11g grid control fall into the SGD on the stage of Configuration of the WHO

Similar Questions

• How to set the threshold value for single tablespace in the 11g grid control

  Hello
  
  I want to set the threshold value for a single tablespace in the 11g grid control,
  Please give me a navigation path.

  Sandy wrote:
  Can you please give me the full navigation path?

  go to the target--> databases
  Select the database that you want to set this alert to
  Link select settings and policy settings

• 11G Grid Control Installation.

  Hello
  
  I need to install 11g grid control in a server, using the grid control, I need to maintain and manage 4 different databases, they are running in different servers.
  
  Please guide me what stage I must follow.
  
  Note:
  Each target, I need to install the management agent? and how to install the management agent?

  I suggest that get you the latest version on EM 12.10.2 rather than 11 g. You can install costs em 12.1.0.2 SGD and agents to install 12.1.0.2 on your DB. Agent note 11g will not work with 12 ch. SGC or vice versa.

  EM 11 g installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
  agent installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_agent_usng_console.htm#CACJEFJI

• Mounting root failed. Falling into the shell of the basic maintenance

  Hello

  I bought a AMD Phenom X 4 955 3.2 GHZ processor, card mother gigabyte GA-MA785GM-US2H in support / 6 GB DDR2 RAM / 500 GB SATA drive for Vmware ESX 3.5 learning product.

  In the above configuration, I have installed windows xp 64-bit operating systems and continue to install vmware workstation 6.5.

  Since the VM workstation, I can able to install ESX3.5 UPDATE2, but I was not able to start properly, please visit below mentioned error.

  "The root of mounting failed. Falling into the shell of basic maintenance.

  To collect newspapers for VMware, connect a USB storage device and

  Run "bin/vm-support.

  Machine will be rebooted when you get out of that shell. »

  The same has been tested on windows 2003 Enterprise Edition server / windows 7 32-bit / windows 7 64 bit also, please help me solve the problem.

  Hello

  So if I understand you well, then the configuration 'ESX in a box' now works for you, except that you see only a single error NUMBER?

  I am not convinced that NUMA is supposed to work in this environment, but I have no material here to test and verify your results.

  NUMA support requires specific BIOS and physical characteristics of the motherboard.

  Here are a few more documents on this subject.

  Ensure your hardware is working properly

  VMware ESX server monitor internal error * vcpu-0: make the bugNr = 17332

  In the VMkernel newspaper and on the ESX console error: CPU TSC:27393110 0: ACPI:998 0: no memory detected in the SRAT 1 node

  The second document has notes on how to disable the error if it bothers you.

  You can also try to increase the memory on the ESX host and see if that helps.

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• 11g grid control agent configuration

  Hello guys,.
  
  I have the problem with the configuration of the control agent Grid 11 g. The root cause of the problem is that the target machine is in the DMZ area. So, it lacks the active ports. Other agents, I have installed is working properly.
  
  The I'm talking about is able to download the data, but in the case of your setup I get the error message: "error occurred while obtaining information for the specified target. Possible reasons include: the target doesn't exist. failed to connect to the target. »
  
  Here, you're out of emctl agent status
  
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Home Agent: / orahome/agent11g
  File binary agent: agent11g/orahome.
  Agent process ID: 3011
  Parent process ID: 2985
  Agent URL: https://demodb:1830/emd/main /.
  URL of repository: https://admin:4900/em/upload
  Started at the: 2011-02-11 10:23:43
  Started by user: oracle
  Last reload: 2011-02-11 10:39:40
  Last download successful: 2011-02-11 17:04:08
  Total megabytes of XML files uploaded so far: 20.98
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 14.21%
  Last pulse in SGD: 2011-02-11 17:13:05
  ---------------------------------------------------------------
  Agent is running and ready
  
  emctl status who-details
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  Enter the password to Root of Enterprise Manager (SYSMAN):
  Console server host: admin
  Console HTTP port: 7788
  Console HTTPS port: 7799
  Download HTTP port: 4889
  Download HTTPS port: 4900
  SGC is not configured with the PES or virtual host name
  Download of the agent is locked.
  SGD console is locked.
  CA active ID: 1
  
  Active ports:
  Admin to demodb-1830
  of demodb to admin - 4900, 4889
  
  What other ports available to be activated? 1521?
  
  Thanks in advance!
  Good day

  Then I think it's time to start checking the logging firewall product to see what the port is blocked and why it is blocked. Ask your technical firewall guys/girls so he or she can do. Otherwise, it will become a never-ending story.

  Eric

• Oracle 11g grid control software agent for SUSE 10.2 64-bit Linux.

  I have a hard time locating the agent software from the grid control, for 11g on Linux SUSE 10.2 64-bit. Does anyone know where it is? I checked the download for linux 64-bit software, nothing seems as the agent of the grid control. I searched metalink and these forum. Please let me know if you know where I can find. Thank you.

  Hello

  It is not the version 11g agent or SGD.
  I use
  Agent version: 10.2.0.4.0
  Version of the WHO: 10.2.0.4.0
  Protocol version: 10.2.0.4.0

  to take charge of our 11g db and I have no problem.

  Kind regards
  Tom
  http://OracleDBA.cz

• A simple question - use of 11g grid control

  As I was trying to know the name of the database - for a particular server and schema - of course I don't know the name of the server and schema - however I am not able to find the database associated using the Grid control.
  
  I wonder if there are any good book on control areas (11 g) network manager - how to find the various parameters and how to interpret the metadata for databases, servers, patterns tables etc. backup recovery

  I always start with Oracle on line documentation. They update frequently. Here is the URL for 11g EM:
  http://docs.Oracle.com/CD/E11857_01/index.htm

  L Sallwasser

• 11g grid control, agent unreachable

  Hello
  I saw in Grid control for a specific database, displays the message error: Agent unreachable.
  
  go on this server, do.
  
  Agent status $emctl
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Server: Lotus Expeditor Web Container/6.1
  Content-Type: text/html
  Content-Length: 122
  
  ---------------------------------------------------------------
  Agent runs but not ready
  
  
  
  Any idea?
  
  Thank you
  
  Edited by: 951932 29 August 2012 08:17

  Look for them
  $AGENT_HOME\sysman\log\emoms.log and $AGENT_HOME\sysman\log\emoms.trc and take action

  Normally below a series of steps should help:

  . / emctl stop agent

  . / emctl clearstate agent

  . / emctl unsecured agent

  . / emctl upload agent

  . / emctl secure agent

  . / emctl status agent

  Published by: renee_mathieu on August 29, 2012 08:24

• 11g grid control agent configuration - rac

  Hello everyone,
  
  Please could check my problem with the rac server configuration?
  
  [oracle@s28rac2 bin] $. / emctl status agent
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Agent home: /orahome/agent11g/s28rac2.bscpraha.cz
  File binary agent: agent11g/orahome.
  Agent process ID: 20149
  Parent process ID: 20131
  Agent URL: https://s28rac2.bscpraha.cz:3872/emd/main
  URL of repository: https://s28admin.bscpraha.cz:4900/em/upload
  Started at the: 2011-02-22 15:09:59
  Started by user: oracle
  Last reload: 2011-02-22 15:09:59
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0.00
  Number of XML, files awaiting download: 35
  Size of the XML files in the upload wait (MB): 33.12
  Available disk space on the file upload system: 15,17%
  Last attempt heartbeat to WHO: 2011-02-22 15:11:19
  Last pulse in SGD: 2011-02-22 15:10:18
  ---------------------------------------------------------------
  Agent is running and ready
  [oracle@s28rac2 bin] $. / emctl upload agent
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  MDT download error: could not download the file A0000001.xml: HTTP error.
  
  Same problem is on the second node, but it is disabled by the Download Manager. No note is located inside the control grid - setup-> blocked agents...
  
  Thank you!

  You ensure the Agent?

  emctl security officer

• New headphones intras iPhone 6s continue to fall into the ear

  Just bought my first iPhone. 6 S.

  I'm learning all about the phone but I am EXTREMELY disappointed by the total pointlessness of the headphones.  They do not stay inside my ear for more than 10 minutes before falling.  They also fall at the slightest tug of the cable.

  What are some alternatives to the current iPhone headphones work just spent about $900 on my iPhone.   I don't want to start shelling out the money for a different pair.

  I'm certainly not the only person who has come across this.

  Thank you

  B

  Someone at - it solutions?  turns out I can't go back and change my original question, so I answer to my own post.

• Disable Drag & amp; Fall into the tree for some nodes

  It is very easy to enable Drag and Drop on tree control. How can I disable certain nodes to be trained? I didn't need all the nodes to be draggable.

  The trick is not to use the tree drag * properties of the control, but use the DragManager rather custom make drag and drop.

  This allows to listen to the mouse down events and to assess whether useDragManager.doDrag () to launch a Cannonball.

• 11G Grid control - target is temporarily in the State pending state.

  Hello
  
  I use 11G SGD, where at one point that I see several target unknown with the message "target is temporarily in the State pending state."
  
  There are different databases running on different hosts show the same error.
  
  Thank you
  KSG

  KSG,

  You can try to get the status & loading/reloading, last download time & target monitored under commands on agent
  Have also check in/etc/hosts to the agent host must be in format below
  hostname nomhote.nomdomaine

  Check ping telnet for connectivity between the agent & SGD

  Console HTTP port: 7789
  Console HTTPS port: 7800
  Download HTTP port: 4890
  Download HTTPS port: 4900
  Agent port: 3872
  Repository port: 1521
  Central Console port Enterprise Manager = 4889
  Central Enterprise Manager Port Secure Console = 1159

  emctl status agent
  emctl upload
  emctl reload
  emctl config agent listtargets 
  

  Thank you
  Ajay more
  http://www.moreajays.com

• How to limit HTTP access for 11g Grid Control

  Hello
  
  We want to restrict HTTP and want to use only HTTPS to access the control grid.
  One please suggest what settings need to be changed.
  
  Thank you
  Paul

  Hello

  The following command has been introduced to limit access to the console for https only:

  emctl secure lock - console

  Best regards
  Vincent

• my iPhone 6 fall into the sink, what to do? :(aider s'il vous plaît)

  I turn it off after that I saw a blur on the screen and let dry

  Unfortunately, the iPhone is not waterproof. Usually, phones and water do not mix, and water damage are not covered by the warranty. Corrosion has already begun.  You must schedule an appointment of engineering to the theApple store to evaluate the level of damages. They will offer you the best solution.

• Possible to customize 'Size of the Scan' fall into the HP scanning application?

  Hello community HP,.

  I use an OfficePro 8600.

  HP application scanning has a scan drop-down size that offers you a number of choices, but also a choice custom type dimensions customized to your paper/photograph.  I performed the task of digitization of photographs of family a lot of old of the life of my parents and grandparents.  It would be convenient that I could customize options in the menu size Scan drop-down on the HP scanning application to be sizes that I have to go quickly. Currently, I have to go several times in the custom element to type the dimensions directly when I come across a picture of a different size.

  Anyone know if this is possible?  I am comfortable working with the registry of Windows and system files, if necessary.  Thank you.

  Kind regards

  Sean

  Hello

  No - you can do this automatically UNLESS you can build a sensor to tell the size of the originals, BUT you can create the tamplates (called shortcuts) and save them. The next time you select a shortcut and it will scan you want, no need to enter again the options.  There are some pre-built in there, you can create more of your need.

  Kind regards.