Queryu for the bpel process manager

Similar Questions

• BPEL Process Manager 10.1.3.3 on WLS 10

  Hello
  
  I just wanted to know if BPEL Process Manager 10.1.3.3 is compatible with WLS 10.
  I found the link for BPEL Process Manager 10.1.3.3 with WLS 9.2 below.
  
  http://download.Oracle.com/docs/CD/E10291_01/ doc.1013 /e10538/WebLogic.htm
  
  
  I just wanted to know if the installation procedure for the BPEL Process Manager 10.1.3.3 installation with 10 WLS is different and if so
  So where can I find the installation procedure.
  
  Concerning
  Harish

  It is not certified, you need to install on 9.2.

  I think that it will be delivered in 10.1.3.5 which should be out before June 1.

  see you soon
  James

• In the bpel process one-way transaction management

  Hello
  
  I created a one-way bpel process with oneWayDeliveryPolicy property - property Sync and transaction - required. When I exposed this service as a SOAP service, I see well The Participation of Transaction in the Web Service adapter in the way of exposed Services configured as EVER. Is this to say that BPELCallee would not participate in the same transaction as the appellant BPEL?
  
  Aditya

  Hello

  Properties refer to the support of different transactions "contexts", as you can see in the documents below. The bpel.config.transaction refers to the semantics of Transaction BPEL Process Manager, while the 'Participation of the operation' refers to WS-AT , which provides interoperability of transaction between Oracle WebLogic Server and transaction of other providers services... I've never tested it myself, but I guess that if you process BPEL transactions, the bpel.config.transaction will prevail...

  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/soa_transactions.htm#CHDEHCFE
  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/sca_bindingcomps.htm#SOASE86071

  See you soon,.
  Vlad

• Stop and start the bpel process in 10g

  Hello
  
  How can I stop and start a process bpel to automatically set time (say to Saturday 9 pm et we shud stop the bpel process and Sunday 9 HE we shud it again). Pls let me know.
  
  ADI

  Oh... I'm sorry. I have been misunderstood.

  I never did, but you can try with the java code (whether in another bpel process or just another application):

  API to disable the process BPEL (State = stop) in Oracle soa suite 10 g

  Tell me if it works for you.

  Arik

• The EMP process Manager service cannot be started

  Hi I have installed EMP, planning and essbase, now when I try to start the EMP process Manager service it is said that the service has started and has stopped because some services stop if they have nothing to do.
  the services that are running on my system considering essbase space work and shared services.
  I'm relatively new to EMP and I'm just starting to use it, including at - it a particular order to start the services of EMP
  Help, please
  Thanks in advance

  The RDBMS user doesn't have sufficient rights.

  Connect as SYS (DBA) and run this script and then re-create the tables (database configuration) using config utility:

  CREATE THE USER EPMREP
  IDENTIFIED BY EPMREP
  DEFAULT TABLESPACE USERS
  TEMPORARY TEMP TABLESPACE
  DEFAULT PROFILE
  RELEASE OF ACCOUNT;
  -1 role for EPMREP
  GRANT CONNECT TO EPMREP;
  ALTER USER EPMREP ROLE DEFAULT ALL;
  -12 system to EPMREP privileges
  GRANT CREATE SYNONYM OF EPMREP;
  GRANT ALTER SESSION TO EPMREP.
  GRANT CREATE VIEW TO EPMREP;
  GRANT CREATE SESSION EPMREP;
  GRANT CREATE SEQUENCE TO EPMREP;
  GRANT CREATE PROCEDURE EPMREP;
  GRANT ALTER USER TO EPMREP;
  GRANT CREATE TRIGGER TO EPMREP;
  GRANT CREATE TABLE EPMREP;
  GRANT SELECT ANY DICTIONARY OF EPMREP;
  GRANT CREATE TYPE EPMREP;
  GRANT ALTER SYSTEM FOR EPMREP;
  -should be removed after Installation of the EMP
  -REVOKE ALTER SYSTEM FOR EPMREP;
  -1 contingent of Tablespace to EPMREP
  ALTER USER EPMREP QUOTA UNLIMITED ON USERS;

  HTH-
  Jasmine.

• Cannot find new_domain in BPEL Process Manager

  Hi friends,
  
  I've updated the patch from oracle soa suite 10.1.3.1 to 10.1.3.4... I followed the procedure, I ran the scripts, installation was successful. but when I opened my bpel process manager I can not find any change in the GUI is not different... I've seen screenshots of 10.1.3.4 bpel: they are different and it has an option to the drop in default menu items and new_domain but I can not find them...
  
  is someone can you please tell me what I should do in order to get the ability to create new_domain...
  
  It would be very grateful...
  
  Thank you
  Bargo

  Your friend is on an older version. By default the drop does not exist, I'm not sure if the drop down menu appears when several areas exist? Otherwise, you go to your domain name by using the following url

  http://hostname:port/BPELConsole/[domain]/index.jsp

  To create a new domain

  Goto website

  http://hostname/ReportServer: port/BPELAdmin

  see you soon
  James

• Integration of BPEL Process Manager and jDeveloper

  I downloaded BPEL Process Manager 10.1.3.1.0 but BPEL Designer is delivered is no longer with her and it integrates with jDeveloper 11g. Is there a version of BPEL Process Manager that I can integrate with jDeveloper Studio Edition Version 11.1.1.0.0? I have to use jDev 10g in order to use BPEL Process Manager. Please forward your comments.

  The JDeveloper and SOA Suite / BPEL version must remain in phase with each other, this includes minor versions, e.g. JDev 10.1.3.4 must be used with SOA Suite 10.1.3.4. Unfortunately the 11g JDev is not certified with the 10.1.3.1 SOA Suite.

  If you just install SOA Suite, it may be a good idea to upgrade to 10.1.3.4 until development is underway.

  see you soon
  James

• save an image in an image file and reloaded on another computer for the image processing

  Hello

  Can I save the image to an image file and then reload the file on another computer for the image processing? What type of image format should I save for it? Is there any loss of image if I do this? The machine with the camera sits in our lab, and I want to test the software on my own computer image processing. So can someone give some good ideas on this. Thank you

  Jane

  I assume you have the module development VDM and vision acquisition software going TO on your computer.

  So just use playback IMAQ and IMAQ save functions. BMP, png are good for losless save unlike jpg and jpeg2000.

  Hope this helps

• Failed to initialize for the logon process

  My phone displays the following message when I turn it on (the screen is black, but this message shows): failed to initialize for the logon process
  The interactive logon process initialization has failed.
  For more details, please see the event log.

  Clicking OK doesn't do nothing, the message just keeps reappearing.  I tried stopping and starting Windows up in Mode without failure.  The message appears in Safe Mode, as well.

  Hello berniesun,

  You can give the Startup Repair to try to clear this error. I've included the steps located in the help section on all versions of Windows Vista. If you want to print these instructions for yourself, you can go to help & Support in the Start Menu and type the Startup Repair in the top search box.

  Check back with us and let us know if this solves your problem.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

     Note

     • If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How you add cash for the new Portfolio Manager?

  How can you add cash for the new Portfolio Manager. It is not MSN Money application is simply Money Portfolio Manager.

  Hi Thirualluvar,

  Who is the manufacturer of the application of Portfolio Manager?

  Microsoft, the Portfolio Manager application is Microsoft Money 2008. If you use the same, you can contact Microsoft Money technical support for assistance.
  http://support.Microsoft.com/ph/870/en-us#TAB4

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• Issue of permanent withdrawal for the background process

  Dear all,

  Oracle DB Version: 11.2.0.3

  Version of the OS: RHEL 5.10

  We have the below listed (with the exception of the mandatory process) background process when querying using the command "ps" on the DB server:

  ora_e006_SID
  ora_w001_SID
  ora_smco_SID
  ora_e007_SID
  ora_e008_SID
  ora_j000_SID
  ora_j001_SID
  ora_qmnc_SID
  ora_cjq0_SID
  ora_emnc_SID
  ora_q000_SID
  ora_q001_SID
  ora_e000_SID
  ora_e001_SID
  ora_e002_SID
  ora_e003_SID
  ora_e004_SID
  ora_e005_SID
  

  Whenever we're tyring to stop the database, he's waiting for active sessions. I predict the cause are treated the foregoing that delay the restart. I also predict that these background processes are releated to Oracle Streams. Can someone help me remove all background processes above? Can I permanently a solution? I've traveled to several sites but could not find the exact solution I'm looking for.

  SQL> show parameter aq
  
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  aq_tm_processes                      integer     1
  
  

  Above is the setting for the QA process.  Thanks in advance for the help.

  Kind regards

  Imran Khan

  This is resolved. It was a bug in 11.2.0.3. Raise SR Oracle and got the one-time patch. Applied and since then, it is not question at all.

  Thank you

  Imran Khan

• Providing the address of the variable response to the Notification Service to the BPEL process

  Hi all

  I use the Notification Service in my BPEL process to send e-mails. The sender of the email (or reply address) is variable and is passed in the BPEL process. I can't get the email to be sent to the reply address that is passed in. I tried to assign both ReplyToAddress and FromAccountName, but the only address that is used is one that has been set up as the account (as described in the present document Oracle 11 g Release 1 (11.1.1.6.1) and the configuration of the Human Workflow Services components - Motors). I tried the following, but to no avail:

  <assign name="AssignEmailParams">
       <copy>
            <from>'Default'</from>
            <to>$sendEmailRequest.EmailPayload/ns1:FromAccountName</to>
        </copy>
         <copy>
             <from>$inputVariable.payload/client:from</from>
             <to>$sendEmailRequest.EmailPayload/ns1:ReplyToAddress</to>
          </copy>
           ...
  </assign>
  

  <assign name="AssignEmailParams">
       <copy>
            <from>$inputVariable.payload/client:from</from>
            <to>$sendEmailRequest.EmailPayload/ns1:FromAccountName</to>
        </copy>
           ...
  </assign>
  

  Am I missing something? Any help would be greatly appreciated.

  I use JDeveloper 11.1.1.7.

  Thank you

  Bill

  Hi Bill,

  I know the sender and answering addresses can be configured on the properties of Human Workflow notification (check link below)... But I don't know if a sender/dynamic response is supported, you may use the e-mail rather than the notification one activity...

  http://docs.Oracle.com/CD/E28280_01/admin.1111/e10226/hwf_config.htm#BHCJDGFJ

  See you soon,.

  Vlad

• I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

  I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

  Hi Ashish,

  Please follow the solution 2 in the link below.

  Error: "unable to install". Creative cloud office

  After that, you can install the application by following the instructions on the link below.

  Download and install Adobe Creative Cloud apps

  Hope this will solve your problem.

  Kind regards

  Hervé Khare