101202 BPEL process (Oracle AS) of the migration to SOA Suite 11 g (WLS)

Similar Questions

• Approval process of the user using SOA suite

  
  Hello world

  I work in JDev 11.1.1.7 and I need to create a new workflow process work for the registration of the user in SOA suite without BPM. can achieve us with SOA alone?

  Examples please...

  Thank you.

  Take a look at the following interesting article

  http://Redstack.WordPress.com/2011/01/15/what-BPM-adds-to-SOA-suite/

  Antonis

• BPEL process stopped polling after the displaced Table

  Hello
  
  Oracle 10.1.2
  SOA Suite 10.1.3.4
  
  We have a process BPEL has been deployed and working for a while. This process is defined to query a table in every 5 seconds and set the State on BPEL_POLLED once found. It was working fine until I dropped and re - recreates the table that was questioned. (No changes have been made to the structure of the table - I was mearly testing a build script).
  
  This table was recreated, the BPEL process stopped polling. I have re-deployed service, stopped and started the server and it is not the voting table.
  
  May I take it that drop and recreate the table being queried have an impact on the electoral process and I looked through the forums, but I don't really know what I'm looking for?
  
  I'm not a developer, BPEL, however I was left the task of working through this, any help would be appreciated.
  
  Concerning
  
  JB

  Hi James,
  This is an expected default behavior (in 10.1.3.4 MLR #7 from at least). The State of the process is set to 'stop' if the vote fails with a SQL error. If you look at the log file, after you turn on debugging, you'd be able to see an explicit message that indicates that the process is currently disabled.

  If you simply change the status of the process to 'On' even once, it would begin returning.
  Or to be on the safer side, if you want to change the structure etc. of the voting table, its best to withdraw from the process, modify the table and then activate the process.

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles

• BPEL process not shown in the tab "proceedings."

  I have a BPEL process that calls a stored procedure to check if the process is not a duplicate, and then writes the data to the database.
  The stored procedure writes the instance id in an intermediate table and gives a ret code '0' for the process to go ahead and write data in the database.
  The problem is that I see a folder with the instance id in the intermediate table, but the instance does not appear in the tab of BPEL instances on the server.
  
  (This is not writing data in the DB as well.)
  (I checked that the stored procedure returns the ret code '0', so, technically, the process is to do what is necessary)
  
  Treat any ideas on how to display this lack or why he is missing from the server?

  It seems that your process have been spent on the manual recovery. So somewhere along the line the process failed. Take a look in the logs to see if there are errors.

  To see the instances there is a link called manual recovery tab BPEL process. If you do not see it check the reminder and the tabs of the activity in view of the manual recovery.

  Once you fix the error this process know you can restart. As long as the fix was not not to redeploy.

  see you soon
  James

• Migration to Soa Suite 10g and 11g!

  Hi all
  
  How to migrate already developed a BPEL and ESB process in the oracle SOA Suite 10 to 11 g version.?
  All Documents or s demo available?
  
  any suggestions?
  
  Thank you
  knockaert

  http://download.Oracle.com/docs/CD/E12839_01/upgrade.1111/e10127/upgrade_soa_apps.htm#FUPSS1384

• Error so that the Installation of SOA SUITE 11g

  Hello
  
  I install SOA SUITE 11g on Oracle Linux 4.
  I have already installed the Oracle 11 g database
  I installed the Weblogic 10.3 Server
  
  I checked the oracle database, I am able to run it successfully.
  I checked weblogic server as well, its too running successfully.
  
  I opened a server session as * 'oracle' user * and trying to launch runInstaller from command prompt
  
  
  the trace of error is produced is lower. Please let me know where I am doing mistake.
  I'm new to SOA SUITE n related technologies...
  
  
  [++[Oracle@localhost ~] $ cd SOA_SUITE / Disk1 ++
  ++[Oracle@localhost Disk1] $ ls ++
  ++ doc install setup.exe stage runInstaller ++
  ++[Oracle@localhost Disk1] $. / runInstaller ++
  ++ From Oracle Universal Installer... ++
  
  ++ Checking if CPU speed is above 300 MHz. 1992 actual MHz Passed ++
  ++ Verification space Temp: must be greater than 150 MB. MB real 233511 spent ++
  ++ Checking swap space: must be greater than 500 MB. Real 5023 MB spent ++
  ++ Control monitor: must be configured to display at least 256 colors ++
  ++ > > > Could not execute auto check for display colors using command/usr/X11R6/bin/xdpyinfo(1). Check if the DISPLAY variable is set. Failure of < < < < ++
  
  ++ Some requirement checks failed. You must meet these conditions before ++
  
  ++ installation, ++
  
  ++ Continue? (y/n) [n] y ++
  
  
  ++ > > > Ignoring required prior failures. Continuing... ++
  ++ Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-02-23_05-49-23 PM. Please wait... ++
  ++ Please specify JRE/JDK (Ex./home/jre), < location > location/bin/java must exist: ++
  
  ++ Please specify a valid JRE/JDK location: /root/Oracle/Middleware/jdk160_14_R27.6.5-32++
  
  ++ Please specify a valid JRE/JDK location: ++
  
  
  I'm giving the JRE/JDK location that I had when I was installing weblogic server, but its not to accept that, and I'm
  "Please specify a valid JRE/JDK location:"message again. "
  
  
  Please let me know how I can I get out of this error.
  
  Thank you
  
  Vishnu kumar

  Hello
  check for spaces or a character that could happen even if you specify the location of the JRE, you can also call runInstaller with
  i.e; have - jreLoc, the path in the cmd.

  . / runInstaller - jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32

  that should work.

  Kind regards
  Jitendra

• How to remove the message from the subject of the SIDES in SOA Suite 11.1.1.7

  Hello guys,.

  For waiting message of the subject of SIDES, I configured the foreign server in weblogic server.

  Here are the steps I followed to set up foreign server:

  Configuring WebLogic Data Source-RIBAQJMS_DS - JNDI name: jdbc/RIBAQJMS_DS

  For the connection SOA_Cluster-Pool-> Driver class Name:oracle.jdbc.xa.client.OracleXADataSource

  WLS_JDBC_REMOTE_ENABLED value = "-Dweblogic.jdbc.remoteEnabled = true in the setDomainEnv.sh bounced the server."

  JMS Module: (Services-> messages-> JMS Modules) - Oracle: Configure a JMS - name system Module: AIAJMS_MODULE

  2. objectives: SOA_Cluster

  A foreign server: (Services-> messages-> JMS Modules-> AIAJMS_MODULE

  Oracle: Configure a foreign JMS server

  -> General configuration - JNDI Initial context factory: oracle.jms.AQjmsInitialContextFactory - JNDI properties: datasource = jdbc/RIBAQJMS_DS Configuration-> Destinations-name: RIBAQ - Local JNDI name: jms/RIBAQ

  Remote JNDI name: topics/ETLOCATIONSFROMRIB

  Configuration-> connection factories - name: ForeignTopicCF - Local JNDI Name: aqjms/XATopicConnectionFactory - remote JNDI name: XATopicConnectionFactory

  JMS adapter (deployments-> adapter JMS-> Configuration-> outbound connections Pools) - pool name: eis/AQJMS/RIBTopic

  Properties-> location of standard connection: aqjms/XATopicConnectionFactory

  Topic: true
  

  In JDeveloper used JMS JMS adapter provider chosen Oracle Advanced Queuing,

  Select the queue from the drop-down list: jms/RIBAQ and the connection in common such as: eis/AQJMS/RIBTopic

  After you deploy the composite in the SOA server log there is no error message, to study further I put the oraacle.soa.adapter logging level to finest (32).

  However I can not see the relevant error messages in the log files.

  Can someone please provide any idea, is it need any additional installation in fact?

  Thank you

  B

  I solved the problem by myself, the making of connections which I was referring was equated. This is why the messages were not sent.

  I would be able to base problems by creating a similar scenario of test cases.

  See you soon,.

  B

• What should be the address of the cluster in soa suite 11 g

  What should be the address of cluster if I managed server1 on a box and managed server 2 on the other urgent box.please let me know

  IF you have 2 servers managed on two boxes

  the cluster address would be

  hostnameoffirstmanagedserver:portofms1, hostnameoffsecondmanagedserver:portofms2

  It would work

• The security token cannot be authenticated to exposed SOAP BPEL process

  Hi all

  I have a BPEL process that I'm outlining like SOAP web service that conducting a policy of oracle/wss_username_token_over_ssl_service_policy . The BPEL process does nothing with the identifying information that is passed (in fact, I stripped everything out of him so that there is no anything). When I test the web service using soapUI I get the following error message: FailedAuthentication: the security token cannot be authenticated. Anyone have any ideas why?

  This is the payload sent to the service:

  " < = xmlns:bpel soapenv:Envelope ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess "xmlns:soapenv =" http://schemas.xmlsoap.org/soap/envelope/ ">

  < soapenv:Header >

  " < xmlns:wsse wsse: Security = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "xmlns:wsu =" " http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd "soapenv:mustUnderstand ="1"> "

  < wsu:Timestamp WSU: ID = "TS - 10" >

  < wsu: created > 2013 - 10 - 07T 21: 16:16Z < / wsu: created >

  < wsu: expires > 2013 - 10 - 07T 21: 16:48Z < / wsu: expires >

  < / wsu:Timestamp >

  < wsse: UsernameToken WSU: ID = "UsernameToken-9" >

  WJR < wsse:Username > < / wsse:Username >

  " < wsse:Password Type = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText "> CBA < / wsse:Password > .

  " < wsse:Nonce EncodingType =" http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> 2460zn8mTqCxdB6XS65Ixg == < / wsse:Nonce > .

  < wsu: created > 2013 - 10 - 07T 21: 16:16.577Z < / wsu: created >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  < bpel:process >

  " < = xmlns:bpel bpel:input ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess ">? < / bpel:input >

  < / bpel:process >

  < / soapenv:Body >

  < / soapenv:Envelope >

  Hi Bill,

  The message is pretty clear "FailedAuthentication: the security token cannot be authenticated. There should be something wrong with your security configuration... The fact that your code doesn't do anything with the credentials doesn't mean anything, as long as you have politics, you must pass a valid authentication...

  See you soon,.

  Vlad

• How to use the loop in BPEL process

  Hi friends
  
  I did a bpel process that picks up the XMl file using the File adapter and imports the data from the XMl file into db oracle table using the DB adapter...
  
  But here the XML in the file that have only one line... If I want to insert the XML code in the file that have two or more lines I want to use a loop in my process BPEL how to use loop in my bpel process?
  
  In my BPEL process, that I have que j' ai utilise used receive, process and call activity where I can use in my BPEL process
  
  Thanks in advance
  
  AT

  Here is a basic example of while activity in BPEL

  http://blogs.Oracle.com/ajaysharma/

  Thank you
  AJ

• Queryu for the bpel process manager

  Hi, what is the difference between the avilable process manager bpel in SOA and bpel process manager available separately? Equals console bpel and bpel process manager?

  So in short, there is nothing different in the stand-alone version and the version that are delivered in SOA Suite.

  The release of SOA Suite comes from the beams with all other products.

  see you soon
  James

• 1 WSDL include multi BPEL processes?

  Hello

  I use Jdev 12.1.3, I create multi BPEL processes and deploy on the server, the problem is that each BPEL process have different WSDL link, it means that if I have 10 BPEL process, then I have 10 different WSDL link, how can I get 1 WSDL include multi method (process BEPL)

  Thank you

  Hi Hani,

  You can create a WSDL with several operations. Then, you can use the pick activity to respond on different operations. Replace the first reception in the with a pickaxe and be sure to check the box 'create a forum '. See http://blog.darwin-it.nl/2009/12/multi-operations-bpel.html. (I think this example is BPEL 1.1, but it works for BPEL 2.0 accordingly).

  For the re-use of wsdl in several SOA Suite components, store an abstract version of the wsdl file in the MDS and reference it by using the "oramds://apps/...". "URL in the Compsite.xml see, for example Oracle SOA / Java blog: SOA Suite PS6 (11.1.1.7); Loose coupling and chips of service.

  Kind regards
  Martian

• Sync and async bpel process

  Hello
  
  I was reading about the process of synchronous and asynchronous in the forum, I also have a similar problem.
  
  some of my questions are:
  
  If suppose my BPEL process will take approximately 2 minutes or more to complete, so I can't not chosen synchronous BPEL process as the default period is 45 sec and do not recommend to increase the time.
  
  As the above is true, that I created an asynchronous BPEL process, now, I want the asynchronous response, is that this is possible? even I found that when I invoke the asynchronous process BPEL partner links it does not ask for the output variable. SO if all process will take more time and answer to that need, what is the solution.
  
  Kind regards
  Abdou

  You must use a receipt to get the response from the asynchronous process.

  That's why you need a call and a reception.

  Create a receive activity, and then drag the connection to your link partner. You will see that only the exploitation of the response is there.

  see you soon
  James

• Problem call for different versions of BPEL process leave an ESB

  We are currenlty have a problem calling a service of BSE BPEL process.
  
  We initially developed the solution and the two releases correctly, however, it was necessary to make some changes to the BPEL process and we have redeployed later the BPEL process incrementing the version number.
  
  However, the BSE service when insider trading was still called the initial version of the ESB service.
  
  Is it possible to do BSE call the default version of BPEL process as configured in the BPEL console.

  You can accomplish this task by calling the SOAP Service in BSE that points to the current WSDL of BPEL process, for example:
  http://localhost: 8888/orabpel/default/SOAOrderBooking/SOAOrderBooking? WSDL
  Instead of
  http://localhost:8888/ORABPEL/default/SOAOrderBooking/1.0/SOAOrderBooking?WSDL

  This information is available in Metalink Note: 430206.1

• Integration of BPEL Process Manager and jDeveloper

  I downloaded BPEL Process Manager 10.1.3.1.0 but BPEL Designer is delivered is no longer with her and it integrates with jDeveloper 11g. Is there a version of BPEL Process Manager that I can integrate with jDeveloper Studio Edition Version 11.1.1.0.0? I have to use jDev 10g in order to use BPEL Process Manager. Please forward your comments.

  The JDeveloper and SOA Suite / BPEL version must remain in phase with each other, this includes minor versions, e.g. JDev 10.1.3.4 must be used with SOA Suite 10.1.3.4. Unfortunately the 11g JDev is not certified with the 10.1.3.1 SOA Suite.

  If you just install SOA Suite, it may be a good idea to upgrade to 10.1.3.4 until development is underway.

  see you soon
  James