (3rd character is a lowercase L)
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP MINI 110 FATAL SYSTEM ERROR STOPPED. [redacted]. !!!
HP MINI 110 LAPTOP FATAL SYSTEM ERROR STOPPED.
[number of Series edited by Moderator]
Please someone SOLVE THIS PROBLEM. I HAV NOT OPEN MY LAP FOR 3 months...
Hello
Try to enter: e9loq3f5ne (3rd character is a lowercase L)
Kind regards
DP - K
-
C000021a error: {fatal system error} when starting laptop PC M30 series
I get the following error when starting my laptop.
"Stop: c00021a {fatal system error} the windows logon system process ended unexpectedly with status 0 x 00000080 (0x00000000 0x00000000).
The system was stopped.I have the CD of restoration at the time of purchase. I have some data I need to recover. If someone knows the resolution of this problem, please let me know the procedure.
Thanking you in advance.
-YGHello
I found an interesting page. Please check all the solutions mentioned on this page. http://www.eggheadcafe.com/NG/Microsoft.public.WindowsXP.accessibility/post652591.asp
Good luck!
-
HP mini 110 computer: password check failure fatal system error stopped CNU9384ZG7
Can someone please help. I've not turned my HP Mini computer in a few months and when I did I got this error. Password check failure fatal system error stopped CNU9384ZG7.
Please enter = e9lofuv0hx
Kind regards
K N R K
I work for HP
-
password check failure fatal system error stopped CNU902254V its a hp mini 1035nr
password check failure fatal system error stopped CNU902254V its a hp mini 1035nr. I forgot the password. can anyone help?
Try the jam.
e9lo177qv6
3rd letter tiny L.
4th letter lowercase O.
8th letter lowercase Q.
Use this code to go into the BIOS.
Disable all passwords that are enabled.
IF demand for CURRENT password using this code.
REQUEST NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Compaq Mini CQ10 CNU00872CY: password check failure fatal system error stopped CNU00872CY
have the same problem on my hp mini.
password check failure fatal system error stopped CNU00872CY
Please helpme to slove this problemPlease enter = e9l11ux7ei
Kind regards
KNRK
I work for HP
-
password check failure fatal system error stopped CNU0133TLF its a computer hp mini CQ10. I forgot the password. can anyone help?
Hello
Come in:
e9l13ffak8
-
I have a laptop Dell Inspiron 1750. Since Sept 09.
Starting from Saturday, may 8 my system won't start up
I turn it on it loads the Dell logo, loads the windows logo, and then flashes a blue screen for a split second (the blue screen flashes so quickly that it is difficult to read what he says, so I recorded it and it comes up with "STOP: c000021a {fatal system error} the verification of a knownDLL failed.") system process finished unexpectedly the status of 0xc000012f (0x0007c220 0x00000000) the system has been shut down.) and restarts after the dell logo loading again it goes to a black screen with the options to launch start up repair or start windows normally.
I have Launced the Startup Repair, after loading files and checking for problems it says then Startup Repair cannot repair this computer automatically. I made the diagnosis and he says there is no problem, I have contatced dell as it is still under warranty but they said this isn't a hardware problem, it is a software problem and infact NOT covered by the warranty and I have to pay £60 to have the support of the software. I don't have a recovery disc and tried to restore the system to an earlier stage. But no luck!
Was hoping someone here, perhaps a solution. Please please please help!
Thank you very much
ShipStatus 0xc000012f is "STATUS_INVALID_IMAGE_NOT_MZ" - "the file specified image did not have the correct format, it did have an initial MZ." (anecdote: binary windows start with MZ - the initials of Mark Zbikowski - who was a promoter of the MS-DOS product)
That, with "a knownDLL verification failed." Basically telling you that you have corrupted files on your system. Any chance you are able to boot into safe mode or safe mode with command prompt to run SFC/scannow? Can you somehow shoot out of the system event logs and check the events worthy of attention? Are you all able to run chkdsk on the drive through the command prompt in the System Recovery Options?
-
HP Mini 110: the password test failed CNU9256w50 fatal system error
I tried to turn it on after a few months of use do not, and this password thing came, but I have no idea what is the password. Please help me
password check failed CNU9256w50 fatal system error
Enter: e9lo7qgdq1 (3rd character is a lowercase L)
Kind regards
DP - K
-
STOP: c000021a {fatal system error}
on startup, I get the messsage
STOP: c000021a {fatal system error)
the session system process manager ended unexpectedly with the State Oxc000026c (OX00000000 Ox00000000) initialialization.
the system has been shut down. I can get into the Setup menu and the menu of safe mode but nothing else. I'm a little computer literat but need help.
the laptop worked well, but a little slow with a message saying not enough disk space.
When I clicked on stop, he came with updates and downtime that I said OK and she stops with no other message. in operation today and has received the above message.
Hi paulwin73,
· What is the service pack installed?
Follow the steps in the link that contains information about the cause of the error and the resolution for the same below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello, Hello...
I have an error when whenever I start my laptop and it will return to market after a few seconds after that boot then BSOD (blue screen of death) appear with msg like this...
STOP: c000021a {fatal system error} the process window system subsystem ended unexpectedly with status c0000005 (0x75e9ad15 0x0052f240). Then the BSOD stuck there and forcing me to press the reset button to restart the laptop... What is the cause that happen to my system of the laptop? Sometimes it restarts automatically when I try to install a new version of the Media Player Classic player, open a video in Media Player Classic, open the Opera web browser and some kind of emulator PSP (Playstation Portable).In addition, I noticed there is some sort of process that runs without warning when I try to monitor using Process Explorer, the process is "wscript.exe". before that my laptop is not running this kind of process, but it in courses run once I started a laptop after I installed Dev C++ application, DOSBox (emulator of game back) & Opera web browser.
How can I solve this problem?
I use
Acer TravelMate laptop computer
Intel Celeron
Microsoft Windows XP Professional SP2p/s: sorry for my bad English.
You get the error because Winlogon.exe or Csrss.exe is a failure. The cause could be installed incompatible system files, program service pack installation has failed, the backup did not work right, or an incompatible third-party program has been installed. From the sounds of it, you'll first want to take a look at the programs that run at startup, as is usually the last of those above problems that caused the problem.
Here are some sources: http://support.microsoft.com/kb/156669 and http://www.computing.net/answers/security/stop-c000021a-fatal-system-error/20937.htmlI hope this helps! -
STOP: c000021a {fatal system error} during shutdown
I have Windows XP SP3 running on an old laptop Asus L2000 who remains perfectly functional.
Whenever I stopped him, this BSOD stop: c000021a {fatal system error} and something on the logon process terminated unexpectedly pop and the laptop just stays on like that until I hit the button to power only, then it will turn off. In the contrary case, the laptop runs normally.I looked everywhere but nothing is done, nobody gives never a direct response to how which and where to fix the problem.This problem started after a process of full consolidation (anti-virus, registry and the batch recovery) after an escape of the virus. Now the system is clean.Is there a particular way or procedure to get rid of this problem?Hi aaavvv,
This error can occur when you have GoBack installed on your computer and it is present in the boot sector.
GoBack causes a Stop C000021a error
http://support.Microsoft.com/kb/316503
Also see the article below and check if it helps.
How to solve an error "STOP 0xC000021A.
-
Stop 0xc000021a (fatal system error) at startup
Original title: c000021a fatal system error - help please!
My son has bad closed my laptop just by holding down the power button without closing the first and next time I tried to use it, he began to start as she normally does, but instead of going to the login screen after screen of 'Windows', a blue screen came that said: "STOP: c000021a {fatal system error} the windows connection ended unexpectedly with status 0xc0000005 system process (0x00000000 0x00000000).» The system has been shut down. I tried to start it in safe mode, and it just goes back to the same screen. I have a Dell Latitude 110 L with windows xp and service pack 3. No norton. Can I do to solve this problem?
Three things come to mind.
Your file system got corrupted (usually not too big of a deal of difficulty) and XP can not simply to find the necessary files. Which can sometimes occur if you use the power button.
Certain older versions of Norton will sometimes cause this problem of corruption after the reception and therefore updated my application (stupid Norton).
Your winlogon.exe or explorer.exe has been quarantined (actually deleted) by your AV software
You must first start on your CD in the XP Recovery Console and check the integrity of your file system using the command chkdsk /r program.
If the chkdsk /r did not do so, we use the Recovery Console XP replaces your winlogon.exe and explorer.exe.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
Put your XP CD in and start on it and keep reading below.
If you are not sure what kind of CD you or "looks" right, we can make a bootable CD of XP (media without required P) Recovery Console.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the command prompt.
Start by checking the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find. It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.
I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.What about OttoWindows vista Home basicHello
Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.
Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/=========
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problemRun the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">-->
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
password check failure fatal system error stopped CNU0082QZ6
Compaq mini cq10-120SD
password check failure fatal system error stopped CNU0082QZ6
need help pls...
Hello
Try to enter: e9l11u750g (3rd character is a tiny and 9th sucks)
Kind regards
DP - K
Maybe you are looking for
-
Camera problem, search bar facebook app
Hello world I use iphone 6s, having 64 GB since I got this new iphone I m facking a lot of trouble I have a few questions about above mentioned propblem. 1. whenever I open the camera, THE CAMERA STUCK for a MOMENT before showing me the view that I w
-
Portege Z830 - X 11 - enter key does not work on the logon screen
suddenly, the Enter key does not work in the scrreen of connection (win 7 64 bit, toshiba portege Z830 - X 11), which some do not login with password. The on-screen keyboard sends the "enter" or the other.When in safe mode, everything works as it sho
-
After that connection imac freezes with just spinning wheel - Yosemite
Hi all Kindly help if someone were faced with the same problem and solved. I did all the steps (LANDAU, NVPRAM, MODE without FAILURE, check / repair disk), but nothing has worked.
-
I have a Pavilion all in one smart touch 23 model # 23 - widowed 1217c 8.0 (initially) when I did restore disks, there was a power failure and disk 4 #3 not is and the system wouldn't let me not go back. He continued with disc 4. Now the computer bro
-
Attempt: sfc/scannow Message - "windows resource protection could not start the repair service." Help - what I try next? Already tried 'restoration' - options limited only 5 days without success. No access to internet, even when the network says conn