1073807343 error occurred at niFgen Initialize.vi
I have questions to the question above.
I have a SMU Chasis. I swapped the controller to a new brand. (Same model - 8133 SMU). Just the controller has been exchanged and nothing else.
I wanted to put in place a new and use only the Runtime of LV and the exe file created with LV PERIOD 2009.
On the new controller, I get this error when I run my application.
Everything works fine on the former, but the former we have the system full development LV is installed on
The new controller I get error on:
It has preinstalled LV DURATION so I have not installed it.
First, I installed the drivers from the disk of DS2 2010 device drivers OR devices. But I got the error when I tried to run the application.
I uninstalled the drivers and the insalled former 2010 DS1 (I thought that it might help because these are drivers for LV 2009 SP1, that was used to create the exe file)
I have the same problem, however.
The works of exe file it has been tested on many devices but they all had the system of complete development installed on them.
Any tips?
I just wanted to post on this topic.
I had the problem solved, thanks to a person OR support.
He was bound with one of my cards OR I moved.
For some reason any on the NEW controller in the MAX I could get 2 instances of the card.
An asset, a not active.
I plugged the old joystick and exported its MAX configuration in a file.
I plugged back the new controller and opened MAX:
(1) I deleted (deleted) the map OR inactive in the list of MAX
(2) I imported the permeable contoller configuration form.
He started working.
Tags: NI Software
Similar Questions
-
An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
Hello Stephen,
try to run the "Startup Repair" utility located on your installation DVD.
hope this helps
Eddie B. -
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
You have posted in forum Windows XP hardware and drivers. You should have posted in forum Windows 7, probably the forumprograms .
If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?
Your question is also confusing: you get this error message every time that you do a reboot?
You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.
-
Original title: Error 502
How to fix "an internal error occurred in the initialization stage. The application cannot be loaded, please, seller contact application, Error 502 "after installing Yahoo Messenger
Hello
1. Once you get this error?
2 are connected to any computer in the domain?
3. have you made changes on the computer before this problem?
I suggest you try to uninstall and reinstall Yahoo Messenger and check if it helps.
Uninstall a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program
If uninstalling and reinstalling Yahoo Messenger did not help, then it would be better to post the same question in community Yahoo for assistance.
Community of Yahoo: http://help.yahoo.com/l/us/yahoo/helpcentral/community_index.html
Hope the information is useful.
-
1074118653 error occurred at niRFSA Initialize.vi
I am currently using NI PXI-1045 to test the unit under test RF signal. I use an exact copy of an example used to NOR-DAMA. The unit under test is connected to the input of the Ni PXI-5600, which is wired with the Ni PXI-5142 create NOR-PXI-5661. When I start my vi, I received the following message "error 1074118653 occurred at niRFSA Initialize.vi.
Possible reasons:
The specified device is not supported by this driver.
"Status code:-223543"
Please help?
Kind regards
Jean-Richard
OK, then open measurement and automation explore (MAX). Looks like you need to associate the buck converter of frequencies of the digitizer. On the left side of MAX, expand devices and interfaces, and then expand the tree to the chassis. Right-click on the device of 5600 (8 slots) and select Properties, and associate it with your digitizer.
-
1073807343 error occurred during the opening of Visa
I have a vi that:
-Locate the USB port that RS485 communication device is connected
-sends a command to each sensor
-reads a response from each sensor
-performs a calculation on the answer
-saves the response to a file of measure
I used a flat sequence to query each sensor. When the vi is started, it throws error 1073807343 indicating "insufficient location information or the device or resource is not present in the system." When I cancel the error, the vi works well with no other errors. This error started to appear when I upgraded to LabView2015. I also use the LabView Base development on a computer laptop Dell D630, WinXP SP3 version.
I'm taking a guess here, but I think that the error is in the opening a new piece of reference Visa of the code block.
Does anyone know why this error is thrown, or how to fix my vi?
-
When starting, I get this message. Can someone give me a solution for this?
Thank you JD
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353
NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.
It will be useful.
-
Initially, this error message appears on my desk, while booting. I found a registry cleaner that was removed, but later discovered that he is always there when I try to open Windows Live Messenger. Can you please help?
Hello
· Did you make any changes before the show?
Method 1:
I suggest that you put the computer in a clean boot and check if that helps:
http://support.Microsoft.com/kb/929135
Note: Place the computer to a normal startup by following step 7 the link above, once you have completed troubleshooting.
Method 2:
You can also uninstall and reinstall Windows Live Messenger from the link below and check if the problem persists:
-
When I start my PC, I always get this message. With that, a small figure of red monkey appears.
I have a Medion computer, 64-bit windows 7
I recently installed AVG Antivirus (FREE) and Comodo Firewall.
Can someone please help me solve this problem. In addition to the computer works fine.
Thanks in advance for your answer.
Use the clean boot procedure to determine which startup program is causeing the question
-
Error occurred during initialization of MAPI
I'm trying to move my messages OE 6 from one PC to another. When I click on file / export / Messages, I get the following message: "export could not be performed. An error occurred during initialization of MAPI. "How can I solve this problem or move my messages and folders to another PC?
Thank you
John (jbacinti)
HelloYou can check this link: -
The export could not be performed. An error occurred during initialization of MAPI
I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.
I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".
I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.
- How can I go on the export of messages?
- Can I copy the .dbx files and import them into Windows 7?
- Is there an alternative?
Outlook is not installed on my PC I want to install it either.
Concerning
Mario
The export is only if you have installed Exchange or Outlook. Copy the entire repertoire of dbx files to the Win7 computer desktop and make sure that the files are not read-only. Then, in WLM use file | Import | Messages and point to this directory.Stevewrote in message News: * e-mail address is removed from the privacy *... I need to import e-mail messages and settings of Outlook Express 6 on Windows XP SP2 to Windows Live Mail on a new Windows 7 PC.
I try to export messages from Outlook Express, but I get a message saying that "the export cannot be performed. An error occurred during initialization of MAPI".
I changed the Outook Express settings as described in section http://support.microsoft.com/kb/179637/en-us (method 2), but the message remains and I can't continue.
- How can I go on the export of messages?
- Can I copy the .dbx files and import them into Windows 7?
- Is there an alternative?
Outlook is not installed on my PC I want to install it either.
Concerning
Mario
-
Hello
Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?
Hi ErikLee,
Do you have MS Outlook installed on your computer?
Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.Follow the instructions below and check if the problem is resolved.
1. reboot your computer, and then start Windows Mail.
2. on the Tools menu, click Options.
3. in the connection tab, click on edit to open the Internet Properties dialog box.
4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
5. click OK again to close the Options dialog box.
6. exit Windows mail and restart Windows mail.If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.
To download Windows Live Mail, visit the following Microsoft Web site:
http://get.live.com/wlmail/overviewFor more information about Windows Live Mail, see the Microsoft Web site at the following address:
http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspxCheck whether the problem is resolved.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Original title: Bluetooth connection problem
I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?
Hi Trainfan1,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Run the tool and troubleshooting hardware devices.
Method 2: Check the drivers and the Bluetooth Support service.
(a) click Start, type services in start search box and press enter.
(b) Services for window open find Bluetooth Support Service and double-click it.
(c) ensure that the service is both the value Automatic for Startup type and started for the State.
(d) click Start, type Device Manager in the start search box and press enter.
(e) to search for the Bluetooth device expand it and double click on the driver.
(f) go to the tab driver and click set to update driver to update the drivers.
(g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .
Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.
Install all necessary software required for Bluetooth device work properly.
-
Buy HP Pavilion with Windows 7 64 bit. Migrate some applications and files of old laptop computer with Vista 32-bit. Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work. What is a real problem or just a nuisance, I can't ignore?
original title: Error Code 0 x 80070002Hello
I suggest to start the computer in safe mode and check if the problem persists.
Start your computer in safe mode:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If the problem does not occur in safe mode, and then perform a clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Perform step 7 to put the computer to a normal startup.
-
Hi my community developers estimated!
I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.
However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:
QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.
Thank you very much!
Please see from the log of the errors below:
Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain2014 BuildDefaultDomain2.py - 07-04 18:00:03
cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
Process began
WLST > error occurred during initialization of VM
WLST > could not reserve enough space for lots of things
WLST > error: could not create the Virtual Machine Java.
WLST > error: a fatal error has occurred. Program ends.
Elapsed time: 437 msThanks James, I changed the memory allocation in the WLST script and I no longer get the VM error
Maybe you are looking for
-
Mini Mac server - attachment of external hard drives file transfer speed
Hi guys! I wanted to increase the speed and storage capacity to transfer to my Mac mini file, so I bought a box of external hard drives. The one I bought is: http://www.icydock.com/goods.php?id=219 Built-in the Mac mini hard drives transfer the file
-
Another request of Photos.
If you want pictures/videos you take with your iPad to be saved to one different location other than the native photo app on the iPad like Dropbox or Google Drive How do you (if this is possible)? Basically, I would like all the Photos and videos th
-
I update its version, uninstall & re-installed. Separately downloaded the new version and install after uninstalling old firefox, but I don't have a solution.
-
Satellite M70 - 350 - recovery disk stopped with black screen
Hello I tried my laptop with the original recovery CD or DVD recovery. He just stopped with the black screen and the error message. After that, I tried the advanced recovery mode. By selecting the ghost Image, which gave me the Image corrupt error. W
-
How to cut the HP logo light rear
Hello I use a dm4-1009tu paviliion laptop with windows 7 ultimate (x 64). How can I turn off the light of the HP logo that keep on glowing, while the system is active, at the back of the lid of my laptop.