10g Grid Control with database 11g

Similar Questions

• Questions about 10g Grid Control (where/how)?

  Should install US 10g Grid Control on a separate machine, then our production database server or is it play nice on the same machine? The production server is a decent UNIX machine currently used 12 instances; We have capacity/room for EM if it will work well here. If this is the best on a separate machine, will be Windows 2003 (2 CPU 2 G of RAM) enough?
  
  The current databases are all 10.2.0.4 and configuration with Enterprise Manager on an individual basis. Should I remove or stop these agents EM if I go to the Grid Control?
  
  Thank you.

  You can certainly seven. database repository of WHO and in large installations, it is highly recommended. If you are going to hang Grid control for monitoring and alert you want as stable as possible to ensure the capture and alert as expected and breakdowns in the grid control functions affect not your ability to be alerted when monitored environment has a problem.

  It is not necessary that the repository of control grid and WHO will be on the same platform there fore mix windows and unix to the SGC and the repository is fine, but ensure that the environment will be as stable as you need it to be to achieve the objectives of grid control.

• Using the Grid control with the ALLOWED_LOGON_VERSION parameter

  Hello
  
  We use a 10.2.0.4 database and a 10.1.2.3.0 grid control (with its own 10.2.0.4 database) and WHO and the database are patched up to April 2010 CPU. We tried setting the SQLNET. ALLOWED_LOGON_VERSION = 10 in the SQLNET.ora of the database, but it seems as if the control grid or the agent cannot connect to the database. This is the error that we received from the grid if the parameter is active.
  ORA-28040: no authentication protocol matching (DBD ERROR: OCISessionBegin).
  
  I found no information on activate or not the ALLOWED_LOGON_VERSION if a grid control is followed by a database.
  
  Someone had this problem before?
  
  Thank you
  Francis

  Francis,
  I googled on "SQLNET. ALLOWED_LOGON_VERSION = 10 ". This leads me to SQLNET. ALLOWED_LOGON_VERSION here is a description of the bug 6051243. Seaching on My Oracle support for this bug led me to the notes 466939. Looks like you're running in this bug.
  Note 755605.1 gives you some solutions.

  Eric

• Is 10g Grid Control compatible with Database 11g R2?

  Hi all
  
  I tried the certificaction for grid control matrix in Metalink and it shows the latest compatible version of the database to create the repository is 11.1 also I do not know if he could watch a 11.2 database...
  
  If I try to install the usual way, I get an error of invalid version and if I use the silent mode, I'm stuck on an error, so I guess that, for now, it is still impossible.
  
  Any of you have had experiences like mine? I had planned to use it to administer Data Guard...

  If he could watch a 11.2 database...

  It can monitor, at least the basic functions, I added a database of 11 GR 2 targets being watched (more exactly the agent discovered it correctly). New features (and some for dataguard, too) are not yet covered. And it is not supported. 10g is not very accurate, is not the latest version 10.2.0.5 running on Windows Server 2003, don't know about the lower versions.

  The lack of official support, I would not included another 11 GR 2 databases in production environments.

  Werner

• Data Guard - Grid Control - Standby database

  Heys,
  
  now I have to Clusters RAC. The next step will be to set up a database on hold to prepare a graceful failover.
  
  But what are the next steps?
  I currently install GridControl on a separate host with the option: company Manager10g grid control by using an existing database
  The installation still work...
  
  What are the steps? All documentation? Tutorials?
  I need to install agents on each client in the cluster?
  As for name resolution?
  Any configuration of the necessary listener?
  The configuration is made via command line for the Data Guard?
  
  
  
  Christian

  Hello Christian,.

  Maybe you should have Data Guard documentation. Here's the URL:

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/TOC.htm

  There is also a section RAC.

  Greetings from Switzerland,
  David

  OCP 9i / 10g / 11g
  http://www.oratoolkit.ch/knowledge/HOWTO/installation/OTN.php

• Oracle Discoverer 4i (Portal db - oracle 8i) connectivity with database 11g problem

  Hi all

  We have oracle discoverer 4i with Portal db (oracle 8i).

  Connect to external databases by using links in the portal db db and reports will use the link db to retrieve data from views in external databases.

  External databases, we have been connecting is oracle 10g version and now we have improved these databases to version 11g.

  Now I have a created a new database link to this 11g database and I have created a new EUL in the portal to connect to this database 11g.

  But when I try to create a report using the discoverer of this new EUL after login for the discoverer we get an "Unable to connect to the database" error.

  We all have the privilege of necesscary to the user and the new database link works perfectly well. (when we try to query directly using SQL as database portal using this db link the query works perfectly).

  I'm not sure if it is a compatibility issue in accessing an 11g database since oracle disk 4i.

  Can any advise if this is the case and if there is no work around for this?

  Kind regards

  REDA

  You say that you are having problems with a link of database from 8i to 11 g (pl exact position of 4-digit versions)? If so, expect as database of links between these two versions are not supported. Is there a reason you can't pass the portal of databases of at least 10 g 2?

  See MOS Doc 207303.1

  HTH
  Srini

• 10g Grid Control - how?

  I have two servers named SAFLO1 and SAFLO2.
  SAFLO1 is an instance of UBIFIN with Oracle Enterprise Manager database and no other agent installed.
  I want to install Grid Control on the SAFLO2 server.
  I now - Questions
  What agents do I need to install on SAFLO1?
  Control grid requires a database to its repository?
  How to start and stop agents on the SAFLO1 and the SAFLO2?

  Take a look at [http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/firewalls.htm#i1005951] (figure 19-1). Agent sends data it collects to the WHO which stores it in the repository.

• 10g Grid control

  Hello
  
  I am running 10.2.0.1 database on windows xp 32-bit computer. Now, I want to download and install the grid control. I am looking for link http://www.oracle.com/technology/software/products/oem/index.html and when I develop "Enterprise Manager 10 g Grid Control Release 2 (10.2.0.x)"; " I found
  Oracle Enterprise Manager 10 g Grid Control Release 2 (10.2.0.2.1) for Microsoft Windows (32-bit) (re-released) for more details refer to Note 835608.1
  
  My question is, is it right to download and install correct; while I am running said 10.2.0.1 and control of grid for 10.2.0.2; so I'm confused because there is no grid control for 10.2.0.1 for linux is available, but not for windows.
  
  Thank you.

  It will work. The Readme will say as well. Unfortunately the Grid control has its own numbering of patch.

  -------
  Sybrand Bakker
  Senior Oracle BA

• Oracle 10g grid control access home page

  Hey tehre,.
  
  I use the oracle database 10 G R2.i can access my employer Manager homepage.but I need to create the database before using the enterprise grid control manager.
  
  I cannot access grid control homepage.can someone tell me how to access the same?
  
  What is the procedure to access through browser?
  
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on November 20, 2008 21:16

  I guess you mean database independent, control grid not centralized. The latter is a software separated, don't not part of a database facility. The standalone version is unable to create a database of pending, you need control grid for this.

  Werner

• 11.1 grid Control with 10.2.0.4 Agents

  Gurus,
  
  Please specify if we use 10.2.0.4 agents (those already installed) with upgraded 11.1 GC. (Upgrade to 10.2.0.4).
  
  Thank you
  Aditya

  Hi Aditya,

  You are welcome. If you think that your question has been answered, please close this thread to save time on digitization replied messages unnecessarily. Thank you.

• quick question: SGD for Grid Control redundant databases

  Dear friends,
  
  I wonder if it is possible to configure the redundant OEM Management Server databases on separate servers and how is who would do?
  
  I don't think to it is possible to have an agent write in several databases WHO, so how is possible to have our redundant OEM Management Server?
  Running DG the only option?
  
  Thank you.
  
  JI Li

  Install two agents on each target. One points to a WHO the other for other MSOS.

  This is the standard mode of operation.

• Grid Control 11g with 8i databases

  Hello
  
  I have a few databases 8i and noticed that they are not compatible with 11g but with 10g Grid Control that I use now.
  Means that they do not work in 11g GC or simply not supported?
  
  Kind regards

  user771256 wrote:
  Hello

  I have a few databases 8i and noticed that they are not compatible with 11g but with 10g Grid Control that I use now.
  Means that they do not work in 11g GC or simply not supported?

  As per

  Auditor Certification Oracle Enterprise Manager Grid Control [ID 412431.1]

  OEM 10 G GRID supports 8.1.7.4. databases. And through Oracle 11 G grid will not support.

  This means that you can continue to use, but in the case of any question, you will not be able to take the help of the Support of Oracle.

  But I'm sure that you can monitor the database 8i with 11G grid.

  I suggest you use the 10G agent for monitoring database 8i because with officials of 11 G you might face questions of database 8i.

  Concerning
  Rajesh

• Problem after 10g to the conversion of 11g with access ODBC application connection.

  We have recently updated one of our databases Oracle 10.2.0.4 on 11.2.0.4.0.  We used Data Pump export of database 10g and the new database 11g Data Pump import.  Everything went well.  We have several users who use an Access database with an ODBC connection to our Oracle database.  We installed 11g on their PC client and install the tnsnames file to point to the new database 11g.  We have a configuration read only account that everyone uses to connect to the Oracle11g database through the Access application.  We have a user who gets an error, even if this computer has been installed just like everyone elses.  She becomes an odbc error, that the account is locked.  I had the read-only account on our database 10g locked, so everyone would be forced to use the 11g database, because we could not completely stop the 10g database.  We have searched the c:\ drive and you can find 1 tnsnames file and it is directed to the new database 11g.  However when we unlock the account read-only on the 10g database, access works very well.  It is as if she is always directed to the 10g database, but we cannot find any link to it.  This user can also connect another pc that the ODBC connection to server 11g works with the access application and it does not work with them connected.  Any help would be appreciated!

  Our resolution is a slight reorganization of elements of Oracle in the Environment Variable Path in system settings Desktop/Properties/Advanced to ensure that the proper path containing the precise tnsnames.ora file was represented was just what he needed.

• Grid Control 11 g includes advanced replication management?

  The system that I administer currently Oracle Enterprise Manager 10g Grid Control to General administration, but he had to keep the old based on java Enterprise Manager to manage advanced replication. (All of the databases is currently Oracle 10 g. We plan to upgrade the databases up to 11g Release 2. The context is a central database with 16 knots that have views materialized update-able over them to subsets of the data.)
  
  I do research moving to Oracle Enterprise Manager 11 g. Manage Advanced Replication? Otherwise, what Oracle tool now provide or support for advanced replication management? The URL of a white or manual book or article would be a great help.

  Clark,

  If you do not find yourself still, Yes, he does. OEMGC can set up and manage advanced replication environments: http://oracle.informatik.haw-hamburg.de/server.111/b28326/repoverview.htm#i13140

  Eric

• Failure research Oracle Application Server when installing EM grid control

  Not to seek the Oracle Application Server during the installation of 10.2.0.3 on Windows XP EM grid control.
  I uninstalled the old database from Oracle 10 g and I have also remove all oracle related services and programs the services.msc and unregistry all related services of the registry Hkey. Now I install EM Grid Control with a new database.
  I don't have any MetaLink account now.
  Journal of G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands massage

  Command: oracle.sysman.emcp.agent.AgentPlugIn 

  The journal of C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43 messages...

  Starting Agent
  
  Command = oracle.sysman.emcp.agent.AgentPlugIn has failed 
  Exception : java.lang.Exception: 
  Management Agent Configuration Assistant is failed. 
  The following failed messages are recorded:
  
  configureAgent: Search on a non-RAC system:  Fail to search Oracle Application Server.
  
  Info: Configuration Assistant "Agent Configuration Assistant" is fail.
  -----------------------------------------------------------------------------
  *** Starting OUICA ***
  
  Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
  Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\
          configToolFailedCommands file, backing it up
  Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed
          Commands.bak
  Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry 
          Configuration Assistant. 
  ...

  Thank you for the help
  
  Published by: junez on December 27, 2009 10:17

  Please visit the following link. I think that is the key question.

  http://krsethur.WordPress.com/2006/06/13/uninstalling-Oracle-10G-manually-from-Windows-XP/