Why the Touch i.d. stops working?

Similar Questions

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• The yellow light that locks / unlocks the touching mouse pad stopped working

  Hi, last week I couldn't block touching my laptop mouse 4720 s probook. The light shows just not when I double click on it. It simply no longer works. Here I need to download the software again?

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145330&prodNameId=4145205&swEnvOID=4058&swLang=13&mode=2&taskId=135&swItem=ob-101045-1

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

  HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

  Try these standard troubleshooting steps in the following order:

  Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

  See here for more details on the restoration: https://support.apple.com/en-us/HT201252

  If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

• Why the Windows performance index stops working during the performance of the Aero from Direct3D 9 assessment?

  All the drivers are up to date. System: Intel T2400, 512 MB Ram, Nvidia GeForce Go 7400 192 MB (128 MB dedicated), Windows 7 32 bit. Also here is the last section of the report winsat under Windows\Performance\Winsat. Thank you in advance.

  2153905 (3272) - winsat\logging.cpp:0815:-START 2009\12\4 13:36:54 -
  2154093 (3272) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 1b975d4c-b5de-43d5-97ff-d7d2096d0fa6
  2154233 (3272) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  2154483 (3272) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  2154576 (3272) - 4585: Watch dog system active
  2154576 (3272) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  2157883 (3272) - winsat\main.cpp:2490: > DWM running.
  2165902 (3272) - winsat\main.cpp:2497: > turn off DWM.
  2166011 (3272) - 2470: > EMD service will be restored to the exit.
  2168070 (3272) - 0983: > read the active power as «8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c» mode
  2168179 (3272) - 2793: > power policy saved.
  2171939 (3272) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  2171955 (3272) - winsat\main.cpp:2814: > policy set to maximum power.
  2173171 (3272) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  2173171 (3272) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  2173187 (3272) - winsat\main.cpp:1775: > Run Assessment features
  2173624 (3272) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock

  Hello MutluSimsek,

  Thanks for posting on the Microsoft answers Forums.

  Using his computer in a clean boot State.  Then open a command prompt (type cmd, then run as administrator).

  WinSAT formal type

  Press ENTER.

  I hope that this answer to your questions, if you need further assistance please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• HP 15 laptop: touch screen has stopped working

  I have a HP TouchSmart laptop computer model 15-f010wm, product number J8A22UA #ABA, 8.1 with Bing 64-bit Windows.

  The first day of the 3-4, I used this computer it worked like a charm. I loved. Now a few times touchscreen will work for about 5 min and then stops or does not work. When it stops working, I get a pop up in the lower right corner that says: the last USB device not recognized USB device you connected to this computer has malfunctioned, and the window does not recognize. (I have not plugged anything in this computer but except the power cord)  When this happens and you go to Device Manager sometimes, there will be a yellow! triangle under the Human Interface Devices drop down and some times yellow! triangle will be under Universal Serial Bus controllers list down. And if you go to they system screen line Pen and touch passes to no. Pen or press enter is available for this view.

  I tried to do a system restore. Also, I did a test fast system and a comprehensive system. The results have been the primary battery check ok and all the others said past. And of course I can't make the screen test because the touch screen does not work.

  Please help me with this. My computer was a gift, my other is really old and was ready for an upgrade. I've never had problem with HP before.

  Hi @Jen81 ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• Why Photoshop CC 2015 suddenly stop working?

  Why Photoshop CC 2015 suddenly stop working?

  Go first, install the updates. You should be on 16.1.2.

• Why the object_not_found exception does not work?

  Posters,
  
  I have the following statement in a package.procedure:
  
  -- (...)
  Start
  
  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double
  -- (...)
  
  exception
  When dbms_metadata.object_not_found then
  null;
  
  end;
  -- (...)
  
  Execution is stopped in the select, not enter the exception and the following message is displayed in PL/SQL Developer MicroHelp:
  
  + "ORA-31608: specified object type INDEX not found." + "
  
  I did it another way by adding the following clause:
  
  -- (...)
  Start
  
  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double
  where exists (select 1+)
  of all_indexes+.
  where table_owner = 'OWNER'+.
  and table_name = sTableName); +
  -- (...)
  
  exception
  + When no_data_found then +.
  null;
  
  end;
  -- (...)
  
  It works, but: why the object_not_found exception does not work?
  
  Thanks in advance for everyone!
  Philips

  Oh I just noticed:

  What happens if instead of this:

  Select dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName)
  in the cDDL - clob for index DDL
  of the double

  you say:

  cDDL: = dbms_metadata.get_dependent_ddl ('INDEX', 'OWNER', sTableName);

  ?

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• The brightness keys have stopped working

  the brightness keys have stopped working, with or without pressing the FN key

  Can you please tell us which model of laptop and operating system do you use? I assume you are using Win8 or Win8.1 right?